Very late reply (2024) great video as this has helped me to refit the heater cable that came off of my Citigo as we couldn,t find out how to remove the glovebox to gain access.Thankyou and well done.
I'm very impressed with your work and you look young, very good hands and knowledge, you want to get the adverts in to help costs a litte for the channel 😉
Great job Nathan I’ve just purchased my first vw up move up the screenwash bottle filler at top isn’t connected to front of car there is a hole and slot but doesn’t seem to be anything filler cap connects to thanks.
Really enjoyed your video fella, got a tsi, just wanted to see how its put together. I used to assemble car interiors from the factory for various car manufacturers here in the UK and went on to quality and customer visits and fault rectification. Its no easy job learning a vehicle, you should be very proud of your work. You did a proper job there.👍
Great work chaps. Very useful too thanks, been looking for a video to help me take apart my Citigo to install a few things and it's the best one I could find
You might add glove box removal to your keywords in the description cuase that is what I was looking for. Found it luckily and hope it will work out that way. Looked far more easy on the german VW Up repair side. Not a word about the center console and its removal.
Awesome video mate. You make things look easy. I’ve always stayed away from cat s cars but after watching this I have hope I can also do it. Thanks man 👍
Great content Nathan, clear and well explained thank you. You deserve more subscribers, maybe a name change to include the word Salvage might help. Good luck with your channel.
Hi, just discovered your channel, great content your very competent for a young man...keep up the great work looking forward to the next video. Regards kev
Im doing a vw up at the minute too. Loved the detail you've gone to better than the other guys that are doing on here. How much did you pay for the airbags? Where did you buy it from?
Thanks got Asda means a lot and I bought the dash board kit and all the rest of the parts to repair the car from www.vwupparts.com really sound guy and I paid £675 for the complete dash kit which is the going rate for a facelift dash kit
This video Is helpfull alot! Thanks dude! But I can not see how to remove and install de A-pillar trim, maybe ir youn still have footage or instructions about It... Thank you anyway! Great work! Great videos!
Hey mate nice work! Do you know if it would be possible to retrofit a MFSW (Multifunction steering wheel) with buttons? Question is whether there is a wiring hardness and if not is it feasible at all to attempt?
Hi Nathan. Which is the size of the screw driver to remove the steering wheel in this Up? I need to replace mine and put a sporty one but I do not know which screw I have to use and the diameter of the steering column groove, to order my new steering wheel.
Nathan, what was the faultcode from de powersteering?? and what was it to reset the powersteering?? mine doesn,t work now its a 12-2015 Seat Mii. Thanx in advance. regards JO
Hi Nathan, I have repaired a Audi A1 30 TSI 2020, it had damage t the passenger side and needed the drive shaft and the suspension arm replacing, the air bags were deployed too. I have now fixed all the mechanical damage and now need to sort out all the electronic stuff. The steering wheel is very heavy and mechanic says it is a electronic reset fault. I have had a diagnostics done with a several fault codes the mechanic does not understand. Can you please advise how I can reset the steering please?
@@NathanHiley Hello, thank you for the answer, I installed the airbag successfully and there was no problem, but the steering light is on and the error Crash shutdown has been triggered? I could not clear the error, thank you for your help🙏
excellent video...just starting watching your channel and its very intresting that a young man as so much knowledge about cars...what code reader are you using by the way? keep up the excellent work.
@@NathanHiley any chance you could do a vid of getting it out of crash mode or you know which module I need to reset to get mine out of crash mode. Cheers mate
Ofcourse I’ll be working on the up this weekend so I’ll include how to remove the crash mode so then the electric steering will work again thanks Nathan
Hi Im guessing your airbags have gone off if so all that is required is to replace which ever air bags and seat belts that have gone of and crash sensor and the air bag module will reset with diagnostics like most modern VAG group cars . If that’s not the case and you air bag module is faulty it’s under the centre console hope this helps
@@NathanHileythanks for your help. No Airbag wasn't deployed but the front crash sensor has crash data recorded because it's a front impact crash. Can I use VCDS software to do the SRS Reset?
You said airbag when fitting the seatbelts, pre tensioner. You can have them sent away and get them reset just for future info. Nice video. Why did you remove the front shock if there was no damage?
My mistake haha but you new what I meant. I’ve had belts redone before but still came up with fault code so dont bother with them anymore and what ever car I repair if it’s had a hit to the suspension I replace everything as previously I did a Skoda Citigo with a bent wishbone leg and hub looked fine untill I took the car of axel stands and the wheel was still crabbing which was due to damaged shock and hub so now I replace every time to save time
The front struts appear to be quite fragile I repaired a cat D Citigo earlier this year. Minor side swipe but a bent strut too. The guy at VW parts was really helpful and great prices.
Hi arif it’s a copy of launch if interested search these guys on Instagram diagsolutions I’ve bought from them for last 7 years great business and great products
Thank you and I’ve got half of a video done but then when ever I had some spare time it rained then tier 4 happened and misses just gave birth to my second son on news years Eve . Hopefully the next couple of weeks I’ll have part 4 out and need to get bidding on some more cars
About the passenger airbag, could anyone perhaphs confirn wether if it needs the orange clip to be pushed in to lock, to prevent a dashboard light error?
Hi dc-nh and yes it needs the orange clip to the the wiring plug into the air bag which then makes the circuit if not there will be a open circuit and will give you a fault code and air bag light
@@NathanHiley need to take another looksy at it then, got it connected and thought also pushed the orange clip back but still got an error. Thanks still.
A lot of earlier VAG group Skoda had bolt in passenger airbag units, Fabia mainly, but it's more profit for the manufacturer to supply the complete dash rather than an airbag module.
Hi banksy2012 sorry for no content at the min . I have half of a video already filmed . But due to bad weather when I had time to do the car and then tier 4 as I don’t keep the cars at my house and my partner just gave birth to my second son on New Year’s Eve so hopefully in the next couple of weeks I’ll have a new video and need to get bidding on some more cars
Excellent upload, I have to replace the one on the GTI this has saved me a bit of stressing
No worries mark and don’t worrie that the power steering isn’t working on yours it’s just been deactivated from the airbags being deployed
Thanks for the heads up Nathan, you really know your stuff 😊
Very late reply (2024) great video as this has helped me to refit the heater cable that came off of my Citigo as we couldn,t find out how to remove the glovebox to gain access.Thankyou and well done.
Great content fella for such a young lad your doing great well done
Thank you William and I bet I’m older than you think 😉😂
Well done for a young man you look like you now want you are doing hope it all works out for you will be looking forward to seeing more video
I'm very impressed with your work and you look young, very good hands and knowledge, you want to get the adverts in to help costs a litte for the channel 😉
Good to hear you know what torques to be used 👍
Excellent video, and well done with the install. Helpful for my Seat Mii
Thank you and hope the video helps you
Great job Nathan I’ve just purchased my first vw up move up the screenwash bottle filler at top isn’t connected to front of car there is a hole and slot but doesn’t seem to be anything filler cap connects to thanks.
You could go far, You remind me when Wheeler Dealers started, best of luck.
This car is an almost identical stablemate of the Škoda Citigo, I really enjoyed owning my Citigo, they are ideal town cars!❤️.
Really enjoyed your video fella, got a tsi, just wanted to see how its put together. I used to assemble car interiors from the factory for various car manufacturers here in the UK and went on to quality and customer visits and fault rectification. Its no easy job learning a vehicle, you should be very proud of your work. You did a proper job there.👍
Just catching up on your videos mate. Very enjoyable. Great work!
That's exactly what I searched 😍 Thanks man 😍
No worries hope the video helps 😀
Hi! Just found your channel today. Great info and not drawn out like a lot of channels👍
Your videos are very good
Hey mate, great job with the VW up , expert work
Thank you fadi emil
Great work chaps. Very useful too thanks, been looking for a video to help me take apart my Citigo to install a few things and it's the best one I could find
You might add glove box removal to your keywords in the description cuase that is what I was looking for. Found it luckily and hope it will work out that way. Looked far more easy on the german VW Up repair side. Not a word about the center console and its removal.
Awesome video mate. You make things look easy. I’ve always stayed away from cat s cars but after watching this I have hope I can also do it. Thanks man 👍
Good job Nathan top quality work good attention to detail best of luck with the channel looking forward to the next videos👍👍👍
Thank you Oliver means a lot hopefully will be working on the up and filming on Saturday so new vid will be up Saturday evening / Sunday
nice video, good job.
Thank you lee
Nice work Love from 🇩🇰😎🤟
Great content Nathan, clear and well explained thank you. You deserve more subscribers, maybe a name change to include the word Salvage might help. Good luck with your channel.
Good Job, Like the Vid. you make it look so simple well done keep up the great content ! M
Thank you mannan i will have some more content very soon
Really good video keep up the good work 👍
Cheers Paul 👍
Hi, just discovered your channel, great content your very competent for a young man...keep up the great work looking forward to the next video.
Regards kev
Im doing a vw up at the minute too. Loved the detail you've gone to better than the other guys that are doing on here.
How much did you pay for the airbags? Where did you buy it from?
Thanks got Asda means a lot and I bought the dash board kit and all the rest of the parts to repair the car from www.vwupparts.com really sound guy and I paid £675 for the complete dash kit which is the going rate for a facelift dash kit
very nice ! i love every bit
Good content, all I will say is that personally I'd unplug the battery before doing any air bag work
Got a few more mins in and hear you've done just that, good stuff
This video Is helpfull alot! Thanks dude! But I can not see how to remove and install de A-pillar trim, maybe ir youn still have footage or instructions about It... Thank you anyway!
Great work! Great videos!
Hey mate nice work! Do you know if it would be possible to retrofit a MFSW (Multifunction steering wheel) with buttons? Question is whether there is a wiring hardness and if not is it feasible at all to attempt?
Hi Nathan. Which is the size of the screw driver to remove the steering wheel in this Up? I need to replace mine and put a sporty one but I do not know which screw I have to use and the diameter of the steering column groove, to order my new steering wheel.
thanks nathan a very good video keep up the good work your doing
Brilliant
Nathan, what was the faultcode from de powersteering?? and what was it to reset the powersteering?? mine doesn,t work now its a 12-2015 Seat Mii.
Thanx in advance. regards JO
Can you tel me what tool is needed to remove the steering wheel? So I can check before I start to disable mine. Thanks in advance.
Hi Nathan,
I have repaired a Audi A1 30 TSI 2020, it had damage t the passenger side and needed the drive shaft and the suspension arm replacing, the air bags were deployed too. I have now fixed all the mechanical damage and now need to sort out all the electronic stuff. The steering wheel is very heavy and mechanic says it is a electronic reset fault. I have had a diagnostics done with a several fault codes the mechanic does not understand. Can you please advise how I can reset the steering please?
Thank you very much for your effort
Hi mate, did you also change the airbag module and was it necessary to change the crash sensor. Tia
Hi great content,I've just subscribed
Awesome vid, any chance you can advise how to remove the A pillar trim? I am having all sorts of trouble !
what tool kit would u recommend to have/use for this kind of jobs (stripping interior and exterior parts)
Yo man! Great Job! One question, what for read program do you use for read/clean/rest etc codes? And what did it cost? I want i very much! Keep up
Did the a pillars have to come off?
Hi mate got a yellow airbag light on has had rear impact but no airbags deployed do I have to change the sensor or just get the code cleared
Hi what diagnostic are you using thanks 👍👍👍
Hi Nathan.
Love your videos. Can I ask what diagnostics tool you used in this video? As I’ve tried to search through but can’t find it. Thanks!
I’m currently and have been using launch x431 for the last 3 years p.s it’s had a big update last year so it will look different to this video
Hi, thanks for your video, I have such a car and I changed the airbag. But why is the steering light on and the steering on? Thanks for your tips
Hi Mohammad have a watch on part 4 of the up rebuild or the dashboard removal and install on my Fabia rebuild and you’ll see what you need to do 👍
@@NathanHiley Hello, thank you for the answer, I installed the airbag successfully and there was no problem, but the steering light is on and the error Crash shutdown has been triggered?
I could not clear the error, thank you for your help🙏
Nice job.
yes it took me 7 hours from begin till ready with the dash
Congrats mate hope the video helped you with your dash swap
@@NathanHiley now i must get the codes cleared. powesteering light, tirepressure light, seatbelt light and airbag light are on.
Brasileiros, bora salvar esse vídeo. Muito mexânico por aí não sabe mexer nisso. Mostra pra eles.
You made short work of that just found your channel
Hi Nathan can I ask you for a price recommendation on a UP please
Bonjour beau travail
bonjour hugo et merci
Excellent work, and great attention to detail. Have you done this before?
I John I’ve been rebuilding damaged cars for the last 2 years in my spare time
@@NathanHiley very good. Keep it up
New subscriber
What diagnostics do u use? I noticed it was on an I pad
excellent video...just starting watching your channel and its very intresting that a young man as so much knowledge about cars...what code reader are you using by the way? keep up the excellent work.
Also the new Dash has a hole to retrofit the phone cradle, the old one you have to cut... sucks. I'm looking at an up! and it has the old style dash.
Hi got a corsa form auction and i replaced the headlight but it's still showing check headlight on the dash
Has that up gone into crash mode? I see the steering wheel light was red on the dashboard
Hi mate and correct yes it has
@@NathanHiley any chance you could do a vid of getting it out of crash mode or you know which module I need to reset to get mine out of crash mode. Cheers mate
Ofcourse I’ll be working on the up this weekend so I’ll include how to remove the crash mode so then the electric steering will work again thanks Nathan
Hi Nathan,do you have a video for removing the Airbag ECU module and where is it located in the car
Hi Im guessing your airbags have gone off if so all that is required is to replace which ever air bags and seat belts that have gone of and crash sensor and the air bag module will reset with diagnostics like most modern VAG group cars . If that’s not the case and you air bag module is faulty it’s under the centre console hope this helps
@@NathanHileythanks for your help. No Airbag wasn't deployed but the front crash sensor has crash data recorded because it's a front impact crash. Can I use VCDS software to do the SRS Reset?
nice work mate - what software are you using to work on the air bags?
Cheers m’s hub and Launch x431pro
really good thanks
You said airbag when fitting the seatbelts, pre tensioner. You can have them sent away and get them reset just for future info. Nice video. Why did you remove the front shock if there was no damage?
My mistake haha but you new what I meant. I’ve had belts redone before but still came up with fault code so dont bother with them anymore and what ever car I repair if it’s had a hit to the suspension I replace everything as previously I did a Skoda Citigo with a bent wishbone leg and hub looked fine untill I took the car of axel stands and the wheel was still crabbing which was due to damaged shock and hub so now I replace every time to save time
The front struts appear to be quite fragile
I repaired a cat D Citigo earlier this year. Minor side swipe but a bent strut too. The guy at VW parts was really helpful and great prices.
Good shit man
Nice job fella really nice car. If you don't mind me asking where did you learn all this stuff hats off and we'll done 👏👏👍
Hi mate what diagnostic tool do u use ?
Hi arif it’s a copy of launch if interested search these guys on Instagram diagsolutions I’ve bought from them for last 7 years great business and great products
Looking good, So where's part 4?
Thank you and I’ve got half of a video done but then when ever I had some spare time it rained then tier 4 happened and misses just gave birth to my second son on news years Eve . Hopefully the next couple of weeks I’ll have part 4 out and need to get bidding on some more cars
Could you tell me what diagnostic device you use great video 👍🏻
launch x431 pro
What are you using to recode and check faults
Hi I’m using Launch x431 pro
Is that an app?
Do the rear seatbelts lock up after a crash or just the fronts?
Hi Just the fronts
In that level of car, in a lot of the larger VAG group cars it will lock all 4.
Nathan, how long dose it took to change the complete dashboard? i have to do one from a Seat Mii . Regards JO
If you haven’t done one before I would definitely say around a complete day . Take your your time and good luck it’s not a bad job tbh
@@NathanHiley Thanx
Nath... Who are you using for paint these days
Hi Matthew I use classic bodyworx
@@NathanHiley where are they mate down farcet fen?
About the passenger airbag, could anyone perhaphs confirn wether if it needs the orange clip to be pushed in to lock, to prevent a dashboard light error?
Hi dc-nh and yes it needs the orange clip to the the wiring plug into the air bag which then makes the circuit if not there will be a open circuit and will give you a fault code and air bag light
@@NathanHiley need to take another looksy at it then, got it connected and thought also pushed the orange clip back but still got an error. Thanks still.
What was the diagnostic tool used?
Hi it’s launch x431 pro
I don’t understand why this 2019 has the old MFD ?
Also why haven’t you disconnect the battery .
The negative terminal was disconnected. before connecting up the new airbags , seat belts and crash sensor
What happens to the old dashboards?
Will be thrown away as has no use as airbag has deployed
That's nuts. Not great for the environment how they're designed.
A lot of earlier VAG group Skoda had bolt in passenger airbag units, Fabia mainly, but it's more profit for the manufacturer to supply the complete dash rather than an airbag module.
Why have you stopped with the videos Nathan?? Its been 2 months now, hope everything is ok
Hi banksy2012 sorry for no content at the min . I have half of a video already filmed . But due to bad weather when I had time to do the car and then tier 4 as I don’t keep the cars at my house and my partner just gave birth to my second son on New Year’s Eve so hopefully in the next couple of weeks I’ll have a new video and need to get bidding on some more cars
@@NathanHiley oh congratulations mate
@@NathanHiley I love the car I want one
That laptop software looks like a crp touch pro
Why didn’t you take the steering wheel off first.
Brave beaver 57
Hey, name your episodes. This one doesn't say ep3
Thanks for heads up I’ll get it updated was having issue uploading last night took two attempts
I can't get the bloody centre panel off. th-cam.com/video/vzL4PNxddyM/w-d-xo.html