I have Got This (100V - 10A) Meter and i have found that 2 Adapters was written 9V and Coming 17V :D and another 13.3V and coming 6.5V. Now About Meter: You Can Use Meter Only With AC Adaptor Or Battery - To Turn on. Use Minimum 3V Maximum 12V and Maximum 1.5A. Use thin red (+) and thin black (-). thick Red - is changing Pulses thin Yellow - also changing Pulses thick Black - also changing Pulses 1) Volt measures thin Yellow and thick Black 2) Volt measures thin Yellow and thick Red 3) Amps measures thick Red and thick Black
@@SandClockCinema It looks like a DIY project. I can't show you how to make that one but I can point you to a website that has dozens of DIY bench power supplies... www.instructables.com/Bench-Power-Supply-Tutorials/
Many thanks your tutorial, creative and unics. Bravo ducssess
so......... you made a box, well done.
Very Good...!!!
Cool! I WILL TRY THIS METHOD THANKS!
Great volt & amper meter...
Many thanks guys for very useful videos.
Valeu!
Grato!
Show de bola a montagem!
Abraço!
Ok so where is the pvc pipe that the unit is supposed to be made from ,or did i blink and miss it ?
Fantástico!!! Muchas gracias !!!
Terima kasih....sangat bermanfaat 👍👍👍
I couldn't see how you cut the fiberglass in the video.? (TÜRKEY)
When to use the red wire
How we can measure the AC voltage and Ac amp with this your meter.
Anil Kumar Goel
Video should be named: how to make an acrylic box and wire an (already made) volt/amp meter
Thank you
Can you fine tune the ammeter reading to properly zero it with no current?
yes, on the back of the voltmeter there are two screws one for voltage adjustment and one for current adjustment
Without any load, why amps is showing..??
I'm assuming because of a resistor
Don't you need shunt resister?
The shunt is built into the meter he used.
mantap👍
dobre
J NAT bolt gulo use korecen egulo ki extra vabe kinte paoya jay
Gele...
Egulor nam ki ?
Super
I have Got This (100V - 10A) Meter and i have found that 2 Adapters was written 9V and Coming 17V :D and another 13.3V and coming 6.5V.
Now About Meter:
You Can Use Meter Only With AC Adaptor Or Battery - To Turn on. Use Minimum 3V Maximum 12V and Maximum 1.5A. Use thin red (+) and thin black (-).
thick Red - is changing Pulses
thin Yellow - also changing Pulses
thick Black - also changing Pulses
1) Volt measures thin Yellow and thick Black
2) Volt measures thin Yellow and thick Red
3) Amps measures thick Red and thick Black
Which wire connect which wire you are not shown in this video.why are you telecast this video.
At 11:30 what is that your using?
It's just a power supply to demonstrate that the meter reads voltages.
@@dragon940carp6 is it a diy power supply? If so can you show how to make it?
@@SandClockCinema It looks like a DIY project. I can't show you how to make that one but I can point you to a website that has dozens of DIY bench power supplies... www.instructables.com/Bench-Power-Supply-Tutorials/
THANKS
Welcome
A error of 30 mA without load is too. Bad device.
Can you send the circuit diagram
да круто не спорю! лайк и подписка много интересного для новичка!! а если что ни будь спрошу подскажешь!???
Pleace send a Circuit Digramm
Without commenting and wiring diagram not understand, time waste in starting and wiring assembly will very fast so video pouse and watch.
I want 1000volts dc amp meter
Wat is the name of tat screw u used??
Bharath Kumar pcb spacers
Sir please make a CNC machine
Sure, In future.
Oranlar birbirini tutmuyor.eksik gösteriyor
Not acquired to voltage
improve your power supply!!
Kendisi birşey anladiysa Arap olayım
Abe 350 rs. Ka tu display laya hai,phir dibba banaata raha,RS 500 ka multi meter nahin kharida jaata kya.moorakh
Ang huzay mo master naintindijan mo ginagawa mo...
Off automatic
"How To Make Multimeter From PVC Pipe" - what, no electronic components at all ??????????
Click-bait rubbish !!
very past video
.
Tekyou