Yep, called staggered splice...avoids shorting.
@@liboy9844 any time you break a single run of wire it increases the risk. But if you absolutely have to splice wire nuts are better than this bs.
@@johnwaldrop3992
Sorry sir but what do you mean by ‘wire nuts’? Is it the same as ‘terminal block’? Please clarify 🤔.
its common practice to stagger splices. even with appropriate inline connectors.
I needed this 4 days ago!
Trust me i already have tried this once before and.. The entire upstairs power completely shut off and i had poor vision for the next 4 days after a huge flash happened
The only way that would happen is if you did it improperly, its a pretty garbage trick not gonna lie, but you did it improperly 100%
you just connected it wrong it should work with that "trick" but its definitely not safe in the long run especially after that mf shortened the earth if you're reconnecting cables use the fucking reserve bc if something pulls on the cable for whatever reason the earth is the last cable to disconnect which can safe your ass
@@Alberto-sv1ou Yeah i know because i literally just put them together no proper stuff or any of that just.. Put them together
Three words: heat shrink tubing
@@jaeger3211sec Solder*** Sure, they're good but I'd rather have a more stronger connection especially if wanting a permanent connection.
doctor: operation sucesfull but you have 24 hours to live
Thank you for posting this, I’ve been doing this for 30 years and very seldom do you see it on the Internet?
Don’t do this it’s gonna make the shorter side a pain to work with and it’ll prolly piss off the next guy to work there
Вот да. Полностью согласен. Во первых обрезанный короткий провод это довольно таки паршивая затея. А во вторых можно сильно удивиться обнаружив смену полярности относительно цвета. Я долго думал почему у меня в чёрном проводе плюс...
Instructions unclear the microwave blew up and there is a toaster goblin
teacher: don't make a bicycle, this question is too easy.
Teachers then don't know how to do it right:
That's pretty slick.
This looks good in only reels not in real life 😅😅😅
Ooooor....
...Hear me out...
You let the protective earth longer - how you learn it in school - so it's the last conjuncted contact and therefore still protecting, in case the wire is pulled and ripped apart
And in austria we call this, Pfusch vom Feinsten.
А теперь попробуйте заизолировать изолентой 😂
ciekawy pomysł a puszka te kable są za ciękie 🤣
Looks good but if don't cut the wire in the first place you won't have to splice it.
When bro falls asleep first at the party
I thought I might need it later so I liked it lol
Кабель після очистки,збільшився(видовжився)😂😂😂
My thing is . Every single wiring video is incorrect according to you TH-cam electricians
I taught myself how to do this when I became a hitch pro at Uhaul
Wires in Ohio:
The wiring is absolutely correct, if the isolation burns then there wont be q shortage as they are far away from eachother, i dont see whats wrong.
@@susmanrules should prolly use smth like a wago to avoid any shorts at all, if the cable is pulled then we can say bye bye to that house 💀
@@playmoth they are known for their shitty quality, ive had bad experiences with them, yes its simple clear the isolation on the wire and stick it in BUT DUDE IT SUCKS.
@@susmanrules i work with them in school and hasn't had any problems, I use the ones with latches and for me it's just using eye measurement and cutting then inserting and forgetting about it, didn't know they had such issues tho
Anyone else notice: they show them cut the shortest wire insulation and copper wire short, then when they rotate the animation the copper wire reappears longer than the insolation?...... great job.
Nice 👍
Great skils😊
I tried for single wire cutting ✂️ i endup by cutting complete wire always 😂.
How to easily cause a house fire
Very nice
This is For Low Voltage Splicing, Is how I do, Works Great, Quick, a No Brainer
When you fall asleep last at the sleep over and do a bit of wiring
I look at these types of videos as entertainment. New and inventive ways to cause an electrical fire. And a Darwin test for anyone dumb enough to take them seriously
Notice the longest ones magically grow copper lol
What is the point?
И они магическим образом удлиннились...
Or u could put the wires next to eachother and cut them at a descent. That way they will always be in line
that looks useful
Good ❤❤
POV: your a robot and fell asleep first:
Electric left the chat
This is called how to end up on liveleak
Ain't nobody got time for that
А спрашивается собственно: зачем?
Bu yöntemi faz/toprak/ nötr için yaptık diyelim, üç faz nötr için yani 4 tel için nasıl yapacağız?
Good information
よぅわからんけどすごいな
That's how I'm doing it to prevent shortcircuit
Wow didn't know they do that, why is it cut like that tho, any significance?
keeping the different wires away from each other prevents short circuits and fires
The copper core is growning 🎉🎉🎉
👍, good thing.
When you sleep first at the sleepover:
Everyone shitting on this has never spliced wires irl
In which software you creat this video?
I can hear the free bird song in my head
When i fall asleep 1st at a sleepover
Wow!
My friend's left and right testicle hair when he fell asleep first on the sleep over?
better earth at mid
Hook wires each other, solder and use heat shrink tubes to isolate.
You'll get jailed if you do that in where I live (same in UK and US as far I know). Only connectors (like wago or traditional ones) are allowed, and they should placed inside a junction box.
👍👍👍
Мля. Вообще инструкция по применению) Некоторые сначала отхреначат, потом думать будут как провод без изоляции прилипить.
Now my polarity is reversed and motors are running backwards and dont know why
Maine sirf therapy karwai hai.
It works, but the next guys gonna get a shock
Definitely this will not cause a fire right? RIGHT?!?!
Estupendo!
Itna time nahi hai hamare paas 😂😂😂
Not only eletrics but for eletronics too
5 minute crafts be like💀
Naaa he fell asleep first
С детство так делаю.
Buena idea
ਸਹੀ ਆ good
If Idaho was a tutorial:
How the hell do we connect both ends for earth, lighting and neutral. Different colors. Wth.
No one:
Electricians who got their degree with ChatGPT:
the yellow-green wire needs to be connected to brown wire, not like it's shown on the video
americans genuinely look at tgis and think nothings wrong
👌🏼👌🏼👌🏼
Just connect the wires my guy
Electrician tip: how NOT to splice wires
nah just take wago ez pz
This goes hard
Great
😂😂😂😂😂прикольно провод удлиняется 😂😂😂
This is Elon Musk.
or you could use a wire stripper and solder it back on 🤨
how do you join the wires?
The process of dna replication be like
No electrician does this
It is a requirement in the aerospace industry where only ‘zero error’ is allowed. 🙂
I needa get into electrical
😊😊😊😊😊😊
this shit is fire 🔥 (literally, my house is now burning)
Whats wrong then?
@@susmanrules good concept in theory. in the real thing, there's still chances that the wires are going to short themselves. really not a safe option. if u add something between the wires - thats completely different, but still not the best
@@bellini303 bro on all these vids he types that comment
Not really, it depends if they decide to actually solder it or do the stupid DIY electrical things
This would be a funny joke if this was yet another stupid electrical video, which luckily it isnt.
Assuming they cut off before soldering and shrink sealing the joints.