Daikin | error code L1 | How to fault finding.
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Brand : Daikin inverter
model : RZR50LUV1
Error code : L1
L1 is a outdoor PCb failure.There may be an underlying cause forthe failure so many also be a fan motor or compressor failure that caused the problem.
1)Reset power supply and test run .
2)check outdoor fan motor or compressor
3)if outdoor fan motor ok or compressor not running, please check the compressor incoming voltage.
• Daikin VRV3 | error co...
• How do i fix Error Cod...
• How to Replace Indoor ...
• Daikin | How to fault ...
• Daikin VRV3 | error co...
• Daikin VRV4 | error co...
#Daikin #VRV3 #VRV #VRV4 #Bon Mj
Thanks for your update video sir
Always welcome
Sir, you are doing great, It would be much much understandable when you are elaborating the issues if we could hear your voice properly, if it's possible use a microphone. Thanks for your efforts.
Thanks for your advice.
Very informative video. Thanks for subtitles. Have a great day
Thanks bro
🎉🎉🎉🎉🎉🎉🎉 good information
Thanks for watching
THANKS FOR SHARING SIR.👍
Welcome 👍
Very clear information thanks
Thanks
Thank you very much for the video.
Thanks
Thanks a lot Sir......
Hi uncle! I really like your videos because i like airconds. If can or if you have enough time right uncle maybe you can show how you fix the problems (maybe not for this scenario maybe like for a different problem you experience in the future). Anyhow i still appreciate all the knowledge that you have shared! Have a great day uncle! :DD
Thanks for watching my video and your great advice. 👍👍
@@BonMj Hahahaha it's nothing uncle. Keep up the great work! 👍🏽👍🏽
@@danialleek1038 thanks🙏
Excellent video as always 👌
Thanks
Great and informative video
Thanks
Many thanks for sharing your experiences
Welcome
thanks Sir Bon
Morning. Welcome bro.
Great video to test that board. Im going to try that on my training unit in my shop. When reading the AC voltage on the compressor does it matter which two of the three plug wires you use to test? Should you test across all three to see if similar voltage is there?
Last I want to see your technique for changing board and replacing thermal paste to heat sink. I always make a big mess.
Thanks
Me ajuda tengo ese problema donde es el problema que no hsblo inglês
Thank you for sharing boss Bon
Welcome
Good job sir
Thanks
Thank you
🙏🙏
Thanks for sharing Bon Mj.how r you?
I m good . thanks bro.
Tnxxc
Thanks
Great video my friend!
Thanks bro
Hi, bro I'm having trouble getting my daikin indoor fan problem shot cycling.
Bon sir there is little confusion in which 2 points I have to see the voltage in the U.V.W of the compressor and it is in DC volt or AC volt
AC
I have the same problem which could be A/C error detected unit 0 L1
老师,请问您刚才量的pcb to compressor 的线是电压是134 左右!是红色和蓝色?是DC 还是AC
三条都一样,AC voltage
@@BonMj 谢谢老师
👍
Thanks
How to test VRV-4 without inverter Compressor wire connect ?
Only fan working
Daikin vrv 4 series pj 12 error for change control pcb and how to identify factory pcb and spare pcb
Batter use inverter checker?
Yes
Sir overload kaise check karenge
Hello Daikin inverter error code RJ. Why?the same machine in video. Thank you
Bro. Cant find this error code
Sir my name is shravan mourya I'm from Mumbai vrv work please help to me find the arror code app neme please sir
Is there a way to contact you? Thank you
Did not understand sir. What was the problem with device?
PCB was not sending correct voltage to the compressor
I guess that the coil of compressor lie on the body of this compressor.
And why are you checking AC voltage not DC?
Sir how to BRCID52 Model remote dn code settings
What code you need
Sir inverter ki cp kaise check ✔️ kare
Was that inverter AC
Yes
Estou com esse erro em um modelo k7 36.000 btus alguém pode me ajudar erro L1
Check voltage and control pcb
@@BonMjA/C error detected unit 0 L1 help me how to solve
Daikin inverter 1.5 tr l5 error what's the complaint
Check inverter pcb and compressor
Compressor body continuety or ohm value
@@gothandaraj860 better you take out the compressor wire from terminal and on the aircon.
Measure the voltage
WHICH WIRE TO CHECK YELLOW RED OR BLUE
Both can
Sir gudevining how to trouble off AO T1 T2
What mean AO T1 T2
Not good did not show how fix this error
Where are you from sir ?
Singapore
Sir I want to work with you I am from india I have completed technical education I have 1 year of experience I want to learn VRV chiller work. May I have opportunity to work with you? Please sir reply
H6
Check compressor cable and terminal, check outdoor pcb.
U can off the power supply and waiting for 5minutes and on back.
Pag nag blog tanggalin mo face mo si maintindihan