Very clear video. I just tried shorting the two terminals with a short piece of wire and it worked. I didn't need to temporarily solder and unsolder a jumper cable - or even take the little black plastic piece out of the bottom tray of the printer. Open, twist jumper wire around two terminals, turn printer on, turn it off, remove jumper, reboot, good to go. (No soldering gun etc needed)
Great content for the channel. We need good content like this that will benefit us. Thanks and good luck my brother, and we are waiting for everything new
@@Tonercom yo lo hice y a partir de ese momento me indica que la unidad de imágenes no está instalada y no pude hacerla volver a funcionar, la saco y la vuelvo a poner y dice que no está instalada, algo le hizo a la impresora.
it;s working.... superb
Very clear video. I just tried shorting the two terminals with a short piece of wire and it worked. I didn't need to temporarily solder and unsolder a jumper cable - or even take the little black plastic piece out of the bottom tray of the printer. Open, twist jumper wire around two terminals, turn printer on, turn it off, remove jumper, reboot, good to go. (No soldering gun etc needed)
I was thinking the same thing! Just shorting the pins.
Great content for the channel. We need good content like this that will benefit us. Thanks and good luck my brother, and we are waiting for everything new
Do you have any video for Samsumg M2825nd Tonner Drum and Imagen Unit many Thanks
Alguin lo hizo? Es seguro este metodo? Gracias
Sí, mi hermano es seguro y efectivo.
@@Tonercom yo lo hice y a partir de ese momento me indica que la unidad de imágenes no está instalada y no pude hacerla volver a funcionar, la saco y la vuelvo a poner y dice que no está instalada, algo le hizo a la impresora.
@@RaulAlbertoFuentes Me ocurrió lo mismo!!!
Very good 👍
Think you
I solder a 50ohm and it burned, also i put another resistor with 100ohm same. How i can do ?
Thqnk you used ful
muy bueno
It didn't work for me...😭
It works, but you have to focus a little bit and you will succeed
Cómo restablecer el tóner
Debes comprar un nuevo chip