2013 Elantra, Passenger Rear Window Replacement

My passenger rear window busted out goin down the highway.. last time it busted was back when hurricane Ida barreled through Houma, LA where my car was parked at the heliport.
Tools needed are:
Phillips #3
Phillips #2
Torx T20
10mm socket
impact (optional)
small flathead screwdriver
Takes about a half hour to install.

[@DeepCZero3]

Here is how the glass goes in. Yes i know its a different vehicle but the principal is identical for ALL vehicles.
th-cam.com/users/shorts9lANUp676ds?feature=shared

[@rxomighty]

Didn’t see you putting the glass in smh I needed that but thanks anyways

[@danielflemmingd.c.5295]

This guy shows everything BUT actually replacing the glass. He skips that part even though he acknowledged he had difficulty with it!

[@DeepCZero3]

Well since it was just me, and i had a cell and no way to mount the camera, you didnt get to see it.

[@MatthewHanson1]

I was under the impression that you had to take the track out. Awesome you saved me a bunch of work.

[@lothianmcadam1]

Thanks for taking the time to post this. The procedure, fasteners, and tools apply identically to the passenger rear window replacement on a 2006 Azera. Ask me how I know.

[@DeepCZero3]

There is a surprising commonality to fasteners and methods between vehicles. Thanks for the comment!

[@TheRealBhino]

You literally skipped the only important part smh

[@DeepCZero3]

Which was.....?

[@haossyn4346]

​@@DeepCZero3how to put the actual window back in...

[@emman4734]

@@haossyn4346 ikr well what I gathered was you need to remove any excess glass inside the plastic holder which is why the hole with the metal lining move that down using the door so the screw is visible to loosen after removing all the excess glass then the outer bolt on the corners that he said hold the traction of the window so you must ensure that they are not removed but only loosen so you can further adjust the window

[@karleykaysinger2564]

Dude I can’t figure out how to fit the window in and if I need to remove that little black plastic triangular piece on the side of the window and how to freaking get it out

[@scarfacejan3]

Great video thanks for the info appreciate it

[@Marktheshark804]

You're doing too much, you gotta be clear concise and to the point. This is hardly helpful.

[@DeepCZero3]

Explain "doing too much"

[@kenneykatfishtenyardfight]

That's a saying meaning you're saying extra stuff thats out the way. My problem was that I wanted to see you install the window but it's all good I did get some info out of this.

[@ahmopkong]

Very helpful. Do you think 2013 and 2015 would be similar?

[@DeepCZero3]

Perhaps subtle differences, but generally the 11 - 16 Elantras are identical

[@yangqiu4483]

Hi, thanks for the video. I bought the window, but it seems I also need the grip, which is the little thing that will need to attach to the bottom of the window and connect to the regulator. Is that right? Also, how should I assemble to the grip to the window?

[@DeepCZero3]

They are usually sold with the attachment already attached, which is glued onto the glass (rear window). Front windows sit in a tray that is attached to the regulator, no glue.

[@YvonneMayfield-v1x]

You don't show the main important thing to take off the part that holds the window in place.

[@LeonardJosephJrCox]

You didn't show how the glass was replaced. Looks to me like you had someone else do it.

[@DeepCZero3]

Im a one-man show without a way to prop the phone up.

[@MonkeyTrade]

Is this for windows 10 or windows 11?

[@DeepCZero3]

Windows 9 T hate haha