I have the Enjomor V12. I had trouble getting it fine tuned because of ignition failures. What I did was milled the distributor housings a little deeper to accept the Cison L4-175 ignition sensors. I had to also widen the slot enough for the wiring harness tab to fit in such a way that allowed the circuit board to be completely flat and not make any contact with the rotor button. I used the Cison V8 ignition modules for each cylinder bank. Now, the Cison L4-175 sensor harness connector pins have to be rearranged so that the same colored wires match up. I also removed every other magnet in each rotor button and flipped the remaining magnets over. Once I finished putting it all together, I fired it off and it ran on all 12 cylinders until I saw a little steam coming from the vent tubes on the air filter base. It turns out there was an "O" ring failure in one of the cylinder liners. I've since fixed the issue (I hope), but I can't run it until the new timing cover bearings arrive. When it ran, it ran great.
I hope they will produce better parts options for the marine side of things especially for someone like me who's got one of them large fiberglass boats so they can run off the 1/4" flex shaft with a clutch
Glad to see you back Dennis, was starting to wonder if you were sick or just dad gum busy! FID racing is legit, I have bought a ton of stuff for my 1/5th scale stuff. Very nice stuff not to mention there is a very nice lady I always email for details and pricing. Think her name is Mona. The prices are higher but the quality in the product reflects that. If you want it to just work, fid! Not affiliated, just supported them buy buy quality items. Fantastic vid Dennis.
Hey man, complete off topic question, but you're the only guy i know who probably can answer this question. Im searching for a nitro fuel mixture of 20 to 25%, but i cant find any everyone seems to sell 16% or lower. Can i run my toyan fs-l200 on a fuel mixture with only 16% nitro in there??
Hey Dennis. It's Matt. I've never left a comment but i've watched all your videos. MY grandpa got me started on balsa planes and tissue paper. I then moved on to rc cars and some free flight cox helicopters. lost a few of them. Anyhow, I really appreciate that you take the time to make entertainment and teaching so that every man can have his favorite smoke, beverage, and popcorn at the end of the day. I got interested in your videos when I saw the HGP knock off tamiya 3 speed and i bought the kit off some bs chinese website and i built it and forward mounted the servo and modified the trans. i love it. it really likes the 42 turn 2s. Its absolutely beautiful with the hand taped paintjob. ill make a video of it
Hi Matt! Sorry for the delay in returning your message sometimes there isnt enough time in a week to respond but you have been on my mind to get back to you, so this morning before anything side tracked me I am hitting you up, I was so happy to hear that you are from a family of Rc its a life style and we should be proud of our ideas, I love the hg-p407 and I have done many conversions to those trucks, Keep on building my friend!
FID isnt a new company, they’ve been around for quite a few years, i have the fid dragon hammer, its a 1/5 scale gas powered 4x4 ultra4 style buggy with ifs and a solid rear axle
*Hi Dennis, I had no idea you're also into body repair, cool to see we share the same interests!*
I have the Enjomor V12. I had trouble getting it fine tuned because of ignition failures. What I did was milled the distributor housings a little deeper to accept the Cison L4-175 ignition sensors. I had to also widen the slot enough for the wiring harness tab to fit in such a way that allowed the circuit board to be completely flat and not make any contact with the rotor button. I used the Cison V8 ignition modules for each cylinder bank. Now, the Cison L4-175 sensor harness connector pins have to be rearranged so that the same colored wires match up. I also removed every other magnet in each rotor button and flipped the remaining magnets over. Once I finished putting it all together, I fired it off and it ran on all 12 cylinders until I saw a little steam coming from the vent tubes on the air filter base. It turns out there was an "O" ring failure in one of the cylinder liners. I've since fixed the issue (I hope), but I can't run it until the new timing cover bearings arrive. When it ran, it ran great.
Take care boss.
That's a cool radiator. It looks like it's quite large, though. I believe it's going to be 6 1/2" x 10" wide, plus the added height of the fill cap.
I hope they will produce better parts options for the marine side of things especially for someone like me who's got one of them large fiberglass boats so they can run off the 1/4" flex shaft with a clutch
I'm wanting to do something that know one I know of has done before and sick one of them v8s in my boat which based on the actual Fountain Lighting
So much awesome stuff coming brother!
do you have a link for the display radiator you were testing that you got off ebay? thank you.
Those V12s are awesome. Love watching you show us these.
Glad to see you back Dennis, was starting to wonder if you were sick or just dad gum busy! FID racing is legit, I have bought a ton of stuff for my 1/5th scale stuff. Very nice stuff not to mention there is a very nice lady I always email for details and pricing. Think her name is Mona. The prices are higher but the quality in the product reflects that. If you want it to just work, fid! Not affiliated, just supported them buy buy quality items. Fantastic vid Dennis.
Can't wait to do the collab video on the radiator
Hello Dennis, very good information, be prepared for the new Toyan V8
Nice so what is the best v-8 out on market now to purchase? Maybe one day I’ll buy one, but this stuff is expensive
Double Deuce bringing the info 👍 . Make sure you go visit your mother buddy .
Stay tuned for a new v8 coming out this year 😎 and no it's not a Toyan
Hey man, complete off topic question, but you're the only guy i know who probably can answer this question. Im searching for a nitro fuel mixture of 20 to 25%, but i cant find any everyone seems to sell 16% or lower. Can i run my toyan fs-l200 on a fuel mixture with only 16% nitro in there??
good video, thanks
Hey Dennis. It's Matt. I've never left a comment but i've watched all your videos. MY grandpa got me started on balsa planes and tissue paper. I then moved on to rc cars and some free flight cox helicopters. lost a few of them. Anyhow, I really appreciate that you take the time to make entertainment and teaching so that every man can have his favorite smoke, beverage, and popcorn at the end of the day. I got interested in your videos when I saw the HGP knock off tamiya 3 speed and i bought the kit off some bs chinese website and i built it and forward mounted the servo and modified the trans. i love it. it really likes the 42 turn 2s. Its absolutely beautiful with the hand taped paintjob. ill make a video of it
Hi Matt! Sorry for the delay in returning your message sometimes there isnt enough time in a week to respond but you have been on my mind to get back to you, so this morning before anything side tracked me I am hitting you up, I was so happy to hear that you are from a family of Rc its a life style and we should be proud of our ideas, I love the hg-p407 and I have done many conversions to those trucks, Keep on building my friend!
I have a question can 1 /10 10x10. Used on a 1/8 RC
Thanks for sharing Dennis, Wow there is some really cool stuff hitting the market! just awesome 😎
Hi Dad, please go and see mum.
Love the down load. Can't wait for next one, and more on new V8. Take care
FID isnt a new company, they’ve been around for quite a few years, i have the fid dragon hammer, its a 1/5 scale gas powered 4x4 ultra4 style buggy with ifs and a solid rear axle
Yes it is an older company but Rhett from Chuan Qi is onboard now