Dear Mike, Thank you for just selling me stuff in your video vs having ad's that I have to suffer through. Like button hit every time for that pro call.
The addition of the wireless mic.'s are a godsend to your productrion. I can actually understand everyone and everything you are putting forth. An investment you will not regret. It's already paying dividends.
Newbern is one of those ' Ride or die' type of friends, who we'd all love to have.. Dude is 100%, down for anything wrenching/fabrication.. This Beers for you, Newbern🍺🍺🍻🍻.. Cotten, and everyone else did a hell of a job too.. Beers all around..🍻🍻
If Finnegan ever has a Garage Sale im buying thw whole garage...as is...with everything in it. Too bad its got that pesky house on top. Would make for good storage. In all honesty Mike i absolutely LOVE your entire setup. You've done just about as awesome of a job as humanly possible.
Man, I cant beleive it! You're getting it running for us??? That's perfect, cuz I gotta help my freind move next weekend! Thanks in advance and drop it off at my shop in Santa ana when you get done with the alignment! You guys rock!
I hope you guys are actually as good of friends off camera as you appear to be on camera. It definitely makes this kind of thing more meaningful to see.
Hi Mike & Co: love ALL the videos and watch them daily whilst convalescing with an infected leg. Here in London, UK I have a 68 Camaro with a 565 / 945HP (NA) built by Steve Schmidt which I can't wait to install with built T400 and Quick Performance 9" - then go drag racing once Covid's over and the weather improves. I also have a 1981 square body C10 longbed with a straight six and 3 on- the-tree, soon to be replaced by a rebuilt T400 and the 396 ex-Camaro (after rebuild). I've been a Hot Rod/ Car Craft, etc reader since the sixties and love Roadkill, Freiburger and all your colleagues. Finally a tech tip: when drilling a hole through sheet metal, etc - it sometimes helps to stick duct tape over the area to be drilled and this stops the drill wandering - but maybe you know this already? Keep up the great videos!! Roger Bannister
I got my Youngest Brother a T that said "I Void Warranties" a few years ago there was a Ecotech V6 involved in a truck that has less than 50,--- miles. I have never had a vehicle under warranty that I damaged the motor on, baby bro that did so he got to wear the Tshirt. "Yall can Go to Mars, I shall Stay in Texas" Casey V from Gypsy WagonMS shall be qoted on that
It's nice to get back to the C10 build. I know Mike worked hard on the Cadillac build but I didn't watch 95% of it simply because I couldn't bear to watch him cut up that really nice rare car.
Absolutely love your videos, I am an aircraft electrician, and an amateur when it comes to cars and motorcycle, but I work on my on vehicles and I learn alot from yall
Where’s your welding gloves young man,,, love you guys.... you’ll make it.......I hope. You know it always comes down to the last hour. Wishing you luck.
Hex nut zerts are certainly the best trimming out between sheetmetal panels. Old doors/speakers. Rear package tray etc. keep up the good work love the editing and sound can only hope to achieve one day
Mike good job on the C10! It’s been cool to watch it come together! For the record, I liked the old intro logo with the flames and glass break effect better.
You can adjust the spring tension in that hole cutter by turning the screw in the back of the arbor. It will keep it from walking. I learned the same way.
Trick to the rotocuts are pre drill an 1/8” hole before using the rotocut. The arbor is exactly 1/8” so it will hold the bit centered and not walk. I use them almost everyday at work 💪🏼
We all need on Facebook when you think you may arrive Sunday . I want to come see the truck and meet you in person . What a gigantic effort you guys have put forth to make this happen. I hope the truck comes out awesome for you and the guys . There has been alot of top notch work done here .
I’d love to see finnegan build a no prep or street race car and, compete in no prep kings or on street outlaws. I think he’s got the skills and the money to be very competitive!!
I have become addicted to the nutsert! I am replacing self-tappers all over my car and any new fittings now start life with the appropriate nutsert! Bonus is the stainless steel means less longterm issues with corrosion!
At the 0.14 second mark there is a flash on screen where it says "Analyzing in Background" it also happens at two other point earlier in the intro. Sweet video regardless and crazy amount of progress done.
I always felt the 67 was the finest looking PU ever made. I love that you get to take it to such a high level. You have some great friends there as you know!
Dave, Annular cutters won't walk out of the hole if you pilot drill them 1/8". You won't get the spring ejected slug but you also won't get the spirograph artwork.
Thats why thoses two white board are there...to get drawn back in front of the build...in ahhhww...kick back n look what is done..can't wait till its kodack time
Always great vids finn .and the music taste is in my era love it and deff can't wait to see this build run and perform finn .I have a 1968 ford LTD 2door hide away headlights I want to redo it's got a 400Mbigblock in it and it would be so hot all decked and tinted out but till next vid godbless and stay safe.
I don't know the dude irl but just seeing Cotton walk into shot makes me smile and wonder what mayhem will ensue. He seems to be a damn good guy.
He’s a character!
I like all of these guys. All are decent, motortrend team too.
@@wadebrewer7212 you're right, they all are people I would love to meet and hang out with.
Dear Mike,
Thank you for just selling me stuff in your video vs having ad's that I have to suffer through. Like button hit every time for that pro call.
Excellent progress. Way to go, Cotten.
Light at the Big End of the Tunnel........ Y'all are sneakin" up on it.💪🏼💪🏼🔥🔥🔥🔥🇺🇸🇺🇸🇺🇸
The addition of the wireless mic.'s are a godsend to your productrion. I can actually understand everyone and everything you are putting forth. An investment you will not regret. It's already paying dividends.
Newbern is one of those ' Ride or die' type of friends, who we'd all love to have.. Dude is 100%, down for anything wrenching/fabrication..
This Beers for you, Newbern🍺🍺🍻🍻..
Cotten, and everyone else did a hell of a job too.. Beers all around..🍻🍻
If Finnegan ever has a Garage Sale im buying thw whole garage...as is...with everything in it. Too bad its got that pesky house on top. Would make for good storage.
In all honesty Mike i absolutely LOVE your entire setup. You've done just about as awesome of a job as humanly possible.
Man, I cant beleive it! You're getting it running for us??? That's perfect, cuz I gotta help my freind move next weekend! Thanks in advance and drop it off at my shop in Santa ana when you get done with the alignment! You guys rock!
I hope you guys are actually as good of friends off camera as you appear to be on camera. It definitely makes this kind of thing more meaningful to see.
Listen to alot of stuff from Finnegan over yrs..💪♥️🤟
THIS IS A TALL BUILD FOR THE TIME FRAME BUT I ALWAYS ENJOY YOUR VIDEOS .... I"M SURE YOU"LL MAKE YOUR DEADLINE.. LOT OF TALENT IN YOUR SHOP...
Love you guys!! Keep the automotive hobby alive!!
Y’all are fancy with your digital angle finders and your transfer point, I always just use a level and a nail.
The oll eyeball has always been pretty accrate
you are fancy! I use guesswork and a stick.
@@deserteagles948 your left one or your right one? Lol jk.
@@krusher74 I guess so lol.
Hi Mike & Co: love ALL the videos and watch them daily whilst convalescing with an infected leg. Here in London, UK I have a 68 Camaro with a 565 / 945HP (NA) built by Steve Schmidt which I can't wait to install with built T400 and Quick Performance 9" - then go drag racing once Covid's over and the weather improves. I also have a 1981 square body C10 longbed with a straight six and 3 on- the-tree, soon to be replaced by a rebuilt T400 and the 396 ex-Camaro (after rebuild). I've been a Hot Rod/ Car Craft, etc reader since the sixties and love Roadkill, Freiburger and all your colleagues. Finally a tech tip: when drilling a hole through sheet metal, etc - it sometimes helps to stick duct tape over the area to be drilled and this stops the drill wandering - but maybe you know this already? Keep up the great videos!! Roger Bannister
Love the new Neon Finnegans LOGO. Cudos for all getting this recorded, edited and posted
I got my Youngest Brother a T that said "I Void Warranties" a few years ago there was a Ecotech V6 involved in a truck that has less than 50,--- miles. I have never had a vehicle under warranty that I damaged the motor on, baby bro that did so he got to wear the Tshirt. "Yall can Go to Mars, I shall Stay in Texas" Casey V from Gypsy WagonMS shall be qoted on that
It's nice to get back to the C10 build. I know Mike worked hard on the Cadillac build but I didn't watch 95% of it simply because I couldn't bear to watch him cut up that really nice rare car.
I really like that you are completing this build rather than let it drag on for years. Its almost like a Discovery series but without the dumb stunts.
Love Faster with Finnegan and Finnegan’s Garage. Much better than the new Top Gear America.
I'm not really a mini truck guy, but I gotta say, I'm really enjoying this build. I can't wait to see more on the Cadillac tho
My favorite build!! I have loved this truck since the sport truck mag days.
The voice activated tig pedal at the end is awesome! :D
loving the build guys ,great team spinning wrenchs it looks like, new editing and entro super !YOUR HIRED!! GOOD LUCK Mike and guys stay safe.
"Cousin Eddy approves" 😂😂😂
That truck is going to be Awesome!!!
Been loving this series! The pace and production quality is on another level!
Yes on the production quality is on point. We'll done and keep it up for sure!
Absolutely love your videos, I am an aircraft electrician, and an amateur when it comes to cars and motorcycle, but I work on my on vehicles and I learn alot from yall
That look on Coten's (forgive me if I misspelled) face after "whining" about the brake fluid reservoir location....PRICELESS!!!
Great job guys.
The truck is awesome and it's coming together really really nice, I waited along time to see this epic truck done n sitting aired out on the ground.
Love this. If you talented guys can do this in a week anything is possible.
Where’s your welding gloves young man,,, love you guys.... you’ll make it.......I hope. You know it always comes down to the last hour. Wishing you luck.
Bad ass build all the luck to get it done on time !!! You all are killing it
Great editing guys.
This is my favorite project so far. I have been following this build for years. I can hardly believe we are finally going for a ride!
White board says... built for sema but runs and drives... maybe... love the build you guys are amazing!
Hex nut zerts are certainly the best trimming out between sheetmetal panels. Old doors/speakers. Rear package tray etc. keep up the good work love the editing and sound can only hope to achieve one day
Finnegan *spends the week overnighting parts*
also Finnegan “hope the wife isn’t buying shoes” 😂😂😂😂 she is and she is getting them overnighted
hey if finnegans wife puts up with his car/truck buying habits and shenanigans, than i think she should be allowed some things. lol
@@partymstr4 This is also his job though
Amazing how quickly it comes together when you stop procrastinating and have a deadline lol.
Mike good job on the C10! It’s been cool to watch it come together! For the record, I liked the old intro logo with the flames and glass break effect better.
I would like to see some in-depth video after the build done. Would really like to see more about the hard line, tips and tricks.
Loving this build.
You can adjust the spring tension in that hole cutter by turning the screw in the back of the arbor. It will keep it from walking. I learned the same way.
Everyone looks and sounds exhausted...But I can see the light at the end of the tunnel...
Keep it up kids!!! 👍👌🤘💪
Very cool seeing the truck come together.. Your truck is crazy bad ass...
What a Hoot it would be to watch this live, Fun Stuff.
Trick to the rotocuts are pre drill an 1/8” hole before using the rotocut. The arbor is exactly 1/8” so it will hold the bit centered and not walk. I use them almost everyday at work 💪🏼
Living the build series! You boys are hard at it. Keep it up!
Loving this build series. Hope you can do more builds similar to this in the future
We all need on Facebook when you think you may arrive Sunday . I want to come see the truck and meet you in person . What a gigantic effort you guys have put forth to make this happen. I hope the truck comes out awesome for you and the guys . There has been alot of top notch work done here .
33 dislikes? why would any person following Mike dislike this video? Hell yea !! Awesome stuff here guys!! Keep it coming!!
Super video! I applauded for $2.00 👏
Excellent
9:09 Finnegan's thumb lives to see another day!
I have positively loved every video of this week long C10 build!! Seeing the build come together step by step !
YOUR FRIENDS ARE THE BEST MIKEY
You guys are killing it!
Going to be the cleanest and meanness c10 on this planet just saying love all these videos and this channel
I’d love to see finnegan build a no prep or street race car and, compete in no prep kings or on street outlaws. I think he’s got the skills and the money to be very competitive!!
Great team , misfits and smart people. These video’s have been great, all the work being done in garage and not a shop. Thanks for sharing. Kevin
I have become addicted to the nutsert! I am replacing self-tappers all over my car and any new fittings now start life with the appropriate nutsert! Bonus is the stainless steel means less longterm issues with corrosion!
Thank you Wire Care--we need more of this type of videos
Looks awesome, cant wait to see it done!!! Bring that thing to Mininats in Maggie Valley!!
At the 0.14 second mark there is a flash on screen where it says "Analyzing in Background" it also happens at two other point earlier in the intro. Sweet video regardless and crazy amount of progress done.
Hello Finnegan and the gang awesome work but I found 2 things for the list start engine and do a awesome burnout and destroy rear tires 😀😎
I always felt the 67 was the finest looking PU ever made. I love that you get to take it to such a high level. You have some great friends there as you know!
I thought it was easy build buddies. All love. Finn and his bad ass surburbaites crew
I would pay a subscription to watch 12V Dave and Cotton go at it all day
The enormity of your achievements thus far this week has been AMAZING. Well done to all of you in the team.
Editing and music is pretty killer. Cool build guys!
You guys look like you're having a blast even though it's alot of hard work awesome job thanks for the content!
Dave, Annular cutters won't walk out of the hole if you pilot drill them 1/8". You won't get the spring ejected slug but you also won't get the spirograph artwork.
Holy cow! Get it done and get it painted.
Super cool to watch stuff like this. Nice work folks 👍
Goog luck! get it DONE, i want to see a success.
Fun to see i'm not the only one who sometimes adds stuff to the todo list, just so that i can cross it off because it's done.
Excited to see this truck running and driving. Hands down this is an amazing build
Y'all are killin it!!
What an awesome journey to come along! Great series; can‘t wait to see it running! Team FSM rules!!!
Loving the c10 build
So awesome to watch. Funny to see the exhaustion in everyone's faces.
This format is awesome. More builds like this, please
Truck looking awesome great team effort.
I’ll tell ya what, you guys really know your 5h17!
Impressive would be an understatement!
Thats why thoses two white board are there...to get drawn back in front of the build...in ahhhww...kick back n look what is done..can't wait till its kodack time
Best “show” this week. Can’t wait to see it on the ground.
it takes me the week to change the engine in a 2010 Lincoln MKZ y'all guys knock out more than I have to do...... in a day amazing work
Really digging this series, been following the complete truck build.
Most inspiring build on the tube right now
Cool I'm bing wachting as got to many TH-cam channel's and I've been busy doing things myself 👍🏾👍🏻
Killing it boys.
Always great vids finn .and the music taste is in my era love it and deff can't wait to see this build run and perform finn .I have a 1968 ford LTD 2door hide away headlights I want to redo it's got a 400Mbigblock in it and it would be so hot all decked and tinted out but till next vid godbless and stay safe.
Yaaayyy! Finnegan finally got a mic! So much better
Awesome C10 build.
"analyzing in background" 0:12
Beat me to it. lol It took me a few tries to stop it there.
Premiere Pro. Sometimes it's quirky.
Happens at 39 too
@@NeverLetOff I saw it a few times. I think it was at 14s too.
happens 3 times
Really enjoying this build
I freaken LOVE this truck
This project really went pretty deep from the beginning.
Great, great run of episodes. Your new editor is working out well, big improvement in audio, awesome. Keep up the great content and thanks!
I just saw what 12vDave and Finnegan were saying about the "ducting" in the last video! 😆Looking great guys!
perfect timing !
WE ALL
LOVE COTTON AND DAVE !! 🥸😜😎
Can’t wait to finely hear this pile
Nicely designed!!!!
Awesome vid again. Can't wait to see you drive it up the highway into the sun set.