Indian Scout Bobber Arnott Air Ride Review

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ธ.ค. 2024

ความคิดเห็น •

  • @israelgastelumtrujillo9948
    @israelgastelumtrujillo9948 10 วันที่ผ่านมา

    Nice I never seen another ISB with air suspension, they look very nice. In my case I bought a dyna dirtyair shocks is pretty much the same also include a 3'' airtank so I can quickly rise the suspension, I put it inside the ends cuoio swingarm bag.

    • @motomoj
      @motomoj  7 วันที่ผ่านมา

      That's a good idea. I went with the kit to save some of time fitting it.

  • @MrPoliarinis
    @MrPoliarinis ปีที่แล้ว +2

    They cost similar to fox.. so it seems that arnott is the best option pricewise

    • @motomoj
      @motomoj  ปีที่แล้ว +2

      I think the adjustability on the fly is a priceless feature.

  • @Jiggy_Jayy
    @Jiggy_Jayy ปีที่แล้ว +1

    did you put a wind shield on the scout bobber or is the scout rogue? sweet bike

    • @motomoj
      @motomoj  ปีที่แล้ว +1

      This is a windscreen on a bobber. The rogue comes with a different fairing. The Rogue has a headlight surround with a windscreen built in.

  • @RobPollard-q1i
    @RobPollard-q1i ปีที่แล้ว +1

    I am considering these shocks. They only have 1.88 inches of travel, how does that work with so little movement??

    • @motomoj
      @motomoj  ปีที่แล้ว

      The bags provide a much better cushion than stock. I have not owned other shocks so I am unsure of how the compare to other alternatives. I have a bad lower back due to an injury, and for me it completely negates that back pain when riding. I also like the adjustability when riding solo vs with a passenger.

  • @StreetPilots
    @StreetPilots ปีที่แล้ว +1

    Hey, so I’m literally a couple days away from doing this set up, I’m doing more for aesthetics. How low does it squat?

    • @motomoj
      @motomoj  ปีที่แล้ว +2

      On my Instagram I have a post comparing from all sides the night difference. But it’s 3-4 inches I would say.

    • @StreetPilots
      @StreetPilots ปีที่แล้ว +1

      @@motomoj just saw it, yeah I’ve been holding off because after 2020 they don’t support Bobbers. I have to make a custom bracket for the compressor and I wanted to see how it will look. My bike is heavily modded and I’m trying to visualize if this is worth over my Ohlins

    • @motomoj
      @motomoj  ปีที่แล้ว +2

      Hmm I wonder what’s different about them. I might contact them and ask. Their supper was super helpful and responsive. The Ohlins will be more sporty

  • @jimjam13
    @jimjam13 ปีที่แล้ว +1

    That a custom built exhaust or is it a kit from somewhere?

    • @mikeevans1281
      @mikeevans1281 ปีที่แล้ว +1

      It’s custom built from Barlow built

    • @motomoj
      @motomoj  ปีที่แล้ว +1

      Thank you mikeevans1281. Yes this is a custom one off built exhaust by Luke Barlow.

  • @raybrensike42
    @raybrensike42 ปีที่แล้ว

    So does the kit also come with tire inflation capability?

    • @motomoj
      @motomoj  ปีที่แล้ว

      It does not.

  • @raybrensike42
    @raybrensike42 ปีที่แล้ว

    If you get an inch and a half to two inches of travel and when you sit on it you loose an inch what does that leave one with?

    • @motomoj
      @motomoj  ปีที่แล้ว

      Not sure what you are asking, when measuring at the highest position compared to stock without sitting on it, i gained 2 inches of height.