Of all the YT channels that have been recommended to me...your setups are closest. Even though you run a wheel, I only have to tweak 'em a little. I appreciate your effort and thank you for making me faster as I am not an engineer. To quote Cole Trickle,"They told me I could drive, so I just drive"
Thank you! That is exactly what this channel is meant to do, provide a good base setup for a wide variety of drivers, that they can tweak to fit their driving style. Thanks for watching my videos and supporting the channel!
I just ran a 19.86 with this setup. I found a neat trick you can do. Down shift to 3rd gear going into the corner and when coming off upshift. If helps entrance and exit huge. Without shifting I did get a 20.098. But yeah nice setup definitely helpful
I actually used your Dover set up, tweaked your gearing, and changed wedge and front weight. I run slower at low 21s but I don't need to brake if you roll the corners
How would you recommend tweaking your setups for someone that runs with a controller and at the end of a green flag run with tire fall off has to fight spinning out? Best to tweak settings or simply feather till a pit?
good set up, i hit a 20.076 and when i get my brake deadzone and sensitivity dialed in will probably get it faster,i usually end up tweaking set ups some but don't think so with this one is pretty dang fast
I’m having a really hard time getting it to turn on entry. I’m losing a spot every corner after a restart because I have to back it up so much just to make the corner.
lift slightly on entry than cut the wheel left hard, tap break(completelyoff gas at this point) & than drop the hammer & while rotating the wheel back to the right just expect to be walking a tight rope with her wanting to get loose, its an aggressive style of entry but if can perfect it you turn all that looseness into crazy acceleration
I started doing Preset/Slider setups a couple of months ago. I haven't got them for all tracks or all series, but you can go to my webpage and check out all my videos. Here are links to the preset videos that I have done so far. setup-man.com/cup-preset-setups setup-man.com/xfinity-preset-setups-1
@@longfirewolfchannel1956 Thank you for pointing that out! Members get to early access to videos, but this video has been out for a while, so it should be available to everyone. I just changed the permissions, so you should be able to see it now. Sorry for the trouble, but thanks for pointing this out!
World class!!!! Literally checked the difficulty to make sure it was still legendary and the assists were all off, it drove that well, thank you!!!
Of all the YT channels that have been recommended to me...your setups are closest. Even though you run a wheel, I only have to tweak 'em a little. I appreciate your effort and thank you for making me faster as I am not an engineer. To quote Cole Trickle,"They told me I could drive, so I just drive"
Thank you! That is exactly what this channel is meant to do, provide a good base setup for a wide variety of drivers, that they can tweak to fit their driving style. Thanks for watching my videos and supporting the channel!
Ran a 20.2 on 21 lap old tires, another good setup man!
I just ran a 19.86 with this setup. I found a neat trick you can do. Down shift to 3rd gear going into the corner and when coming off upshift. If helps entrance and exit huge. Without shifting I did get a 20.098. But yeah nice setup definitely helpful
How do u downshift
I actually used your Dover set up, tweaked your gearing, and changed wedge and front weight. I run slower at low 21s but I don't need to brake if you roll the corners
Awesome setup. Best I could get was 20.6. Just popped off a 20.211. Thank you
Awesome! Glad you like it! Thanks for watching!
Your the man. Your setups are great
Excellent setup
Ran a 20.1 this a dominant career mode setup
20.642 with a controller was my best so far.
Trail breaking is crucial
How would you recommend tweaking your setups for someone that runs with a controller and at the end of a green flag run with tire fall off has to fight spinning out? Best to tweak settings or simply feather till a pit?
I ran a 20.75, which I'm okay with.
Man this setup is bad fast. I was able to run consistent 20.0 lap times with it
good set up, i hit a 20.076 and when i get my brake deadzone and sensitivity dialed in will probably get it faster,i usually end up tweaking set ups some but don't think so with this one is pretty dang fast
For some reason, I seem to do my best work on some of the smaller tracks! Martinsville, Richmond, Iowa and Phoenix are some of my best setups!
@@theset-upman3500 it did get a little squirrely towards the latter part of the run on 50% but manageable
what slider would you recomment
20.443 from 21+ thank you
Gotta get a Talladega I use your Daytona
I’m having a really hard time getting it to turn on entry. I’m losing a spot every corner after a restart because I have to back it up so much just to make the corner.
lift slightly on entry than cut the wheel left hard, tap break(completelyoff gas at this point) & than drop the hammer & while rotating the wheel back to the right just expect to be walking a tight rope with her wanting to get loose, its an aggressive style of entry but if can perfect it you turn all that looseness into crazy acceleration
Does anybody know a TH-camr that doesn't do custom setups because the race League I am in for NASCAR heat 5 we cannot use custom setups
I started doing Preset/Slider setups a couple of months ago. I haven't got them for all tracks or all series, but you can go to my webpage and check out all my videos. Here are links to the preset videos that I have done so far. setup-man.com/cup-preset-setups setup-man.com/xfinity-preset-setups-1
@@theset-upman3500 will the one I'm looking at is for Bristol but I can't watch the video because it's for Members Only
@@longfirewolfchannel1956 Thank you for pointing that out! Members get to early access to videos, but this video has been out for a while, so it should be available to everyone. I just changed the permissions, so you should be able to see it now. Sorry for the trouble, but thanks for pointing this out!
Put the wedge down to 50.0 I ran a 20.124
I just ran a 22.6
Flick it into 3 scream off
i absolutely hate martinsville in trucks