Surprisingly, 90% of video viewers haven't subscribed yet! If you enjoy my content, please consider subscribing and leaving a comment. Your engagement boosts the video's visibility. Thank you for your valuable support!
@@HAZITECH fine but can I make first mode of the light shown in video without microcontroller and how ? Suggest me a video link of your channel or othe channel please 🙏🙏
Hello and let me start by saying thank you. I have searched all over trying to find a circuit like yours which would auto change the flash pattern. I know nothing about Arduino and have never tried it, until now. Thanks to you I have now purchased several Arduino boards as well as the ATtiny85 in hopes of making your build. Thank you so much for sharing your information it is exactly what I was looking for.
Wow awesome to hear that. If you need custom work done with LED stuff, let us know. We have plug and play controller boards and do custom coding as well. Contact us at info.hazitech@gmail.com
Would you be kind enough to do me a favor? I would really appreciate it if you could visit my Facebook page through the provided link, follow it and leave a review. To do so, simply click on the ⭐️ ’Star’ button. Thank you very much for your help! facebook.com/HAZI.TECH
If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!
Hi HAZITCH, You are doing really amazing job. We did Die-Cast Upgrade for Landcruiser LC200 & Audi A7 Police Strobe Lights using your Tutorial. Thanks a Lot & do new Die Cast light upgrades. I will definitely upgrade my die-casts
Should be possible as this uses very little memory. You may need to change the pin numbers that’s it. Just compile the code for Attiny13 and see whether it works.
very cool project buddy, thanks for sharing. I had a question, the max current for each IO pin on the attiny85 is stated as 40 ma which is sufficient for 2 led's , but you stated that if we need more led's per channel we can increase but wont the power per led get lower and thereby the brightness.
Hey thanks a lot. You can safely use up to 4 3mm LEDs per channel. It wouldn't draw much power as those are not continually on with maximum brightness.
If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!
@@HAZITECH Arduino: 1.8.16 (Windows 7), Плата:"Digispark (Default - 16.5mhz)" RC_Police_Light_Push_Button:6:20: fatal error: EEPROM.h: No such file or directory #include ^ compilation terminated. exit status 1 EEPROM.h: No such file or directory вот такую ошибку выдаёт.
@HAZI TECH Can this work if powered by rechargeable 3.7v 2300mAh 8.6Wh battery? 👏🏼🥳Thank you much for all your videos!!!..Your effort is much appreciated. 👍🏼👍🏼I am subscriber now. 💯
Now you can buy plug and play "HAZI TECH TINY Pixel LED Controller". More details here 👉🏻 th-cam.com/play/PL4dsTE_604gv_zHUUKsRXbz0E_pfTAr9S.html
Are you from Sri Lanka?
Yes I am
Wow amazing 😍
Thanks ☺️
Just what I've been looking for cheers man, great vid 👍
Thanks a lot bro. Don’t forget to Subscribe, like and share.
Surprisingly, 90% of video viewers haven't subscribed yet! If you enjoy my content, please consider subscribing and leaving a comment. Your engagement boosts the video's visibility. Thank you for your valuable support!
How to make this police light without coding because I have not aurdino or any other module to code and also i have not pc or laptop 😞 please reply
Sorry, it’s almost impossible to do all these designs without using a microcontroller.
@@HAZITECH fine but can I make first mode of the light shown in video without microcontroller and how ? Suggest me a video link of your channel or othe channel please 🙏🙏
that is yet again perfectly implemented 👍🏼 Keep it up 😁
Thanks Matze 😊
thanks a lot ! the best one i never seen !
Thank you so much ☺️
Hello and let me start by saying thank you. I have searched all over trying to find a circuit like yours which would auto change the flash pattern. I know nothing about Arduino and have never tried it, until now. Thanks to you I have now purchased several Arduino boards as well as the ATtiny85 in hopes of making your build. Thank you so much for sharing your information it is exactly what I was looking for.
Wow awesome to hear that. If you need custom work done with LED stuff, let us know. We have plug and play controller boards and do custom coding as well. Contact us at info.hazitech@gmail.com
Would you be kind enough to do me a favor? I would really appreciate it if you could visit my Facebook page through the provided link, follow it and leave a review. To do so, simply click on the ⭐️ ’Star’ button. Thank you very much for your help!
facebook.com/HAZI.TECH
Nice project.
Thank you!
ඔයාගේ අයියේ වැඩනම් සුපිරි ආයේ කියන්න දෙයක් නෑ 😊😊
ගොඩක් ස්තුතියි මල්ලී ☺️
අර මේ ච්ප් එකක් තියෙන ආඩිනෝ බෝඩ් එකකිනුත් ඔය විදියට හදන්න පුළුවන් නේද
පෝන් එකෙනුත් ඔය විදියට ප්රෝග්රෑම් කරන්න පුලුවන් නේද
Brother can you give me the copy of this adino programe, i don't know to write programe to this light
Please
It is linked in the video description bro
Can you reply that link again to this chat, I can't find the correct video properly?
What is the code brother, I can't find it
Hello! Why do you use the eeprom to store the numb var first?
Isnt it better without writing the eeprom to save lifetime?
Thx or your answer.
It is to keep the selected pattern in the memory even after powering off the system.
Very cool!
Thank you so much
what if the board used is Wemos d1 mini. Is writing a different sketch??
Sorry I haven't used it.
I have 4, 12 v led strob lights. Is there a way to use these patterns to them like in this video with 12v
No it does not work with this.
Very Good And Great Project 👍👍👍
Thanks 😊
If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!
Dear, meke push button ek natuwa auto pattern tika maru wennna hdnna barida
Meke Pattern 9 kiyanne auto eka thama.
Hi HAZITCH,
You are doing really amazing job. We did Die-Cast Upgrade for Landcruiser LC200 & Audi A7 Police Strobe Lights using your Tutorial. Thanks a Lot & do new Die Cast light upgrades. I will definitely upgrade my die-casts
Wow awesome. I’m so glad that I helped you.
Nice project
Thanks a lot
Question: could you program something like this with a "LED strip" instead of LEDs 🤔❓with different numbers of SMDs ❓?
Hey Matze, NO you cannot use LED strips. But you could use 1-3 LEDs per channel.
Can you make it with 12v leds operating with 12v battery??? Please reply
Sorry not this one. It requires both hardware and software update.
i have make this same way. but led gnd all should join together light will glow up...if i follow led polarity in circuit does not work...
Please double check your wiring and code. It should work as it is.
Hey bro can I use a attiny13a ic
I don't think so as it has a limited memory. You can try compiling the code for that.
can the project be done with attiny13 do you want to change the code
Should be possible as this uses very little memory. You may need to change the pin numbers that’s it. Just compile the code for Attiny13 and see whether it works.
Thank you for this. I really appreciate it. Please make another tutorial for ATtiny85 and IR sensors :)
Thanks. I will do so 👍🏻
@@HAZITECH thank you..
@@HAZITECH I have a question. can we also do this in a 4-pin LED? the RGB LED? thank you!
You are welcome
Sorry the data pins won’t be sufficient
Nice project
Thanks
You are awesome my friend!!
Thank you so much
Without code it work or not ?
And how to make it without arduino
It won’t work without the code. And I only do Arduino projects. Sorry
Very good 👍👌
Thanks
How would I flash this sketch to an ESP32? Can it be done directly or do you have a sketch like this for an ESP32 please. Thanks in advance
Hi. You may need to change the pin numbers in the sketch for ESP32 based on your wiring. That’s it.
More ATtiny85 Projects and guides are here
th-cam.com/play/PL4dsTE_604gtS10OXtAWo1Wzn2JVjEjaF.html
How can i oder this kit
Send an email to info.hazitech@gmail.com
👎👎👎👎👎💡💡💡👎👎🎥
Niyamai aiye,thawa thawa aluth item hadanna puluwan wewa kiyala man parthana krawa 😘
Bohoma sthuthi malli
@@HAZITECH aiye aluth etim ekak lagadima ona,danakan balan enno
Ok malli dennam dennam
Very Nice Project 👌👌
What is the maximum voltage it can take,
Can we power it up from 18650 battery, which is around 4.2v on full charge??
Hi. Thanks. Use a 0.5W ~200 Ohm resistor at the +3V in and connect the battery.
Thank you bro ❤️
You are welcome
How much will this cost brother?
Send me an email to info.hazitech@gmail.com or WhatsApp +94779299171
bro i have 24lc08, can i make it a police LED with mod, do you have attiny code?
Sorry I haven’t used it. Code is linked in the video description.
Sir
mere pas to leptop nahi he mobaile se keyse kare please batado sir
Sorry I haven't tried with the mobile phone. Try using ArduinoDroid app.
Micro controller.. I hate that stuff.. L but it's soo good when you have the computer to find.. nice job. Brother
Thanks a lot.
please make something like this for the remote control version🙏🙏🙏
These designs and more are already in the remote control BOX version.
It's so cool project, perfect
Thank you so much.
Nice project 👍❤️
Thanks a lot
kohomada swith 2 k pawichchi karala signal light hadanne attiny 85 pawichchi karala
Meka balanna
DIY Universal Dynamic Turn Signal For Head lamp/ Fender/ Side mirror | ATtiny85 + WS2812B LED
th-cam.com/video/GJ-5YBT-5dc/w-d-xo.html
can this be used at 5V voltage?
Yes of course. Please use a step down voltage converter to make the input voltage 3V.
Or you could use a 220 ohm 1/2 resistor at the input.
can I use 5pcs LED 5mm each in each I/O?
@@HAZITECH but just now I read the data sheet from the Atiny85 microchip that the operating voltage can be up to 5V
@@HAZITECH how to get output 12v, for 12v led
very nice😃😍😍😍😍😍
Thanks a lot 😊
ne555 ic vip lights එකක් හදනවා දාන්න බැරිද
Time eka anuwa try ekak dannam. Thanks!.
Oya ic eka ඉලෙක්ට්රික් කඩවල ගන්න තියේද
Ow thiyanawa.
Online Electronic Stores Sri Lanka
store.zenix.lk/
tronic.lk
digitalelectronics.lk
www.menstore.lk
duino.lkw
scionelectronics.com
senith.lk
wire.lk
techshop.lk
robolabs.lk - Facebook
Atom electronic- FaceBook page
Thanks for the scheme and video! Please give hex file for ATtiny85
As usual the code is linked in the video description
Supiri👌 .. madata sudu led 1 danna puluwn code eka liyana widiya kiyala denna puluwn da..
Sorry bro meke medata white ekak danna ba wena channel ekak widihata mokada ATtiny85 eke pin okkoma me wedeta use karala thiyenne.
Ok bro.. ♥️ mama haduwe , oya light okkoa diode dala diode wala anith patta sudu led walat dunna eka... eka wenama pattu unanm lassnai.. 👌
Kohomada meka 12V walata convert karanne?
Mata mekata maximum LED kiyak add karanna puluwan weida?
Nathnam me programe karapu antytiny85 ekama loku circuit ekakata use karanna puluwanda
Lesima wede Pixel LED walin wede karana eka.
Man, this is so cool! But, isn't something like this illegal?
Thanks a lot. Since this is for RC vehicles, you should be good.
Kohomada program karapu atmel attiny85 ic eke program delete karanne
Wena code ekak ayama upload karaddi automa parana eka delete wenawa
@@HAZITECH thanks
Please LIKE and SUBSCRIBE to grow the channel.
Boss good stuff cheers
Super thanks
12 volt current denta puluvag da
Direct 12V denna ba. Voltage regulator ekakin 3-4 V walata adu karala denna oona.
Mobail phone se keyse ke please batado sir
Try using "ArduinoDroid" app
could you put this project to sell friend
I'm sorry. I don't sell.
Can you help me switch to attiny13?
Sorry low memory on ATtiny13
@@HAZITECH so on attiny45 it can be done. You can remove a few modes.
Yeah correct.
මේ Circuit එක 12 v වලින් වැඩ කරනවද broo
12V to 3V voltage regulator ekak danna
bhai police siren kese bnaye
In English please
Excelent wwwwwoooooooo
Thank you so much. More in the ATtiny85 playlist. Check those out.
Meke ic eka lankave nadda
Thiyanawa. Poddak balanna
tronic.lk
digitalelectronics.lk
www.menstore.lk
duino.lk
scionelectronics.com
senith.lk
wire.lk
techshop.lk
Nice brother ,already like and subcribe
Awesome. Thank you so much.
very cool project buddy, thanks for sharing. I had a question, the max current for each IO pin on the attiny85 is stated as 40 ma which is sufficient for 2 led's , but you stated that if we need more led's per channel we can increase but wont the power per led get lower and thereby the brightness.
Hey thanks a lot. You can safely use up to 4 3mm LEDs per channel. It wouldn't draw much power as those are not continually on with maximum brightness.
If you find this video enjoyable, I kindly encourage you to express your support by liking and subscribing. Your engagement not only fuels the growth of the channel but also serves as a tremendous motivation for me to create more captivating content. Thank you sincerely for your invaluable support!
Скажите пожалуйста а на digispark как можно сделать такую мигалку.
Тот же код будет работать на нем. Пожалуйста попробуйте.
Спасибо попробую
@@HAZITECH У меня не получается ,выдаёт вот такую ошибку #include
@@HAZITECH Arduino: 1.8.16 (Windows 7), Плата:"Digispark (Default - 16.5mhz)"
RC_Police_Light_Push_Button:6:20: fatal error: EEPROM.h: No such file or directory
#include
^
compilation terminated.
exit status 1
EEPROM.h: No such file or directory
вот такую ошибку выдаёт.
Add the EPROM.h library first to the Arduino software
Can't control remote
No this is manual
@HAZI TECH Can this work if powered by rechargeable 3.7v 2300mAh 8.6Wh battery?
👏🏼🥳Thank you much for all your videos!!!..Your effort is much appreciated. 👍🏼👍🏼I am subscriber now. 💯
Hi. Yes you can. Use a buck voltage converter to reduce the voltage to 3V. Thanks for subscribing me 😊
@@HAZITECH 👍🏼👍🏼Thank you!! Have a great weekend 🤓
You too 👍🏻
මේ circuit එක මෙහෙම හදලා ලොකු light වලට හයි කරන්න බැරිද ප්ලීස් reply
Ba sorry.
Это продается? за сколько продашь?
жаль не продаю
12v led වලට මේකම හදන්න බැය්ද
12V system ekak ikmanin dennam 👍🏻
Hello very hood
Thanks a lot
GOOD MAN
Thanks a lot
Can you sell it to me.
Sure. please reach out to us via email at info.hazitech@gmail.com or on WhatsApp at +94779299171
code aeka ganna bene😢
PC eken google drive link ekata yanna.
Me pc eken karanne mokakda
IC eka program karana eka
@@HAZITECH eka kare nethnam Ara light dising eka enne nedda
@@HAZITECH please
@Nima_Beats Na. Program eken thama okkoma data denne.
Bro not push button add timeer
Auto pattern change is there in the last pattern
shall i use 9vt battery for this?
You have to step down it to 3V.
do you have code??
Yes. It is linked in the video description as always.
@@HAZITECH thanks brother
You are welcome
ඔය රටා සේරම මරුවෙන් මාරුවට වැඩ කරන විදිහ ට හදන්න බෑයිද
Ooke anthima design eka ehema thama
gostei da pra fazer com ci555
Isso é mais fácil para mim. Você pode definitivamente tentar.
Please upload video reguraly🙏🙏🙏
Will do. Thanks 👍🏻
IC me code upload karke doge bhai
Go to ATtiny playlist to see how to upload the code
Muje code upload bala ic cahiya
Mera laptop nahiye
Ic ne 555බැරිද
Ba me system ekata set wenne na.
ප්රෝග්රෑම් කරල අයිසී එක කීයටද දෙන්නෙ බ්රදර් ♥️
IC eka witharak nam Rs.900 brother
💯💯💯👍🏻👍🏻👍🏻👍🏻
Thanks 😊
Cod eka balanna ba ne
Description eke link eka dala thiyanawa
Puluwn nm aiyage 4n no ekk dennko 🥺
HAZI TECH FB Page ekata msg ekak danna
👍👍
👍🏻
❤
👍🏻
ඔක ඩිරෙක් car බැටරියට දෙන්න බැරිද රිප්ලයි කරන්න අනිවා
Voltage regulator ekak dala voltage eka 3V wlata adu karala denna brother
ලයිට් ඔනි ගානක් දාල දෙන්න පුලුවන්නෙ නේද එතකොට කාර් එකකට
Meka thama car ekakata maru
th-cam.com/video/kPU33w24skI/w-d-xo.html
@@HAZITECH එක් බලල එන්නම් brother 😍
මේ ic එක ගන්න තැනක් නැද්ද
Online Electronic Stores Sri Lanka
store.zenix.lk/
tronic.lk
digitalelectronics.lk
www.menstore.lk
duino.lk
scionelectronics.com
senith.lk
wire.lk
techshop.lk
robolabs.lk - Facebook
Atom electronic- FaceBook page
мне нужно только 12 вольт
Use a 12V to 3V buck converter
Ciao hazi
Hi Tony😊
මීට පස්සේ මොකක් හරි හදන එකක් ගැන video දාද්දී කතා කරන්නකෝ නැත්තම් තේරුම් ගන්න අමාරුයි
මම උත්සාහ කරන්නම්. ස්තුතියි ☺️
ඔයා ඕවා විකුන්නෙ නැද්ද
Sorry na.
12 v
3V. For 12V, you need to use a voltage regulator .
Ok bro
@@HAZITECH 🙏please do that video ,12v connection
@@HAZITECH how to get output 12v