I been considering these, hopefully they do not rattle. I installed the NISMO catback on my 2023 P4x, and I love it. Not sure if you have thought about a exhaust. Shed some weight the OEM is very heavy.. the NISMO Tip/finisher is cool looking and the tone is nice, very subtle, and no drone in cabin.. Got mine from Z-1. I removed the tail pipe first, the rest was easy.. used a floor jack to support the muffler, did it myself and it took me 1 hour.
Nice job....the one thing I would recommend is to check the backside of the frame rails where you're going to drill....just to be sure there are no brake lines, wire harnesses, etc. Good luck on your move down south!
What was the other brand of liner were you referring to ? I have a 2024 Pro 4X and was looking for a wheel well liner, but pretty much all I could find is the RC one.
I been considering these, hopefully they do not rattle. I installed the NISMO catback on my 2023 P4x, and I love it. Not sure if you have thought about a exhaust. Shed some weight the OEM is very heavy.. the NISMO Tip/finisher is cool looking and the tone is nice, very subtle, and no drone in cabin.. Got mine from Z-1. I removed the tail pipe first, the rest was easy.. used a floor jack to support the muffler, did it myself and it took me 1 hour.
Nice job....the one thing I would recommend is to check the backside of the frame rails where you're going to drill....just to be sure there are no brake lines, wire harnesses, etc. Good luck on your move down south!
Aww shucks..... I guess I forgot to mention that didn't I?
What was the other brand of liner were you referring to ? I have a 2024 Pro 4X and was looking for a wheel well liner, but pretty much all I could find is the RC one.
I think the ones that I found were Husky brand and I glimpsed at them in Amazon.
@DoItYourselfDoItRight Yeah, I checked those out on Amazon and the Husky website and they don't make one for the Frontier, mainly for the Big 3.
8:54 that sounded a bit wet.
Ugg, drill the frame ? Hope someone comes up with a solution similar to the 1/2 ton trucks from big 3
Yeah I wonder if they could have designed it to work with the holes already present. Unless those holes are for something else
Where did you get the NISSAN ball cap?
I ordered it off of Etsy.