Installing Inner & Outer Tie Rods Nissan 370z + G37
ฝัง
- เผยแพร่เมื่อ 24 ก.ย. 2024
- How to install inner, and outer tie rods for Nissan 370z or G37. This did not fix my clunking noise unfortunately, but I will continue to figure out the issue. If you liked please leave a like and subscribe trying to reach 1,000 subscribers!
Music credits:
Buddha by Kontekst / kontekstmusic
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/2Pe7mBN
Music promoted by Audio Library • Buddha - Kontekst (No ... - ยานยนต์และพาหนะ
Hell yeah brother, love the video man. Try slapping that go pro somewhere in your fenderliner and see if you can hear/see exactly where that noise is coming from
Yeah, that’s exactly what I’ll need to do next. Thank you my boy!
@@WestCoastBuilt can’t wait to see more of S14
Yess! Love these vids
Thank you!
I have this noise but not sure what it is could I msg you to see if it’s the same noise you had?
Sure you could DM me on IG @ Gabe_Z34 or not sure if youtube has any kind of dm system but either works!
Did you find the noise?
I did find the noise this past weekend. I installed my diff bushings, subframe sleeve collars, diff brace, motor mounts, z1 sway bars, and trans mount. It ended up being my pro charger hitting the frame of my car. With the soho v1 Procharger kit you need to cut part of the frame of the car in order to fit it in the driver side. I ended up trimming more to give more clearance. Although with all the mods that I did to stuffin up the trans, motor, and rear end suspension it probably would have went away, but I trimmed more just to be safe. I have 2 videos I’m working on of the whole process, and I show that part in one of the videos. Sorry if this didn’t help your issue if you’re having one
🔥🔥🔥
What’s the turning the nut 12 times for?
That’s when you take off the spindle. Count the turns starting from the spindle pointing down, and then when you replace, count it back the amount. Gives a close alignment number, you still NEED an alignment after
Yes. It’s just so I can get my car close to the original alignment so it won’t be too out of wack. I still took my car straight yo get aligned the next morning.
@@xvirlazaro makes a lot of sense thanks fellas! 🙏🏽
You know if steering wheel play correlates with worn tire rods?
It could play a part, but what kind of play are you feeling?
@@WestCoastBuilt the steering wheel has a bit free movement before it actually starts turning the wheels.
Did you find the clonking noise ?
Yes I did, and I replied to Randy Gonzales, and explained what was going on. It’s in this comment section
Could be ur ball joints... everything went on my z at once..it could be ur sway bar end links as well...its a mess
@@galinkrastev4427 I replaced the end links that wasn’t the issue. I have actually found the issue since this video. It was the Procharger tapping the frame. I fixed it in my motor mount trans mount video
@@WestCoastBuilt nice