You are correct, fountain is the correct term. Duct is an alternative and very commonly used. I was a printer for over 30 years and don’t think I’ve ever heard the term fountain used in day to day working.
WHY ARE YOU SHOWING HIM TIGHTENING THE PLATE CLAMP WITH HIS FINGERS ????,,,, THIS IS WRONG , WRONG , WRONG ,,,,,WHAT DO YOU THINK THE WRENCH IS FOR ??? NOT ONCE DO YOU SHOW IT BEING USED,,,,YOU MUST SNUG THOSE UP NICE N TIGHT CAUSE OVER THE COURSE OF A LONG RUN THEY WILL FOR SURE COME LOOSE,,,THEY WILL NOT FALL OFF BUT THEY WILL COME LOOSE,,,,TO BE HONEST I'M NOT TOO IMPRESSED WITH YOUR SET OF VIDEOS SO FAR CAUSE YOU ARE PASSING ON A VERY VAGUE PICTURE OF HOW TO SET UP A GTO I'M GONNA WATCH THE REST OF 'EM ,,,,,I'M SURE TO HAVE MUCH MORE TO BE CRITICAL ABOUT CAUSE I HAVE TREMENDOUS RESPECT FOR HEIDELBERG EQUIPMENT AND WHAT THEY HAVE DONE FOR THE INDUSTRY,,,,I'M GONNA TRY AND CORRECT ALL OF YOUR MISTAKES,,,,EVEN HERE YOU LEAVE OUT THE MOST IMPORTANT ASPECT OF PRINTING , HOW TO SET YOUR INK KEYS,,,,,THE KEYS NEED TO REFLECT YOUR PLATE IMAGE,,,,SAY YOU HAVE A SOLID ON ONE HALF N LIGHT TYPE ON THE OTHER,,,,THIS TYPE OF IMAGE REQUIRES THE OPERATOR TO ADJUST HIS KEYS SO THAT THE DRAW IS PROPER AND CONSISTENT,,,THE LATTER WORD BEING VERY IMPORTANT ,,,,, ESPECIALLY WHEN YOU DO 4 COLOR PROCESS,,,,BESIDES LEARNING ALL THE MECHANICS OF THE PRESS YOU MUST LEARN THE FUNDAMENTALS OF THE INK FOUNTAIN IN ACCORDANCE WITH YOUR DWELL,,,,, YOU NOTICE THE DWELL GOES ALL THE WAY UP TO 60 IF MY MEMORY IS CORRECT AND THE REASON FOR THAT IS THIS,,,,,THE HIGHER YOUR SWEEP IS THE BETTER AS IT PROMPTS GOOD ACTION IN YOUR INK WHICH IS WHAT YOU WANT,,,, I HAVE SEEN MANY OPERATORS RUN A VERY LOW DWELL UNDER SAY 10 ALL THE WAY DOWN TO 1 OR 2,,,,THIS SHOULD NEVER HAPPEN ,,,,IT HAS HIGH NUMBERS FOR A REASON AND THIS IS IT,,,,,,YOUR KEYS CANNOT BE SET TO DRAW TOO MUCH INK , THEN YOU HAVE PROBLEMS,,,,,EVERY JOB YOU PRINT CAN REQUIRE BOTH MAJOR CHANGES IN BOTH THE KEY SETTINGS AND THE SWEEP ( DWELL ),,,,,, I WILL NEVER FORGET MY GOOD OL SUPERVISOR FRANK SHOWING ME HOW TO SET THE INK KEYS IN RELATION TO THE IMAGE AND HE EXPLAINED TO ME HOW THE DWELL WAS ALSO VERY IMPORTANT,,,,,HE WOULD SAY THAT I WOULD NEVER BE AS GOOD AS I COULD BE IF I DID NOT LEARN THIS VERY BASIC FUNDAMENTAL,,,,YOU DON'T LEARN THIS WITHOUT PRACTICE , PRACTICE , PRACTICE I WISH EVERY PRESSMAN ESPECIALLY THE APPRENTICES COULD LEARN THIS IS THE SECRET TO BEING A TOP NOTCH PRESSMAN,,,,,ANOTHER SECRET IS IN THE MAKE-READY PHASE AS THERE IS ALWAYS LOTS OF USED SHEETS FOR SET-UP,,,,,I HAVE FOUND THAT 50 SHEETS NEED TO BE RUN IN ORDER TO GET A GOOD READING OF YOUR INK,,,,AND EVEN THEN MAYBE EVEN 75 TO A HUNDRED MORE TO BE ABSOLUTELY SURE ,,,,,,ANOTHER SECRET I WILL SHARE ,,,,, BEFORE YOU DECIDE TO GET INTO THE GOOD SHEETS AND HIT YOUR COUNTER TRY TO MAKE SURE THAT YOUR COPY IS JUST HOW IT SHOULD BE AND ADJUST EITHER YOUR DWELL OR YOUR KEYS,,,,THEN RUN MORE MAKE-READY SHEETS ALONG WITH 10 OR 15 OF THE GOOD STUFF,,,,,,MAYBE HAVE A FELLOW PRESSMAN OR A SUPERVISOR DOUBLE CHECK THE IMAGE FOR PROPER COLOR , TYPO ERRORS ,,ETC, OR CHECK , CHECK AND DOUBLE CHECK,,,,THEN WHEN COMFORTABLE PUT WHAT IS CALLED YOUR LEAD SHEET ON YOUR VIEW- BOARD AND MAKE SURE YOU KEEP THE REST OF YOUR RUN THE SAME,,,,,,IF YOU ARE MAKING MAJOR CHANGES TO EITHER YOUR KEYS OR DWELL YOU ARE WHAT WE CALLED CHASING YOUR WORK WHICH SHOULD TELL YOU THAT YOUR WORK WILL BE INCONSISTENT,,,,,,TOO MUCH INK ON YOUR ROLLERS IS NOT GOOD EITHER AND ALWAYS REMEMBER TOO MUCH INK WILL CAUSE YOU TROUBLE,,,,,,,YOU SHOULD NEVER HAVE TO UP THE WATER AT ALL , TOO MUCH INK N TOO MUCH WATER WILL NOT BRING GOOD RESULTS,,,,FINALLY WHY DO YOU NOT SPEAK TO THE FEED BOARD N TALK OF AND SHOWING THE TOPIC OF REGISTRATION,,,,,SIDELAY MARKS ON YOUR SHEET,,,,,MAN OH MAN I THINK I JUST TYPED A BOOK,,, ALL WITH ONE HAND,,,,ON TO THE NEXT,,,,,AND I'M GONNA DO MY OWN TUTORIAL ON YOU-TUBE,,,, FOR THE 2 COLOR ALL THE WAY ON TO THE 4 COLOR,,,,,ON WE GO MATES
Mmmmm old school i love it
Gto merdane ayarlarinin Türkce videosu yok mudur?
VTST was here.
It's called an ink fountain. Not ink duct.
You are correct, fountain is the correct term. Duct is an alternative and very commonly used. I was a printer for over 30 years and don’t think I’ve ever heard the term fountain used in day to day working.
GTO 46 - GTO 52
👍🚩🇧🇷
1.58 to 2.03 lol
WHY ARE YOU SHOWING HIM TIGHTENING THE PLATE CLAMP WITH HIS FINGERS ????,,,, THIS IS WRONG , WRONG , WRONG ,,,,,WHAT DO YOU THINK THE WRENCH IS FOR ??? NOT ONCE DO YOU SHOW IT BEING USED,,,,YOU MUST SNUG THOSE UP NICE N TIGHT CAUSE OVER THE COURSE OF A LONG RUN THEY WILL FOR SURE COME LOOSE,,,THEY WILL NOT FALL OFF BUT THEY WILL COME LOOSE,,,,TO BE HONEST I'M NOT TOO IMPRESSED WITH YOUR SET OF VIDEOS SO FAR CAUSE YOU ARE PASSING ON A VERY VAGUE PICTURE OF HOW TO SET UP A GTO I'M GONNA WATCH THE REST OF 'EM ,,,,,I'M SURE TO HAVE MUCH MORE TO BE CRITICAL ABOUT CAUSE I HAVE TREMENDOUS RESPECT FOR HEIDELBERG EQUIPMENT AND WHAT THEY HAVE DONE FOR THE INDUSTRY,,,,I'M GONNA TRY AND CORRECT ALL OF YOUR MISTAKES,,,,EVEN HERE YOU LEAVE OUT THE MOST IMPORTANT ASPECT OF PRINTING , HOW TO SET YOUR INK KEYS,,,,,THE KEYS NEED TO REFLECT YOUR PLATE IMAGE,,,,SAY YOU HAVE A SOLID ON ONE HALF N LIGHT TYPE ON THE OTHER,,,,THIS TYPE OF IMAGE REQUIRES THE OPERATOR TO ADJUST HIS KEYS SO THAT THE DRAW IS PROPER AND CONSISTENT,,,THE LATTER WORD BEING VERY IMPORTANT ,,,,, ESPECIALLY WHEN YOU DO 4 COLOR PROCESS,,,,BESIDES LEARNING ALL THE MECHANICS OF THE PRESS YOU MUST LEARN THE FUNDAMENTALS OF THE INK FOUNTAIN IN ACCORDANCE WITH YOUR DWELL,,,,, YOU NOTICE THE DWELL GOES ALL THE WAY UP TO 60 IF MY MEMORY IS CORRECT AND THE REASON FOR THAT IS THIS,,,,,THE HIGHER YOUR SWEEP IS THE BETTER AS IT PROMPTS GOOD ACTION IN YOUR INK WHICH IS WHAT YOU WANT,,,, I HAVE SEEN MANY OPERATORS RUN A VERY LOW DWELL UNDER SAY 10 ALL THE WAY DOWN TO 1 OR 2,,,,THIS SHOULD NEVER HAPPEN ,,,,IT HAS HIGH NUMBERS FOR A REASON AND THIS IS IT,,,,,,YOUR KEYS CANNOT BE SET TO DRAW TOO MUCH INK , THEN YOU HAVE PROBLEMS,,,,,EVERY JOB YOU PRINT CAN REQUIRE BOTH MAJOR CHANGES IN BOTH THE KEY SETTINGS AND THE SWEEP ( DWELL ),,,,,, I WILL NEVER FORGET MY GOOD OL SUPERVISOR FRANK SHOWING ME HOW TO SET THE INK KEYS IN RELATION TO THE IMAGE AND HE EXPLAINED TO ME HOW THE DWELL WAS ALSO VERY IMPORTANT,,,,,HE WOULD SAY THAT I WOULD NEVER BE AS GOOD AS I COULD BE IF I DID NOT LEARN THIS VERY BASIC FUNDAMENTAL,,,,YOU DON'T LEARN THIS WITHOUT PRACTICE , PRACTICE , PRACTICE I WISH EVERY PRESSMAN ESPECIALLY THE APPRENTICES COULD LEARN THIS IS THE SECRET TO BEING A TOP NOTCH PRESSMAN,,,,,ANOTHER SECRET IS IN THE MAKE-READY PHASE AS THERE IS ALWAYS LOTS OF USED SHEETS FOR SET-UP,,,,,I HAVE FOUND THAT 50 SHEETS NEED TO BE RUN IN ORDER TO GET A GOOD READING OF YOUR INK,,,,AND EVEN THEN MAYBE EVEN 75 TO A HUNDRED MORE TO BE ABSOLUTELY SURE ,,,,,,ANOTHER SECRET I WILL SHARE ,,,,, BEFORE YOU DECIDE TO GET INTO THE GOOD SHEETS AND HIT YOUR COUNTER TRY TO MAKE SURE THAT YOUR COPY IS JUST HOW IT SHOULD BE AND ADJUST EITHER YOUR DWELL OR YOUR KEYS,,,,THEN RUN MORE MAKE-READY SHEETS ALONG WITH 10 OR 15 OF THE GOOD STUFF,,,,,,MAYBE HAVE A FELLOW PRESSMAN OR A SUPERVISOR DOUBLE CHECK THE IMAGE FOR PROPER COLOR , TYPO ERRORS ,,ETC, OR CHECK , CHECK AND DOUBLE CHECK,,,,THEN WHEN COMFORTABLE PUT WHAT IS CALLED YOUR LEAD SHEET ON YOUR VIEW- BOARD AND MAKE SURE YOU KEEP THE REST OF YOUR RUN THE SAME,,,,,,IF YOU ARE MAKING MAJOR CHANGES TO EITHER YOUR KEYS OR DWELL YOU ARE WHAT WE CALLED CHASING YOUR WORK WHICH SHOULD TELL YOU THAT YOUR WORK WILL BE INCONSISTENT,,,,,,TOO MUCH INK ON YOUR ROLLERS IS NOT GOOD EITHER AND ALWAYS REMEMBER TOO MUCH INK WILL CAUSE YOU TROUBLE,,,,,,,YOU SHOULD NEVER HAVE TO UP THE WATER AT ALL , TOO MUCH INK N TOO MUCH WATER WILL NOT BRING GOOD RESULTS,,,,FINALLY WHY DO YOU NOT SPEAK TO THE FEED BOARD N TALK OF AND SHOWING THE TOPIC OF REGISTRATION,,,,,SIDELAY MARKS ON YOUR SHEET,,,,,MAN OH MAN I THINK I JUST TYPED A BOOK,,, ALL WITH ONE HAND,,,,ON TO THE NEXT,,,,,AND I'M GONNA DO MY OWN TUTORIAL ON YOU-TUBE,,,, FOR THE 2 COLOR ALL THE WAY ON TO THE 4 COLOR,,,,,ON WE GO MATES
Cadê seus vídeos?