I just love this SA-10. It does have a rifled inner barrel . And it do field strip - just start with the barrel's thread cover. The pistol is simplicity itself. Love how it is built. Easy to disassemble it totally - if wanted to lighten up the trigger even more or whatever you wanna do to it. Simple internal parts that works way good. No wonder it is a good co2 pistol. Love the decent power output, good blowback - and accuracy. First off I were a bit reluctant to buy one (mainly for the "bling barrel") - but nowadays it is one of my top blowback pellet pistols.. I can but wonder how they effed up the trigger the dual-ammo Glock 17 that got released several years later. The trigger got way too hard to fire. The SA-10's trigger though is just awesome even it has to index the rotary drum while at it.. I'd personally would love to see a Sig Sauer P226 X-FIVE made this way. This pistol just reminded me a Sig so much that I had to buy one eventually..😁
The lower is polymer not metal, it is field strippable and as others have said, has a rifled barrel. The little nubs on the mag holders are also for seating the pellets into the cylinder mags.
So after years of you mentioning, I finally bought some flathead/wadcutter pellets. My feed issues in my CO2 guns are now over. Muzzle thread pitch is 14M X 1,0 if anyone needs to know.
Nice shooter. Iam with you on the gold. Silver or chromed like on the colt special combat would have looked better and would make it pop a little more and hammer and trigger in the same would look pretty as well. Good video and all the best from lancashire.
I'm looking into getting one and if I do I'll most likely remove the gold and try and cold blue it since I think the gold ruins it. Really cool looking air pistol otherwise.
zu Lwowitz Problems with SA 10 and those circulars mini-mags (clips) are evident from instruction videos and users’ review letters . I have shot several thousands steel BBs (they are faster than any pellet and make more recognizable impact ) and pellets of at least three basic materials : lead , composites , and single light metals with the range from 5.3 gr. to 16.20 gr. All the pellets did was to ruin my first SA 10 by getting out of the clip with bores in the rubber too big and getting stuck in the big mag with no easy way to get the mag out ; couple of them even crashed into each other in the barrel when the first somehow got stuck there ( all open to confirm by my dealer and my reviews letters ) . So , now I am merrily shooting-----while painting the front sight by white ( the old SA 10s have the front sights raw metal ; impossible to shoot fast )----- only BBs using the “BB plastic clip ,” hoping that some dealer sells me couple of these plastic guys for a few bucks and both , me and the pistol , are happy .
Bought one 2 days ago good little pistol , using the webley pellets to. Unfortunately my mag is leaking Co2 so i need to exchange it at the shop which they said they are happy to do apart form that i like the pistol.
Rack check the barrel m8 , i know it says smooth bore on the box , but on mine with closer inspection the barrel looks to be rifled and not smooth bore.
I ordered one. Was absolutely outstanding.......except the binary trigger stuck. The rate of fire was no good. The rotary mags would always fall all out. Power was great. Specs was great. Beautiful replica blowback. But, I'd rather have a gun thats more reliable than this. I've had C11s produce better accuracy and kill ratio for small game. Can't wait to return to Amazon.
Has no one had problems with this gun loosing pellets and bb's out of the magazines. I have tried several bb's and pellets and they fall out of the magazines and even roll out of the barrel when using bb's. Tried to get Umarex to send me some replacements and they refused! Spend you money on better guns like Daisy and Crosman!
the barrel isn't supposed to be gold haha, it takes inspiration from the taran tactical line of competition pistols, essentially replicating a titanium nitrate barrel finish.
I just love this SA-10.
It does have a rifled inner barrel . And it do field strip - just start with the barrel's thread cover. The pistol is simplicity itself. Love how it is built. Easy to disassemble it totally - if wanted to lighten up the trigger even more or whatever you wanna do to it. Simple internal parts that works way good. No wonder it is a good co2 pistol. Love the decent power output, good blowback - and accuracy.
First off I were a bit reluctant to buy one (mainly for the "bling barrel") - but nowadays it is one of my top blowback pellet pistols..
I can but wonder how they effed up the trigger the dual-ammo Glock 17 that got released several years later. The trigger got way too hard to fire. The SA-10's trigger though is just awesome even it has to index the rotary drum while at it..
I'd personally would love to see a Sig Sauer P226 X-FIVE made this way. This pistol just reminded me a Sig so much that I had to buy one eventually..😁
The lower is polymer not metal, it is field strippable and as others have said, has a rifled barrel. The little nubs on the mag holders are also for seating the pellets into the cylinder mags.
So after years of you mentioning, I finally bought some flathead/wadcutter pellets. My feed issues in my CO2 guns are now over. Muzzle thread pitch is 14M X 1,0 if anyone needs to know.
Nice shooter. Iam with you on the gold. Silver or chromed like on the colt special combat would have looked better and would make it pop a little more and hammer and trigger in the same would look pretty as well. Good video and all the best from lancashire.
I'm looking into getting one and if I do I'll most likely remove the gold and try and cold blue it since I think the gold ruins it. Really cool looking air pistol otherwise.
zu Lwowitz
Problems with SA 10 and those circulars mini-mags (clips) are evident from instruction videos and users’ review letters . I have shot several thousands steel BBs (they are faster than any pellet and make more recognizable impact ) and pellets of at least three basic materials : lead , composites , and single light metals with the range from 5.3 gr. to 16.20 gr. All the pellets did was to ruin my first SA 10 by getting out of the clip with bores in the rubber too big and getting stuck in the big mag with no easy way to get the mag out ; couple of them even crashed into each other in the barrel when the first somehow got stuck there ( all open to confirm by my dealer and my reviews letters ) . So , now I am merrily shooting-----while painting the front sight by white ( the old SA 10s have the front sights raw metal ; impossible to shoot fast )----- only BBs using the “BB plastic clip ,” hoping that some dealer sells me couple of these plastic guys for a few bucks and both , me and the pistol , are happy .
Nice review Mr Rackenstein. That bling makes it look like a "chemical" dealer's Co2 gun. Defo need some Humbro Enamel paint to tone it down a bit 🙂
Bought one 2 days ago good little pistol , using the webley pellets to. Unfortunately my mag is leaking Co2 so i need to exchange it at the shop which they said they are happy to do apart form that i like the pistol.
Rack check the barrel m8 , i know it says smooth bore on the box , but on mine with closer inspection the barrel looks to be rifled and not smooth bore.
Yes. It is rifled.
Has been quite a topic among owners of these thru the years.
Yep, definitely rifled.
Good videos,thanks
Love to have this gun, gold is cool bit different to the usual all black!!
I ordered one. Was absolutely outstanding.......except the binary trigger stuck. The rate of fire was no good. The rotary mags would always fall all out. Power was great. Specs was great. Beautiful replica blowback. But, I'd rather have a gun thats more reliable than this. I've had C11s produce better accuracy and kill ratio for small game. Can't wait to return to Amazon.
Don’t shoot bbs out of a Rifle barrel
Has no one had problems with this gun loosing pellets and bb's out of the magazines. I have tried several bb's and pellets and they fall out of the magazines and even roll out of the barrel when using bb's. Tried to get Umarex to send me some replacements and they refused! Spend you money on better guns like Daisy and Crosman!
the barrel isn't supposed to be gold haha, it takes inspiration from the taran tactical line of competition pistols, essentially replicating a titanium nitrate barrel finish.
Look like a copy of the sig saur p226
My reason I bought mine.😁
Not a big fan of the bling barrel though.
@@brorjordas1979 i was thinking of buying one myself and thought the same thing. Also not sure about the trigger.
Is that thing worth my money or should I stick with my P226 and STFU???
DIESEL IT MAKES YOUR FPS BOOST UP TO 150 % IF YOU DO IT RIGHT LOOK IT UP ARMOR PIERCING DEADLY MACHINES
THE GOLD MAKES IT BETTER