Great Skills Casting Available Brick Molds and Creating Beautiful Brick Models From Wood and Cement
ฝัง
- เผยแพร่เมื่อ 8 ก.พ. 2024
- Great Skills Casting Available Brick Molds and Creating Beautiful Brick Models From Wood and Cement
- แนวปฏิบัติและการใช้ชีวิต
![[LIVE] : ONE ลุมพินี 67 | คู่เอก "นักรบ vs ทาเกียร์"](http://i.ytimg.com/vi/eahGc1XmrEU/mqdefault.jpg)
If I start making one brick at a time now, I can start building my own house in about 10 years.
🤣🤣🤣
It would probably be cheaper than buying a house
that how i saw it 😆
☝️👍
Салом
To avoid having to disassemble, put hinges on three corners.
на два..
@@user-sc1wc1ze5fНет, на 3 и не спорь!
У меня была собака она тоже самое делала когда ей было скучно
а сейчас точно вы пишите или собака?
Great shape, but adding to other comments you may pain the wooden mold at least from inside by any sealer paint to prevent wood from moist.
Good start... Well done.
Lo ideal hubiera sido sujetar las dos caras del rectángulo con cada una de las dos caras cuadradas en sus extremos con ganchitos fáciles de desenganchar para que así al desenganchar luego las cuatro caras se despliegan cada una por su lado dejando libre la estructura de cemeto
Пару кирпичей в день )))
мне кажется это все шляпа чистой воды! Как мне кажется, Вам проще найти хорошую работу и купить эти кирпичи и построить ваш дом, чем заниматься этой ерундой!!!
собери кирпичи на дом за 10 лет
Качество смеси удивляет. Они даже не прокалены. Шляпа чистой воды. Плюс "под кирпич". Видели стык четырёх кирпичей? Нужно было блок делить на 4 кирпича. Чтобы верхний и нижний не повторялись. И то же самое по длине. Только чётные числа.
Для сарая идея может и нормальная. Но есть умельцы, они уже сделали приспособления для формовки кирпичей. Производительность около одного кирпича в минуту. И формовка с усилием в металлическую матрицу.
Excelente trabajo que lo bendiga ❤
Чего только не придумаешь, когда нечем заняться😂
Exelent 👍
2 кирпичину у день 700 у рiк, хата буде строiтись десь 10 рокiв, тiки коробка, це стройка на усе життя!
И на пенсию
@@user-nx1mo5oz2j согласен, надо 2 жизни, тогда можно у кирпичики играться!
А ты шевелись, заливай побыстрее, штук десять делать и в сушилку, желательно зимой, чтоб при топке отопления не терять напрасно тепло
Salary of 20 cent the hour is OK,but with western salaries the house would cost millions and take many years to build.
Говорят, что за месяц он сделал 5 или даже 6 кирпичей!👍
д не, по кирпичу в день точно отливает
Only another 2 million to go. LOL
very very nice thank yuo
great work
E ficou top mas tem que simplificar mais na hora de disiforma colocar uma abraçadeira pra fechar e abrir facilmente ok fora isso ficou show gostei 👍 fica a dica,,
Great work
Надо делать четыре , или два , или шесть горизонтальных рядов , тогда будет визуальная перевязка между блоками.
اخوي ماشاء اللة تبارك الله ❤🎉😊٠٠٠٠😊🎉❤
لكي تصنع لبنة واحدة يلزمك زمن طويل الفكرة جيدة لكن يلزمها تطوير في المعدات.
Super encore mille et j'ai fini 🥵
Wonderful
Good idea but the work isn't fasta
Thanks, bravo, respect, from Tajikistan
Me gusto el invento belleza
Excellent! I was thinking of doing something similar for years but never had the time.
I used to be a Quality Controller in 1 of the world's leading pipe and concrete beam manufacturers. I will use similar molds to make test cubes. The molds I used were made of iron plates. Of course, we can't spend so much on this. Wooden mold is good enough. But I would suggest you apply some grease oil or something similar to prevent the moisture in the cement from damaging the mold.
For connecting the sides of the mold, too much screwing and unscrewing will destroy the screwing area. So I suggest you use some Toggle Latches or Clasp Locks for easy removal.
Overall, this is a great project. You can make a good business out of this as well. Well done!!
Excelente. Trabajo. Felicitaciones. Al. Maestro. Artesano. Saludos. desde. Vicuña. CHILE. Guayo. El. Cantante.
Great works
👍👍👍👍👍👍👍!!!!!!!!!......
Да, уж.. И сколько тысяч лет ты будешь строить дом из таких кирпичей? 😆
روعة❤
Buen invento.. pero se demora mucho. Un aporte que le puede funcionar, le agrega bisagras al molde para que sea más práctico.. saludos desde Salto Uruguay 🇺🇾👍!!
It’s slow labour intensive hard work
Build the box with hinges and let the 4 sides open like a door . you won't have to unscrew the box every time
С такой технологией на склеп до смерти не собирёш ☝️
Que genial
Когда последний кирпич для дома будет готов, первый уже начнёт рассыпаться🎉
Así haces 4 en una hora..con suerte
Вообще красиво, но трудоемко. Кирпичей надо будет много, поэтому нужно что-то быстроразборное.
Show !
Bonito. Agora imagine voce fazer 1000 tijolos nessa rapidez.
that is neat
Quá lâu. Những thứ này phải làm bằng khuôn thép.
En fait il faudra 6 mois pour faire 100 briques , montage démontage , ils vendent des moules beaucoup plus simple d’utilisation
Should add to the mold an exterior mold, then cut it in half, mass produce the molds, fill them to make your decor bricks, put aside let them cure, at that point just remove the molds, easy peezy
It's a good idea. But only when you have a lot of time and don't know what to do! After 20-30 blocks, the structure will fall apart.
Supongo que usaras un antiaderente para evitar que el cemento se pegue en la madera
regular bricks with fake red brick siding, much faster and already red. got to give it to him for ingenuity.
El blok está muy bueno pero cuanto años lleva hacer 100 block ?
Buenisimo
An easier way would have been to hinge those side flaps to the base, and then you just lift it off
Se fizer todos os furos redondos poderá fazer a colocação de tubulação de água e luz ao mesmo tempo que levanta a parede
I might use threaded posts and wing nuts for quick reassembly and longer form life.
Good job 👍 ❤❤❤❤
Nice bricks . They take too long to make one
In the Next video fill a swimming pool with a bucket 🪣
물을 더 넣어 내용물을 질게
해서 틀에 넣고 조금 시간이
지난 뒤에 틀을 분리하면 내용물의 형태가 더 좋아질 것 같네요…
A ideia é boa, mas precisa melhora a parte de desenforma, imagine fazer esse mesmo processo 1000 vezes.
Skil yang luar biasa
esta muy buena la idea pero en ves de tornillos deveria llevar como ganchos mas rapido para desarmar y armar
That's a nice looking brick. You showed them stacked, how they look in running bond? Also I can see this be rather madning if you had to make thousands of these. If you plan on making alot of these bricks, you may want to find a more quick release. Like hinges and latches. Doing the screws not only takes alot of extra time, but it can strip the holes, and won't screw in anymore after so many uses.
Es mejor ponerle unas bisagras en cada esquina para montar y desmontar el molde algo mas práctico y rapido, porque de tanto desatornillar y atornillar se van desajustando los tornillos en la madera, tambien ponerle al molde un poco de lubricante para evitar que la mezcla se pegue al molde.
I wonder if you could just fill the mold with quickcrete and then add water.
Productivity" 3 bricks per one hour - great job.
Thought the same thing. The land where time is meaningless and there's nothing else to do.
If you have to make a lot of those bricks, it doesn't seem practical to make one by one. Last I heard, a local home improvement store might work better. :)
usar visagras ayudaria mucho mejor,, ahy otra opcion como broche mucha mas mejor
Se ve bien pero no es nada práctico.. cuando termine de hacer 100 bloques, se me olvida para que es que los hago..
The pies of wood that makes the lines in the block it be better if you glue them on so they don't crack them you should paint it to keep the wood from soaking up the water and it will help from the cement sticking to the wood the wood mold will come off easily and not stick
Nice effort but I think it needed one more row so that you didn't have double bricks
Very nice design, only a block made for single walls should bale to pass pipe and cable so the holes need to line up. Also the unnecessary hole on the middle will only eat up a lot of mud and make them difficult to lay. Just advice from an electrician. Nice effort besides.
Beautiful but what about using clamps instead of screws I think those screws holes will re-emerge out after sometime ❤
En vez de estar desarmando con cada ladrillo, creo que es más fácil cortar por la mitad el molde y sólo unir con una faja cuando hace un ladrillo y, soltar la faja para el desmoldado, listo!
🤝
Me gustan todos los videos donde puedo conseguir un molde de madera para ser bloks
крепление опалубки, можно сделать на "лягушках"
E se fazer esse tijolo liso e depois fazer massa corrida
Can i suggest you use a Polythene plastic inner coating to reduce moisture absorption and to increase repeat moldings, 🤓💡
Brilliant is ther a way of bonding them two molds to keep pattern
สุดยอดไอเดีย ครับ
ما شاء الله
The assembly and disassembly of the mold must be improved.
I invented something that makes disassembling and assembling the mold faster.
You with this mold in a day of work have approximately 2 hours or more of wasted time.
Improve your idea.
It has to be made of galvanized sheet metal or thick sheet metal.
The material to use has to be sand, Portland and water.
Vai gastar uma vida pra fazer 5.000 tijolos.... 😂😂😂😂😂😂
It great😍
demonstrate load bearing capacity. surely a more efficient process ... this pace will get you into build mode in a few years... other than that ... cool hobby for a day
Los ladrillos deben ir trabados
A questo punto, varrebbe la pena realizzare uno stampo almeno per metà blocchetto (ma, volendo, anche per 1/3 o 1/6, cioè di un mattone o mezzo mattone!). Inoltre, conglobando porzioni di rete metallica (sul tipo 4x4mm, 10x10mm, sp. 0,5, 0,7...) o tondini, i blocchetti potrebbero essere armati.
Sarebbe interessante considerare una modalità di incastro, tra i blocchetti, anche verticale, oltre che orizzontale.
Ancora: per il tubo, si potrebbe prevedere un tappo, in modo che di cemento dentro non ve ne entri per nulla.
Al posto delle viti credo sarebbe più pratico prevedere dei ganci a leva come quelli utilizzati per le valigie o per i bauli, o per le teglie da forno circolari.
Infine, più che uno stampo in legno, sarebbe adatto uno stampo in PVC o polipropilene: sul web ci sono video nei quali vengono realizzati oggetti partendo da dei tubi, prima aperti, poi distesi con il calore, e poi ancora tagliati a misura ed incollati.
E per concludere: va bene, la cosa a livello hobbistico, per strutture che non debbano sopportare sforzi particolari, più 'estetiche' che altro, poiché l'effettiva resistenza di detti manufatti, da quali prove sotto sforzo, sotto pressione, di resistenza, a tensioni varie, sarebbero certificati?
I LIKETHIS VIDEO IT IS AMAZING THANK YOU FOR SHARE TO VIEW AND I WISH YOUR CHANNEL MORE SUCCESS,
Nice work I would definitely use a mold releasing agent for easy removal
Tad costly as you will need to replace after so many bricks which will increase the overall cost, ( See my comment ), 🤓💡
Nice idea but it wll take too many molds to build. I need 100s.
Bien trabajando el bloque
Brilliant
Coloque um fundo e dobradiças em uma lateral e uma frontal que não precisa desmontar toda.
use one more bigger box and fix in it to avoid screwing every time.
Чтобы шурупы не крутить каждый раз надо сделать замки
Построил дом через 50 лет.
Идея хорошая, но лучше делать из металла и на вибростоле. дерево разбухает и бруски перестанут вытаскиваться через сколько то блоков.
Creo que si le fuera posible fabricar molde de métal con tenazas de presion que solo junte la s partes seria mejor. si no sabe soldar y tiene el esquema seguro se lo fabrican y le va abundar mucho mas, excelente proyecto
Me gusto
Imagine precisar fazer mil blocos desse jeito.
Brick looks nice
Make a proper metal mold with hinges
Order 10 of them .... will cost a bit but you will be in busines