drill press table with a fence & 2 vices in 1 / sliding dovetail rail [woodworking]

[@garystroupe3896]

I am amazed at your creativity sir. I have been working with wood for more than seventy years and am not easily impressed by the work of others. I also suffer from O.C.D. so, corners must be square and even, sliding parts must never hang and anything made must be able to be used by everyone. I simply love the simplicity of your creation. I can see myself making these not only for my drill press but for my router table and band saw also....keeping my old fingers away from the cutting edges of blades of any type is a preoccupation of mine. In any case, my hat is off to you sir.

[@j-woodworking9573]

Thanks for your lovely comment sir.

[@MarkThomas123]

What kind of wood boards are those at the beginning of the video at 00:30? Very nice wood.. Laminated Block Boards made from some type of wood.

[@kenemt3949]

I know I'm late to the party, but I'm making one of these now, and it is so cool.
It's forcing me out of my comfort zone, and making me think...
Thank you so much for the video.

[@stefanobianchi1551]

Excellent!!! Thank you very much Maestro! Greeting from Geneva, Switzerland

[@manuelramirezmartos3804]

Es usted un artista es un gusto observarle trabajando qué delicadeza en sus movimientos de manos y de herramienta enhorabuena amigo a mí también me gustaría algún día poder hacer las cosas como usted

[@chriscrystalhood6260]

I really enjoy your videos, your work is always top notch.

[@paulbergen6574]

Brilliant idea which I intend to use immediately. It appears that you've used hardwood that makes sense. I imagine a couple of potential improvements I wish to add to my version. First, I'd avoid presenting wood's side grain to the dovetail grove's overhang. I imagine that it could be better supported be running wood grain across it. In my attempt to do this, I'd build up the top section with pieces from a pallet plained flat and assembled in a glue up for three layers in exchange for the two you employ. Only my top section would be pivoted from perpendicular in order to cross the lower section with a mitre angel... 45°. This incline would slant the wood grain in order to support the weak point against the strain that can be expected from cinching down against the dovetail groove. In areas where high pressures are expected, further support can be given by aiming a sequence of screws upward from the bottom. My other alteration would use a circular sacrificial piece in the place that the drill bit is expected to erode. Even better would be to so place a smaller circle in the large circle so the sacrificial small one can be turned in place under the bit for countless opportunities to resist drill damage. The larger circle would be given a tapered edge because it can be entrapped during glue up. If done wisely, it could advance three sacrificial small circles in turn, each the same size and most easily replaceable. Thanks for your thought provoking video.

[@saulvaldezrodriguez1624]

MUY BUEN VIDEO, TE COPIO LA IDEA ..MUCHSA GRACIAS POR TU VIDEO,... SALUDOS DESDE MEXICO

[@samspade4634]

Just when I think you've made everything, you come along and put out another great idea. I love your gentle precision and look forward to seeing you again! Thanks for sharing.

[@j-woodworking9573]

Thanks for watching sir.

[@sadali8285]

.
. .! . ! .

[@sadali8285]

........... ...Dermawan t

[@ottorinopugliese7697]

Complimenti, un lavoro davvero ben fatto!

[@joedance14]

Beautiful work, as always! A build article or pdf plan would be helpful. Thank-you for inspiring us!

[@kripacalicut8535]

You said it gentleman 👍

[@mikecurtin9831]

Several excellent ideas. Thanks very much and thumbs up to crush a troll.

[@juliuspereira7067]

Simple, yet elegant and it works great. Thanks for sharing. Awesome job.

[@stvaldr]

Thanks!

[@markushartmann8049]

Absolut Klasse Anschlag wow und in Prinzip einfach nachzubauen
Sehr gut geworden 👍

[@kasader]

That is fantastic, and a great presentation

[@berndterstegen3840]

Great work! Thanks for sharing with us. I love that all is made from wood only (except some screws of course). Also the smooth precision is just great.

[@art-decodesign4850]

Magnifique 🤩…, très beau travail de qualité et précision 👍🏼 je vais me servir de vôtre expérience pour réaliser la mienne.., et un grand merci pour votre partage..,
Salutations from Genève 🦍🇨🇭🥋

[@ruatarengsicolneyrengsi8924]

Extremely neat in every way. Wonderful. Thanks for sharing.

[@Владимир-ы5ъ6д]

Отличная работа , однозначно в копилку .
РСФСР / СССР Иркутск (Сибирь)

[@jorgealbertorodriguezmolin2117]

Excelente. Muy bien explicado. Me podría pasar las medidas aproximadas de la base. muchas gracias.

[@JohnColgan.]

Great design & build, very flexible tool.
Thank you. & Stay safe

[@j-woodworking9573]

Nice to see you as always.
Please take a good care of you.
Thanks.

[@BrandonCabanillas]

Do you have pdf plans with dimensions and cut list

[@jaimerivera9949]

MAESTRO UNA BUENA NOCHE ME GUSTO EL DISEÑO ES MUY UTIL
SOY AFICIONADO A LA CARPINTERIA Y ME INTERESA PARA MI MI TALADRO DE BANCO
UN FAVOR ME PODRÍA HAYUDAR CON MEDIDAS Y TIPO DE MADERA QUE UTILIZA
UN FUERTE ABRAZO A LA DISTANCIA
DESDE QUITO ECUADOR ATT. JERV

[@cesargomezsaucedo3544]

man your work blowing my mind 🤯

[@guillo2388]

You are the best. Thanks for revealing so important information.

[@davidaubin3449]

🇺🇸👍 내가 만든 것보다 훨씬 더 나은, 나는 당신처럼 하나를 구축해야 할 것 같아요. 좋은 영상 감사합니다.

[@Heseblesens]

One of the most inspirational jigs I have seen from DIY here on TH-cam!
When I get my worrkshop up and running I will try to make something similar. Ten thumbs up!

[@j-woodworking9573]

Thanks for watching sir.

[@jean-claudedidierlaurent7215]

Bien, le matériel utilisé, nickel le réglage de couple de la visseuse surtout au début, tout est propre sans éclat de bois, sans parlottes inules , genre, j'me la pète, je sais tout; tout est dans les gestes , joli travail! J'aurais pas fait mieux, j'ai pas le matos!

[@edgardolopez4236]

훌륭합니다. 단 하나의 세부 사항만 누락되었습니다. 치수는 어떻게 됩니까? 고맙습니다

[@dscritter614]

I c u used Metrie boards. That added visual effects 2 ur cut out pieces. Neat!

[@tukangkayutaryosidomulyo3503]

🙏pekerjaan yang menyenangkan membuat alat bantu mempermudah bekerja,,,👍❤️

[@marcusviniciusdeoliveira8269]

The job was very good. Congratulations!!! A tool built with a lot of capacity and zeal.
Thank Marcus 🇧🇷

[@j-woodworking9573]

Thanks for watching sir.

[@kripacalicut8535]

Brilliant job❤️
Kindly add a plan as well 👍

[@gimezzina1958]

Very wonderful job but I have a question: Which kind of wood used for this plan?

[@KSFWG]

I think it was 2 small hardwood cutting boards he purchased somewhere or 2 pieces of flooring.

[@martinmccartan739]

Hi great build .The wood you used ? Looks like kitchen work top

[@j-woodworking9573]

It is rubber panel. I use it for better presentation. Plywood would be enough for general work shops.
Thanks for watching sir.

[@Grassy20]

As always, really great! This gave me an idea for a project that I need to do. I need something to slide and I really like the 45 degree cuts you made to allow that piece to slide.

[@j-woodworking9573]

I hope you'll succeed in it.
Thanks for watching sir.

[@neildunbar1231]

You Sir are a pleasure to watch! Brilliant ideas and precision. Thank you

[@j-woodworking9573]

Thanks for watching sir.

[@marcaogdm]

I really liked this project, are you selling it?

[@j-woodworking9573]

No, it's for me.
Thanks for watching sir.

[@breakinn403]

Very nice full control jig. Well done and nicely edited to keep the viewer interested.

[@j-woodworking9573]

Thanks for watching sir.

[@ernestomorell4489]

FELICITACIONES DE São Paulo. BRASIL👍👍👏👏

[@j-woodworking9573]

Thanks for watching sir.

[@lint2023]

Very nice. I like it very much. I believe wood glue is so effective that you do not need the screws.

[@j-woodworking9573]

Thanks for watching sir. Because of lack of my experience I'm not sure yet.
Thanks for watching sir.

[@kiwistew1]

Perfection. I only hope I can make it half as good as this. Thank you.

[@j-woodworking9573]

Thanks for watching sir.

[@MrDeshojo]

Hello,
what kind of duct tape do you use?
Thanks

[@amtiensinh8416]

Nice video, good idea 👍

[@jean-pierre-cane]

Bonjour,
Magnifique réalisation !
Vous êtes ingénieux.
Pouvez-vous me dire quel type de bois vous utilisez svp ?
Les outils de perçage également.
Merci pour votre attention.
Bien à vous

[@j-woodworking9573]

I used rubber tree. But I recommend you use plywood. Thanks for watching sir.

[@goptools]

Hi Mr. J,
That is a handy and versatile table for the drill press. I like the blocks you added underneath, which will make sure the table is always aligned on the drill press. Thank you for the video!
-mike

[@j-woodworking9573]

Thanks for watching Mike.

[@valterleao6795]

PARABÉNS...., sempre muito competente, certamente esse dispositivo ajuda e muito nos trabalhos, gosto de como o amigo é meticuloso na confecção das peças, classifico como QUALIDADE!
Abraço aqui do Brasil 🇧🇷

[@j-woodworking9573]

Thanks for watching sir.

[@keupondestroy911]

Merci beaucoup pour la vidéo c'est super

[@felipelim7201]

Good idea. Excellent work.

[@j-woodworking9573]

Thanks for watching sir.

[@cindyharrison4191]

Wonderful, functional and beautifully made.

[@j-woodworking9573]

Thanks for watching sir.

[@Gus0046]

Que calidad de trabajo y de bien hecho. Te felicito excelente trabajo.

[@j-woodworking9573]

Thanks for watching sir.

[@rzaceylan4435]

Çok iyisiniz eline emeğine sağlık kolaylıklar diliyorum işiniz gücünüz rast gelsin selamlar

[@didiersentilly5560]

superbe travail , belle idée c'est cool bravo à toi. bonne semaine et bon travail.

[@j-woodworking9573]

Thanks for watching sir.

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , como todos los que usted hace , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España)😜🤓🤣

[@j-woodworking9573]

Thanks for watching sir.

[@geraldnovakowski7692]

Great build J! Do you have plans you would sell?

[@j-woodworking9573]

Sorry I don't have any plans.
Thanks for watching sir.

[@eliezervellasco3347]

trabalho maravilhoso muito bom mesmo continue com esse talento

[@lindaloftus8780]

Great project. Very nice work.

[@j-woodworking9573]

Thanks for watching sir.

[@LeosTueftelei]

Excellent ! Good idea and a nice job ! 👌 👍 👍
Greetings from Austria 🙋‍♂️ Leo

[@j-woodworking9573]

Thanks for watching sir.
From Korea.

[@stormman8393]

Love it. Very very good invention

[@j-woodworking9573]

Thanks for watching sir.

[@banditva8040]

Have a plan for this.

[@woodymartl]

Hello, that's so amazing and pretty. And a very good job you've done. The drilltable is very practicable and save. How much time you spend in this project? Thank's for this Video. Best wishes for the next work from Bavaria for you and the family all the best.
Good luck and bye from Martin. 🗜🔩🔧🛠⚒⛏🔨🗜🔩🔧🛠⚒⛏🔨👏👏⭐⭐⭐⭐⭐

[@j-woodworking9573]

Making it and making a video at the same time, it takes some 2 days. Thanks for watching sir.

[@markhedquist9597]

Exceptional. Quite exceptional.

[@j-woodworking9573]

Thanks for watching sir.

[@adesusanto8733]

really amazing idea💡
the thought that so far is having to buy some rail kits, just enough to use the wood completely.

[@j-woodworking9573]

Thanks for watching sir.

[@hupajo]

WOW - suuuuuper job 👍👍👍

[@j-woodworking9573]

Thanks for watching sir.

[@antony2592]

Bel lavoro, ma le misure del piano inferiore quali sono? Grazie

[@SergioGonzalez-vo3wx]

Like my friend 👍👍🙏🙏

[@j-woodworking9573]

Thanks for watching friend.

[@karlkarrasch8113]

Das ist Präzision perfekt

[@frankkamolov3815]

Как всегда прекрасная идея и работа. Спасибо за полученное удовольствие от твоего творчества. Удачи тебе во всём.

[@j-woodworking9573]

Thanks for watching sir.

[@paulstanding7267]

Hi really nice well thought out jig keep well and stay safe 😀

[@j-woodworking9573]

Thanks for watching sir. And please take a good care of yourself.

[@davidstorton910]

It's just a shame we can't get Micky wood in Europe and I can't think of anything else hard enough that wouldn't cost a fortune (ply wouldn't work)

[@mminorhsd]

got to make one for my shop!

[@j-woodworking9573]

Thanks for watching sir.

[@PapyAndre]

Good evening little question can you tell me where we could find your table model, wonderful achievement

[@j-woodworking9573]

Table model?
I don't know what you mean. Sorry.

[@PapyAndre]

@@j-woodworking9573 hello do you have an idea or a plan of the table model of your column drill, thank you good wk and happy new year 2022

[@j-woodworking9573]

Sorry I don't have any plans sir.

[@KipIngram]

That is quite lovely - I definitely want to make that.

[@j-woodworking9573]

Thanks for watching sir.

[@nelsonw2096]

Well done!

[@Vitaly_Nezhinsky]

Wouldn't the humidity make the table spin?

[@j-woodworking9573]

Yes I think so.

[@pdstokes8]

Excellent tool. Thank you.

[@mtjm]

Very nice work. I notice you use phillips screws with all your projects tho. Why not switch to torx head?

[@j-woodworking9573]

Thanks for your kind advice sir.

[@Dadymilles13]

Super , merci je m abonne....;-)

[@francisconascimento2034]

Fantastic, muito bom , excelente, Brasil 🇧🇷

[@Erik_The_Viking]

Beautiful job! Much better than using aluminum t-track.

[@j-woodworking9573]

Thanks for watching sir.

[@m5ajr874]

Best & great idea 👍⭐⭐⭐⭐⭐

[@j-woodworking9573]

Thanks for watching sir.

[@robertsoncletokoerner7012]

Muito bom, parabéns e obrigado pelo ensinamento. Robertson (Brasil)

[@j-woodworking9573]

Thanks for watching sir.

[@richarnaud7794]

GENIUS!

[@petery53]

Beautiful work sir.

[@j-woodworking9573]

Thanks for watching sir.

[@jorgealbertorodriguezmolin2117]

le pregunto desde Argentina.

[@j-woodworking9573]

Greetings from Korea.
Thanks for watching sir.

[@andrzejwrzosek8301]

super sprzęt chodzi mi tylko o materiał jaka grubość płyty

[@j-woodworking9573]

Thanks for watching sir.

[@herrj.muller3624]

Great ideas ...thanks for that.

[@j-woodworking9573]

Thanks for watching sir.

[@MCsCreations]

Fantastic work, my friend! Really amazing! 😃
Stay safe there with your family! 🖖😊

[@j-woodworking9573]

Thanks for watching friend. And please take good care of yourself.

[@TheTawerner]

great video - how to get the measurements

[@j-woodworking9573]

Sorry I don't have plans.
Thanks for watching sir.

[@stevenong6611]

Good idea beautiful

[@j-woodworking9573]

Thanks for watching sir.

[@tomowens2720]

Excellent as always!
A pleasure for me to watch. 👍

[@j-woodworking9573]

Thanks for watching sir.

[@rolandgdean]

Now THIS thing, or something similar, I NEED to make. Great job sir and yet another great video. And now you've hit 130k subscribers too! You're taking off like a rocket buddy. You've done so much hard work. You deserve it.

[@j-woodworking9573]

Thanks to your kind and strong support I could come here. Back beginning my TH-cam channel I was poor at everything such as woodworking skills and knowledge, pictureing and editing. These days I'm fully satisfied with my performance. Also happy to know you far from here.
Thanks a lot buddy.

[@patrickbecquet1556]

belle réalisation et très pratique, quel est le bois utilisé pour cet outil?

[@j-woodworking9573]

Rubber tree panel.
Thanks for watching sir.

[@haddouasma]

Best regards.

[@xXzngetsuXx]

peut on avoir les plans de vos realisations d outils j adore votre trvail bravo

[@j-woodworking9573]

Sorry I don't have plans.
Thanks for watching sir.

[@Lind_Knight]

Когда показываешь и практическое применение, выходит нагляднее.

[@j-woodworking9573]

Thanks for watching sir.

[@robertmadden7536]

Love your work mate

[@j-woodworking9573]

Thanks for watching mate.

[@grandtrunk49]

Excellent work but unless you just love woodworking it’s probably simpler to buy one.

[@j-woodworking9573]

Thanks for watching sir.

[@volmirmartello6789]

Esse corte das tábuas foi feito a 45°?

[@j-woodworking9573]

35 degrees. Thanks for watching sir.

[@volmirmartello6789]

Ok obrigado

[@j-woodworking9573]

감사합니다.