I have a problem of caterpillar 320e me i ask why the engine bugdown when you knocking the ecm? But then it's ok to start again. If you every knocking the ecm it's always warning the other sensor or all
Thank you so much But I have a problem with 323d excavator after starting the engine and you put the hydraulic leave down the one on let hand said the engine is going off what could be the problem?
Thank you very much Sir for granting my request..now it's very clear to me how to copy it.. but one thing Sir if how and where i can get the flash file needed to complete the re configuration.. once again thank you Sir for this video.. God bless always sir..
brad thats the problem,maybe you can get the flash file through local dealer,ng iyong machine i dont know kung magbbigay sila kahit sabihin n babayaran mo, ung flash file n meron ako nagkataon n meron nag offer s company namin na free testing for one week, complete set ng CAT ET e meron n ksama flash file kya ung nakuha ko lahat almost 25k n flash file ang meron ako,yan ang nagagamit ko ngayon s lahat ng mga ginagawa ko nkailangan e program for new version
@@caterpillarjhunhunk yon nga problema Sir ayaw mgbigay ng Zahid Tractor ng flash file..cge Sir salamat ng Marami sa tulong mo sir.. God bless always sir...
Hello sir! thank you very much! Do FLS and FTS fields needs to be programmed, and is it possible to do with a replacement file and a copy configuration tool?
Hi sir, I have a cat 322c excavator, I have been having problems for a few days now, the engine display is low and the hydraulic level is low, the engine oil pressure is low. Let me know what you think
Hi boss, nice video I love it I was wondering if you know how to deactivate ECM Test Mode so we don’t have to wait 24 hours to program it , thank you so much
my friend l have cat 160m grader. I connect ET. There is showing. Calibration Out Both Steering Jack Left and right but ET Not calibrate this ET.2019 Model there is some files missing I thing need to be install SIS2.0 How to parches and install and calibrate please can you explain me
Greetings from Serbia! I hope that you can help me. When I open service mode on monitor I have only two options-maintance and password change, all other options-diagnostic, ECM, info, status, calibration-are lost. Do you have any idea how I can get them back?
Brad try mo mo eh check ang power supply kpa.nka.on n ang susi bka nag karoon ng kalawang ang mga terminal positive at negative aling dyan s dalawa pweding naglloose contac yan
Is it possible sir we can buy already programmed ecm? Or can you upload sir first start of the excavator after installation of new ecm sir? Thanks i want to see the dashboard after installation
sir sorry for the late responce,if you are talking caterpillar,the ecm that they selling is emty meaning no program.the only way you can do is if you have contac or friends in cat so maybe you can ask a pabor if they can,because the programming is different amount,i think i have a video regarding about the programming and starting after programming
bro it is not possible to transfer through email or what, only catepillar company can only transfer online from there own software, and also not at part no can found the software, you have looking at the exact software no
sinsya n ngayon ko lang nabasa message mo,about dyan sa problem nga machine,hindi ko masabi kung anu talaga ang iksaktong problema dati o kung anu nba ang mga nagawa n dyan bago nagkaganyan,ung storya ba,pra may idea ako s mga pwede nating e apply na proces kung anu at saan maguumpisa,ask ko lang kailan kyo nagpalit ng hydraulic oil,filter,at anung klasi ng oil ginamit.ksi ppwedi ksi n mababa n ang viscosity ng langis,or baka ung oil filter mo sa hydraulic eh subrang tagal n hindi napapalitan,yan muna dapat alamin s pag ttrouble shoot mahirap ksi mag direct s mga major n valve,un pla nsa minor lang ang problema,ha check nyo muna ung mga nsabi ko.or pwede nyo rin ako e add sa whatapp +971567581176 pra mabilis ang usapan ha.
Sa auction kasi namin kinuha last week lang kami nag change oil w20-30 gamit namit langis oil 10 ung hydrolic oil nya bago rin filter ung nasa tangke ng hydrolic na filter lang ang d namin napalitan lahat bago na
Sir my tanong lng Sana ako yong forklift my sign sa dashboard load/unload ano bang common na sira nyan...ECU ba or Meron pang iba...that's my question sir thank in advance sa sagot sir..
kung wla kang flash file,the only way n you can do, ay reconfigure from the other machine with lates version,copy mo lang ung configured file nya then yung ang e program mo for your machine,but before mo gawin yan you have to make it sure n naka save ung original configuration ng machine mo just in case n hindi suitable ung lates version maibabalik mo ung dati.,so everytime na magrepair k lalo n electrical related problem,you have to copy all the configuration ng machine n gagawin mo,pra secure kna kung sakali man n naiinis k at na out of focus kna,ang tanging nsa nsa isip nlang baka reprogram lang mag ok na dahil meron knang copy ng configuration so no worry.
Bro if you want to delete fault code just go on service menu then choose diagnostic ,then select logged fault code then delete it by pressing the left arrow botton then select yes for delete
This video is very very clear sir ,,thanks sooo much ,,,can you make another on diagnosing active codes and resetting them I mean deleting 🎉
Don't worry sir just give me a little time for that, actualy if you want to reset error codes you need to rectified active error
Your videos very useful sir love from India 🇮🇳
bro thanks for your support
I have a problem of caterpillar 320e me i ask why the engine bugdown when you knocking the ecm? But then it's ok to start again. If you every knocking the ecm it's always warning the other sensor or all
Contac me in whatsapp+971567581176
Thank you so much But I have a problem with 323d excavator after starting the engine and you put the hydraulic leave down the one on let hand said the engine is going off what could be the problem?
check power shift solenoid located at the main pump
Thank you very much for the good training
Thanks sir
Clearly explained thanks brother
Thanks bro
Thank you very much Sir for granting my request..now it's very clear to me how to copy it.. but one thing Sir if how and where i can get the flash file needed to complete the re configuration.. once again thank you Sir for this video.. God bless always sir..
brad thats the problem,maybe you can get the flash file through local dealer,ng iyong machine i dont know kung magbbigay sila kahit sabihin n babayaran mo, ung flash file n meron ako nagkataon n meron nag offer s company namin na free testing for one week, complete set ng CAT ET e meron n ksama flash file kya ung nakuha ko lahat almost 25k n flash file ang meron ako,yan ang nagagamit ko ngayon s lahat ng mga ginagawa ko nkailangan e program for new version
@@caterpillarjhunhunk yon nga problema Sir ayaw mgbigay ng Zahid Tractor ng flash file..cge Sir salamat ng Marami sa tulong mo sir.. God bless always sir...
Very helpful information sir.
thanks bro
Hello sir! thank you very much! Do FLS and FTS fields needs to be programmed, and is it possible to do with a replacement file and a copy configuration tool?
no problem bos as long as you understand about what you are doing, or else you loose the original program
Hi sir, I have a cat 322c excavator, I have been having problems for a few days now, the engine display is low and the hydraulic level is low, the engine oil pressure is low. Let me know what you think
Hi boss, nice video I love it
I was wondering if you know how to deactivate ECM Test Mode so we don’t have to wait 24 hours to program it , thank you so much
Pls can you contac me in my whatsapp, +971567581176, for more details and fast conversation
Generous Master !
thanks bro
my friend l have cat 160m grader. I connect ET. There is showing. Calibration Out Both Steering Jack Left and right but ET Not calibrate this ET.2019 Model there is some files missing I thing need to be install SIS2.0 How to parches and install and calibrate please can you explain me
Bro contac me in my whatsapp +971567581176 i need more details about your machine and laptop
Sir thank you much sa information! I'm not a CAT mechanic just a fan specially C15 in particular tanong lang pwedi po ba alter flash files ng engine?
pwede nman basta the same function ng flashfile
Kindly upload the Injector trim file download and installation and engine timimg calibration.
Very useful
Thanks
Làm thế nào tôi có thể liên lạc với bạn
I have shut down engine when over load.
thank you master!
Do you know how to upload .PCL file into my PL1000E?
Contac me in my whatsapp, +971567581176
Helo new subcriber nyo po. Gusto po sana paturo sa pag gamit ng CAT ET.
contakin mo ako s whatsapp +971567581176
@@caterpillarjhunhunk maraming salamat sir.
Greetings from Serbia! I hope that you can help me. When I open service mode on monitor I have only two options-maintance and password change, all other options-diagnostic, ECM, info, status, calibration-are lost. Do you have any idea how I can get them back?
Bro contac me in my whatsapp+971567581176
Sir tutorial po from the beginner user of CAT ET,paano i activate yung net.pls sana mapansin mo po ito thanks.
sir anung ibig mong sabihin na e active ang net for what purpose sir,ng net n gusto mong malaman
Cat 740 pag on sa susian iilaw tapos namamatay ano kaya problema sir ok naman mga fuse nya
Brad try mo mo eh check ang power supply kpa.nka.on n ang susi bka nag karoon ng kalawang ang mga terminal positive at negative aling dyan s dalawa pweding naglloose contac yan
Is it possible sir we can buy already programmed ecm?
Or can you upload sir first start of the excavator after installation of new ecm sir?
Thanks i want to see the dashboard after installation
sir sorry for the late responce,if you are talking caterpillar,the ecm that they selling is emty meaning no program.the only way you can do is if you have contac or friends in cat so maybe you can ask a pabor if they can,because the programming is different amount,i think i have a video regarding about the programming and starting after programming
Good day sir please I need the Caterpillar Electronics technician. For cat 3500c
tel me what was the problem and were is your location
Thank you ❤️❤️
welcome
Sir God pm po ano po kayang sira ng CAT 320gc namin biglang nalang po bumabagsak boom nya
Pwede mo b ako kontakin s whatsapp +971567581176
نتمى منكم الترجمة
Can I get flash file for 320D2 ECM p/n 388-8821..
bro it is not possible to transfer through email or what, only catepillar company can only transfer online from there own software, and also not at part no can found the software, you have looking at the exact software no
Sir good day po. Cat 320d c6.6 engine. Pag nag install ng new ecm di po ba aandar yan? Kailangan po ba i re program yan?
Hindi ko maintindihan kung anu ang ibig mong sabihin, anu nba ang mga nagawa nyo st anu ang problema
How to do engine timing Calibration
bro. sorry for late responce, pls contac me in my whatsapp +971567581176
sir magandang araw po. pwede po ba magpadala ako saiyo ng ecm ng cat c9 para ipaayos or papalitan ng bagong ecm?
pwede nman kya lang saan kba ngayon,at anu problema ng ecm mo
Tanong lang sir excavator pc60-7 humihina lahat pag ginamit 4 n oras lang ginamit halos ayaw na gumalaw kung malamig naman o.k naman
sinsya n ngayon ko lang nabasa message mo,about dyan sa problem nga machine,hindi ko masabi kung anu talaga ang iksaktong problema dati o kung anu nba ang mga nagawa n dyan bago nagkaganyan,ung storya ba,pra may idea ako s mga pwede nating e apply na proces kung anu at saan maguumpisa,ask ko lang kailan kyo nagpalit ng hydraulic oil,filter,at anung klasi ng oil ginamit.ksi ppwedi ksi n mababa n ang viscosity ng langis,or baka ung oil filter mo sa hydraulic eh subrang tagal n hindi napapalitan,yan muna dapat alamin s pag ttrouble shoot mahirap ksi mag direct s mga major n valve,un pla nsa minor lang ang problema,ha check nyo muna ung mga nsabi ko.or pwede nyo rin ako e add sa whatapp +971567581176 pra mabilis ang usapan ha.
Sa auction kasi namin kinuha last week lang kami nag change oil w20-30 gamit namit langis oil 10 ung hydrolic oil nya bago rin filter ung nasa tangke ng hydrolic na filter lang ang d namin napalitan lahat bago na
@@oliverbotoog9670 try nyo muna palitan o tingnan nyo ung filter n nsa loob ng tank
Hi master, please can you help in getting the ET software and COM adaptor. I will appreciate if you can help with this.
Bro many online seller on internet and check the capability if they can deliver to your country
@@caterpillarjhunhunk thank you very much. Please can I get the flash file for 1206D Perkins, software no 5610971-00
excellent i need flash files can i???????
or can you send???
how i can give you? i was already try through email but is isn't work
@@caterpillarjhunhunk
How much its size??
SIR PATURO NAMAN PO KUNG PAANO GAMITIN ANG CAT-ET
sige contakin mo ako s whatsapp +971567581176
Can you continue
i'm sorry but i dont know what do you mean
Paano rin po i clear ang configuration sa ECM bossing
Kong mag cconfigure o reconfigure isang file.n ung n eh program s ecm or ecu
Sir my tanong lng Sana ako yong forklift my sign sa dashboard load/unload ano bang common na sira nyan...ECU ba or Meron pang iba...that's my question sir thank in advance sa sagot sir..
Sir pwede ba sya isave sa USB pag na copy configured na?
pwede nman brad ,then s ET mo lang din un magagamit
Hello sir how to used sis program
open sis and you read allover there
Thank you very much. How can I contact you?
my whatsapp +971567581176
@@caterpillarjhunhunk thank you Sir
Sir paano kung wala kang flashfile?
kung wla kang flash file,the only way n you can do, ay reconfigure from the other machine with lates version,copy mo lang ung configured file nya then yung ang e program mo for your machine,but before mo gawin yan you have to make it sure n naka save ung original configuration ng machine mo just in case n hindi suitable ung lates version maibabalik mo ung dati.,so everytime na magrepair k lalo n electrical related problem,you have to copy all the configuration ng machine n gagawin mo,pra secure kna kung sakali man n naiinis k at na out of focus kna,ang tanging nsa nsa isip nlang baka reprogram lang mag ok na dahil meron knang copy ng configuration so no worry.
@@caterpillarjhunhunk ok sir jun..salamat sir..
how to delete fault codes cat 320d excavator cat 10 digit factory password
Bro if you want to delete fault code just go on service menu then choose diagnostic ,then select logged fault code then delete it by pressing the left arrow botton then select yes for delete
Yarxamukumullaah
salam
dp4ed2
#von.ngo
Ano facebook page nyo sir?
facebook.com/Hydraulic-technic-jhun-107172975078305/
ito sir page ko
Sur owedi po bang e overwrute yung feature ng kmp to rby ecm?
depende yan syo e save mo muna ang configured file ng ecm bago mo gawin ang gusto gawin