Hi! I absolutely have to try to do this later. You are the ONLY person offering help to those of us who have lost our charger cases. It appears your method works for ANY brand as well! Very nice! Are you using a magnet with that screw thing? I am totally oblivious at the moment and know I'm going to have to watch this a few times. I am currently skimming through (as my daughter is creating havoc with her juices and syrup...) And anything else she can use, taking from the fridge while I'm distracted! If it is not too much to ask can you please respond with a list of the items you're using so I can get them together later? Thank you so much regardless! I think I can do this!
1. small srew / you can use small magnet 2. usb wire / phone charger wire 3. speaker terminal connector / white plastic i inserted the 2 wire inside 4. digital multimeter / to locate the positive and negative 5. glue gun earbuds has a magnet inside so i use screw, just careful to the polarity ( positive and negative ) thanks for watching..
I'm at the stage of putting the wires through the terminal connector but i don't have one. Is there another way to attach the wires to the terminals of the earbud with stability?
Chaa gaya yaar So useful idea for me Actually i got samsung copied buds a gift and it's not working because box is not charge it Alot love from pakistan
Hi there! Great video, I'm trying to do the same for the sennheiser cx400, but they have 4 pins and I can't get it to work.. any recommendations? Thanks for the video
Do we need all those parts? I only ask because I'm currently homeless and it's hard to get a hold of certain things like the volt meter and the little piece you put the wire to
Bro ye usb cable direct charger se connect Karin ya power Bank se karenge ya fir dono main hi laga sakte hain batana yar Mera Bluetooth ka case khogaya ???
@@mohamedreda-nn2kq let the earbuds full charge then power ON, earbuds automatically pairing ( lights blinking ) if your phone bluetooth is ON. look your earbuds name..
Very nice VDO for simple construction details. The USB charging wire will supply 5 volt to the bluetooth earbud. The Li-ion cell of the bud has a voltage range 3.7 to 4.2 V. Don't you think that the charging voltage at 5 V is dangerously high for the health of the Li-ion cell. There is no current limitation arrangement for safe charging. Any comments please!
@lienchen12 Thanks for your irrelevant response of suggesting another VDO to correct the errors of this VDO. Well, if you agree that 5volt supply to earbud's battery is an error, which will explode the earbud, please suggest all viewers of this VDO to modify the circuit so as to reduce 5 volt to 4.1-4.2 volt for safe charging. Kindly provide the link of the referred VDO for control charging.
@@madhusudangupta3661 you are wrong earbuds charging supply is 5 volts, maybe you don't know how to use digital multi-tester, if reduce 5 volts to 4 volts, it will not charge your earbuds, your conclusion is very wrong.
@@lienchen12 May be you are right! The earbud does not contain any voltage control circuit board (BMS, from 5 Volt to 3.7-4.2 Volt like 4056). A micro Li-ion battery is fitted with a 16 ohm - 32 ohm Speaker and a Bluetooth cum Low Power amplifier in each earbud casing. If, there was any BMS between the Battery and the contact points on the earbud, the voltage of the battery will not reflect at the contact points. The BMS is fitted in the Charging case of the earbuds.
i know the li-ion cell battery is 3.7 volts but when the 3.7 volts connected to the charge control board it converted into 5 volts to charge the earbuds and when you to test using digital multi-meter to the charging pin ( the left and right pin that connected to the board ) of earbuds it shows 5 volts. Don't worry, just use charge controller board of any earbuds, it is safe..
Here’s a good question how do I make my old phone charger case work for my other headphones that will charge same way they just can’t fit in the box the charging box
brother i have a tip for you, put ( diode 1N4007 ) on positive wire and diode positive to earbuds positive to prevent over charge, i have tutorial for that, soon to upload..
Great little solution but it could have been summarized and explained or edited into a much shorter video and I wouldn't have felt like bashing my head into a wall due to that terrible 6 second repetatively looped song clip...
Question:Can we use regular USB cable instead of that charger you had used? Question: Shouldering is necessary, can't we do apply the copper strings directly?
hey man, so my sony earbuds have 3 magnet slots for charging and I have cut wires from an old usb cable and have green black and red and black i placed in the middle red and green on first and third. But whats interesting is that one way there is red for charging but If I change the green and the red one earbuds turn off. And if do it again they turn on and I can hear the sound power on. Is that safe? Am I safe as long as I dont mix up the black wire with any other?
bro you have to test the terminal to know where is the positive and negative ( use digital multimeter ) On USB wire, red is positive and black is negative, ignore the green wire
@@lienchen12 Yeaah you are right I just tested it and it turns out the midle one is - and the other is postive and when I changed from negative to positive it showed me negative on the device just like on your video so I think I know which one is which. Thanks anyways.
Hey bro are you trying to charge your sony wf-1000xm4 ear buds? I lost the case so i'm trying to find a way to charge them. The only difference here is that my ear buds have 3 metal points to charge the ear bud. in this video there is only 2. Also my ear buds require usb-c connection, so should I use a usb-c cable? You should make a video for this! Thank you so much.
@@WristSociety I couldn't do any other way so far other than putting the wires and waiting for it to charge i tried different things but couldn't come up with anything. You can do it with any old cable +. - find where to put them on your earbud sou you can charge them up.
I have a freebuds 4 I from huawei and it have only one charging terminal at the bottom how to charge it can you please tell me or make a video for it and thanks for advance
freebuds 4i is wireless charging, if lost case try usb wire inside has 2 wires ( red and black ) try to connect red wire to charging terminal and see if charging light will goes ON
Bruh as your eapbuds has 2 terminals /2 charging holes (+ve & -ve ) my earbuds has 3 terminals / charging holes...so will it charge by this trick ???plz help me out bro
@@lienchen12 bro i can't find the terminal connector here in india easily on amazon and hereby, so can u plz suggest the exact name /another name for the device .
Awesome, it works! Thank you so much. THIS is what TH-cam is for
your welcome...❤
@@lienchen12 kolim
Olkplo
Thanks a lot sir ..... my galaxy buds live case I have lost but watch your video and my buds successfully charged
Thanks a lot
From 🇮🇳
you're very welcome ❤
Hi Lien Chan thank you for making this video simple and easy,thank you again for making life that little bit simpler.
@@shahzadchoudhary3845 ur welcome thanks
LOVE THIS!!!! You kill me with this! I have two pairs of earbuds that need a good case. Thank you!
watch my new other video, because i use charge controller
Thank you so much you did a very good demonstration even without talking 🇺🇸
you're very welcome
I come here again to thank you alot dear Mr lian
I managed to make it work and it's only because of you
May you find happiness in your life 😁😁
thank you so much friend, i really appreciate that❤
True hero. I my headphones are charging proper now without a case. Thank you so much!
you're welcome my friend
Hi! I absolutely have to try to do this later. You are the ONLY person offering help to those of us who have lost our charger cases. It appears your method works for ANY brand as well! Very nice! Are you using a magnet with that screw thing? I am totally oblivious at the moment and know I'm going to have to watch this a few times. I am currently skimming through (as my daughter is creating havoc with her juices and syrup...) And anything else she can use, taking from the fridge while I'm distracted!
If it is not too much to ask can you please respond with a list of the items you're using so I can get them together later?
Thank you so much regardless! I think I can do this!
1. small srew / you can use small magnet
2. usb wire / phone charger wire
3. speaker terminal connector / white plastic i inserted the 2 wire inside
4. digital multimeter / to locate the positive and negative
5. glue gun
earbuds has a magnet inside so i use screw, just careful to the polarity ( positive and negative ) thanks for watching..
@@lienchen12 how many volts did you use
@@Semih-t2n 5 volts
@@lienchen12 i like your project and i will try it for bluetooth earbuds i found on the ground
@@Semih-t2n yes you can try it
Brazil here!! thank you ! U save me
Please can i use this same prpcesa for my Jbl aiopoda
yes you can but use charge controller, just check my new upload for earbuds lost case
I'm at the stage of putting the wires through the terminal connector but i don't have one. Is there another way to attach the wires to the terminals of the earbud with stability?
you can use small solid plastic then the wire stick it with the glue gun
can i make it work without the terminal connector ?
i mean by just connecting the wire to the earbud terminals and holding it with whatever i can ?
yes you can, but you have to know the positive and negative terminal
Chaa gaya yaar
So useful idea for me
Actually i got samsung copied buds a gift and it's not working because box is not charge it
Alot love from pakistan
thank you for watching my friend..
i visit your channel keep it up..
This is legit, I tried it myself.
Thanks brother ❤️
thank you also bro, you're welcome
Hello Idol ang galing mo naman very creative madiskarte talaga ang pinoy. thanks for sharing!
thanks po..
You're a genius, wow. Thank you💙
Hi there! Great video, I'm trying to do the same for the sennheiser cx400, but they have 4 pins and I can't get it to work.. any recommendations? Thanks for the video
use digital multi-meter to locate the positive and negative terminal, try to test those 4 pins
@@lienchen12 Great! thanks again!
Hey I think my earpods are same I don't know how much energy need can I use ur method directly note earpods are same
all earbuds are 5 volts, use smart phone charger and follow my video tutorial
@@lienchen12 thank you so much
Do we need all those parts? I only ask because I'm currently homeless and it's hard to get a hold of certain things like the volt meter and the little piece you put the wire to
you need to locate the positive and negative or else it won't charge
Bro ye usb cable direct charger se connect Karin ya power Bank se karenge ya fir dono main hi laga sakte hain batana yar Mera Bluetooth ka case khogaya ???
bro i can't understand your language, can you comment english thanks
I have jbl reflect flow mini nc that have 3 terminals how do I do that
use digital multi-tester to find the positive + and negative -
This is awesome, can you also try making DIY charger case?
this is my new upload
th-cam.com/video/taEey_4Y5zE/w-d-xo.html
What about button you click it to connect to phone?
what do you mean
Button called multifunction button used to pair earbud with phone Bluetooth
@@mohamedreda-nn2kq let the earbuds full charge then power ON, earbuds automatically pairing ( lights blinking ) if your phone bluetooth is ON.
look your earbuds name..
Love from India ❤️ tnq bro
you're welcome brother
Very nice VDO for simple construction details.
The USB charging wire will supply 5 volt to the bluetooth earbud. The Li-ion cell of the bud has a voltage range 3.7 to 4.2 V. Don't you think that the charging voltage at 5 V is dangerously high for the health of the Li-ion cell. There is no current limitation arrangement for safe charging. Any comments please!
you can watch my other latest video, my new videos will tell you and will answer your explanation, my new videos i use charge controller
@lienchen12 Thanks for your irrelevant response of suggesting another VDO to correct the errors of this VDO. Well, if you agree that 5volt supply to earbud's battery is an error, which will explode the earbud, please suggest all viewers of this VDO to modify the circuit so as to reduce 5 volt to 4.1-4.2 volt for safe charging.
Kindly provide the link of the referred VDO for control charging.
@@madhusudangupta3661 you are wrong earbuds charging supply is 5 volts, maybe you don't know how to use digital multi-tester, if reduce 5 volts to 4 volts, it will not charge your earbuds, your conclusion is very wrong.
@@lienchen12 May be you are right!
The earbud does not contain any voltage control circuit board (BMS, from 5 Volt to 3.7-4.2 Volt like 4056). A micro Li-ion battery is fitted with a 16 ohm - 32 ohm Speaker and a Bluetooth cum Low Power amplifier in each earbud casing. If, there was any BMS between the Battery and the contact points on the earbud, the voltage of the battery will not reflect at the contact points. The BMS is fitted in the Charging case of the earbuds.
i know the li-ion cell battery is 3.7 volts but when the 3.7 volts connected to the charge control board it converted into 5 volts to charge the earbuds and when you to test using digital multi-meter to the charging pin ( the left and right pin that connected to the board ) of earbuds it shows 5 volts. Don't worry, just use charge controller board of any earbuds, it is safe..
Here’s a good question how do I make my old phone charger case work for my other headphones that will charge same way they just can’t fit in the box the charging box
if your phone charger lost you have to charge the battery only
Hi brother i have loast my jabra earphone case but have samsung bud case can you suggest any suggestions? sorry for my english
all earbuds are 5 volts can be use to charge other earbuds
Smarty pants! Great video, thank u.
welcome
Hi, i have a sennheiser tw3 without case. Can i connnect a regular 5 volt charger directly to bud? Thanks.
earbuds case has a battery charge control for the new model, i will make a video for that
@@lienchen12 thanks.
@@sukrudellal208 welcome
th-cam.com/video/Q2A8vO0lFWU/w-d-xo.html
Brother in last time which object use for charging
what do you mean bro
Can you say me the instruments that you used in this vedio, I want to charge my earbuds of jbl
usb cable wire, terminal connector, 1 screw, digital multi-meter,
The cable have 5v and the airpods need only 3v or less how much time deos it need to full charge
it depends on your earbuds indicator light, sometimes earbuds has a red light charging, full charge is green..
I love you brother you help me i am from India
brother i have a tip for you, put ( diode 1N4007 ) on positive wire and diode positive to earbuds positive to prevent over charge, i have tutorial for that, soon to upload..
Great little solution but it could have been summarized and explained or edited into a much shorter video and I wouldn't have felt like bashing my head into a wall due to that terrible 6 second repetatively looped song clip...
That repetitive song clip isn't nearly as bad when you change the speed to 1.75x or 2x. Just btw
I just stabbed my self in the ears I felt like I just didn't want them anymore after this clip. So I won't be needing this diy
Funny I was thinking the same thing , that stupid background music or sound 😖
you can mute the music, just easy like that, the important is my tutorial
After 19 hours watching this video it finnaly worked
Love you dost badhiya Banaya
Voltage difference nhi hoga jya direct chrging kare to
friend english please
Sir i have earbuds of skullcandy sesh evo and i have battery charger max how much amp accept by earbuds
usb 2.0 - 0.5 amps / usb 3.0 - 0.9 amps
Thanks bro...I don't have a voltmeter l, so I tested the earbuds with a led bulb to find the polarity....
wow that's great idea bro.. enjoy using your earbuds again, thanks for watching
How did you do with the led bulb?
Adaptor use or power Bank which one use for charging
you can use both
Thanks for that 👍 bro
@@mohdkhalid8718 you're welcome bro
What thing is that?
and what the white thing is called in which you have put in wires?
that's a terminal connector, usually use to connect power and speaker on pcb
So you just use 5V directly? Just to make sure, would not be fun to have a lithium battery popping in my ear😁
i have latest video uploaded, i use charge controller
Question:Can we use regular USB cable instead of that charger you had used?
Question: Shouldering is necessary, can't we do apply the copper strings directly?
yes you can use regular charger and copper string
just make sure the polarity to avoid battery damage
@@lienchen12 I do not have facilities for soldering, I'm going to attach the cable strings directly to that earbuds pin-point, will it work?
See @ 1:20 cable and earbuds are only 2 things we do have , we've nothing else.
@@kamalcad9710 yes but be sure there is lights ON, indicate its charging
hey man, so my sony earbuds have 3 magnet slots for charging and I have cut wires from an old usb cable and have green black and red and black i placed in the middle red and green on first and third. But whats interesting is that one way there is red for charging but If I change the green and the red one earbuds turn off. And if do it again they turn on and I can hear the sound power on. Is that safe? Am I safe as long as I dont mix up the black wire with any other?
bro you have to test the terminal to know where is the positive and negative ( use digital multimeter )
On USB wire, red is positive and black is negative, ignore the green wire
@@lienchen12 Yeaah you are right I just tested it and it turns out the midle one is - and the other is postive and when I changed from negative to positive it showed me negative on the device just like on your video so I think I know which one is which. Thanks anyways.
@@kornelobajdin5889 you're very welcome friend, thank you for watching
Hey bro are you trying to charge your sony wf-1000xm4 ear buds? I lost the case so i'm trying to find a way to charge them. The only difference here is that my ear buds have 3 metal points to charge the ear bud. in this video there is only 2. Also my ear buds require usb-c connection, so should I use a usb-c cable? You should make a video for this! Thank you so much.
@@WristSociety I couldn't do any other way so far other than putting the wires and waiting for it to charge i tried different things but couldn't come up with anything. You can do it with any old cable +. - find where to put them on your earbud sou you can charge them up.
Thank you..you did great✌🏻
Hi I saw this video a few days and it really helps...Can I ask a question?
Question: is it necessary for the charger to be thick or thin?
( thick or thin..? ") a little thicker wire much better
Okiee Thank you so much😁
You're a genius!
Great stuff.
my charger usb cable has 4 wires Green yellow red black which 2 should i use?
red is positive and black is negative, ignore the green and yellow wire
bro maine positive negative change kr diya....ab wo on v ni ho rha h....koi solution
english please
Sir mujhe chahiye ye
❤ love you man.... I found one when I was running I need a idea🔧
you're so lucky, thanks for watching
What sort of terminal connector have you used? Any specific type that I should look for in a shop?
6471-03 PBT GF 10 2 pin plastic hole connector
thanks for watching
Nice lemme grab the tools I don’t have and I’ll be ready😐
i have more video tutorial, much easier to make
Hey i lost my boat airdopes 402 case and i cant use this video to make it plz make a video for that🥺
i'm making, don't worry...
uploading..
This is so smart but where can I buy a new charger separately?
try shopee apps, thanks for watching
Can I use any type off charger
yes, be careful to the positive and negative
Boult z10 ka charger kaise banaye
english please
Bro please put for OnePlus airpord z pls bro....
i don't have one plus buds but you can try my tutorial
Cool bananas mate, much love
Nagawa ko narin salamat idol keep safe poh
Thank you simply brilliant and pretty useful 👌🏻
How can i get to know which terminal is positive and which one is negative without that device which u have used??
if not charging..then switch it, thanks for watching
Thank you sa sharing nagka idea ako#cyprus phil
Can I buy one from you???!!!!
i’m far from your country, you can do it by yourself..
Where you connected this cable?
you can connect to computer usb, smart phone charger
How to know which terminal is positive or negative
on smart phone charger when you open the wire there"s red and black, red is positive and black is negative
@@lienchen12 thanks + new subscriber
I have a freebuds 4 I from huawei and it have only one charging terminal at the bottom how to charge it can you please tell me or make a video for it and thanks for advance
freebuds 4i is wireless charging, if lost case try usb wire inside has 2 wires ( red and black ) try to connect red wire to charging terminal and see if charging light will goes ON
That's straight from the charger with nothing attached to the wire without any soldering right
@@MyTHEDARKSTAR yes
Thanks you man much love to you
@@MyTHEDARKSTAR you're welcome friend
Is this also work for noise shots earbuds
first you have to check the voltage of earbuds, if earbuds has 3 to 4 volts then you can follow my vid tutorial, thanks for watching..
Voltage is 3.2
@@sujitdubey5161 that's good then follow my tutorial just be careful to the polarity
@@lienchen12 polarity ?
@@lienchen12 ok thank you, I will try.
sir mera nhi ho rha h ptron ka hai kya kru
sir please english
sir my earbads ptron no charging help me
@@hayatsinghhayatsingh9515 sometimes earbuds battery need to change,
Thank you chaina brother 🙏👌😸
welcome
Plzz make a video for boat airdopes 402
do you have airdopes 402, what's the problem
I lost my case 😭
And boat airdopes 402 case is very different from the charging point you made so please 🥺 make a video for it 😭
@@valorantclips801 ok i"ll make a video
Oh my god thank you so much
Terminal connector kaha milega
What if the earbud has 3 pins?
use digital multi-tester to locate the positive and negative terminal
Super👍
Да уберите музыку нехрена не слышно🤯
english pls.
Good job
Bro my galaxy live buds have not Any light . So how can I know that charging is working fine ?
locate the positive and negative charging terminal
Thank you ❤
you're welcome
Price bta do
what do you mean
@@lienchen12 buy Krna hai mujhe ye charger
@@dineshbeniwal319 friend please write in proper english, so i can understand
@@lienchen12 i want to buy this charger
@@dineshbeniwal319 my friend you can do it by yourself just follow my video tutorial
Is there any way to find out positive or negative or do this without that tester you have
hi, you have to test it using digital multi-tester , you can buy the cheaper one to avoid damaging your earbuds..
Gagana po ba sa realme buds air 2
gagana po basta tama ang polarity at voltage
My wire has 1 red 1 white 1 black and 1 green wire what do i do
Red y + and black is - white and green are data wires, you can cut them.
You r my hero !
This technique can be used in any Bluetooth ear buds??
yes but you have to be careful to the polarity ( positive and negative ) to avoid battery damage, thanks for watching friend
thank you for this kind of idea, great works!
Bruh as your eapbuds has 2 terminals /2 charging holes (+ve & -ve ) my earbuds has 3 terminals / charging holes...so will it charge by this trick ???plz help me out bro
may i know what brand, you need to use digital multi-tester to find the +ve and -ve
Its boat airdopes 441
@@harshkori8154 use digital multi-tester to find the +ve and -ve
@@lienchen12 bro i can't find the terminal connector here in india easily on amazon and hereby, so can u plz suggest the exact name /another name for the device .
www.google.com/search?q=2%20pin%20wire%20to%20board%20connector&tbm=isch&hl=en&sa=X&ved=0CB8QtI8BKABqFwoTCODH2ory0_kCFQAAAAAdAAAAABAP&biw=1692&bih=869#imgrc=20ewmei-IeSjhM
Bro that white socket name
6471-03 PBT GF 10 (2 pin plastic hole connector)
you can search it on the internet or you can buy it on SHOPEE APPS, thanks for watching
OnePlus buds pro ke bare me bata de Bhai case gum gaya buds hey 🥲🥲🥲
english please
@@lienchen12 i have lost OnePlus buds pro case what should i do now 🥲
Same aise hi banao par usme do wire aur jod do +me + aur -me- dekh ke lagana ho jayega
@@Nonnoniqb you have to make a diy charger like i did
@@lienchen12 will it be similar or need to make different one! I M confused and worried could you help me ? Like how to make one for OnePlus buds pro?
Thank for this interesting video 👍🙏
Macgiver
wow very nice idea
thanks for watching
Super 😁
Nice and Awesome tutorial
thank you for watching Miss beautiful lady
Good job but ......So difficult for me
just follow my video
I am waiting for any senior out there
i reply your comment my friend, thank you for watching
請問白色的基座叫甚麼名字？
端子连接器, 感谢收看
@@lienchen12 thank you very much!
@@Chaksanqq you're welcome..
They need to stop making proprietary charging for each model and standardise.
I have losted my boose sports earbud case , one earbud I have but it's not charging ! What should I do😭😑??
if doesn't charging the problem is the battery inside