Thing turned out sick af! Without a doubt, the Palmers sure do know how to build a tight pitter with sum awesome mods an tons of power, keep it up boyz! Love the vids
Bad Ass. I just did 22 CRF110 all Pearl White Powder coat, White plastics and Custom Evel Knievel Graphics. Blue anodized Wheels. Still stock engine though. Lol. Came out pretty Wicked.
DNM shocks have different lengths. Dampening rods in the front raise it to match. Or the easier way is a shock spacer in the rear and a triple clamp in the front. Gives you between 1 and 1.5 inches
I ran an exhaust and intake tube no ecu tune. Bike was fine ran great. Although I will say throttle body/ intake and tune were the best mods I've done with CJR
I couldn't stop laughing...dude, I'd love being around you guys. I'm always losing bolts with my bikes...got a fully modified 19' TM Racing EN300ES 2 stroke, and just picked up a 22' CRF450R-S that will soon get sent to XPR Motorsports/Engines to get the factory treatment on the engine...gonna tune it for GPs, GNCCs, WORCS, & Sprint Enduros/Enduro GPs. Love the bike, and love the passion!!!! 💪
@@palmercompound2356 Hey, you guys are having fun and that is all that matters...I would love to share my factory machines with you once they are fully completed, and you can jump right in the van, and RIP with me all around the country!!! Saving up for a Mercedes-Benz Sprint van right now, as well as A kit suspension for the Honda & TM Racing machine. The TM is a very special bike (only ~30 other people have one in the USA, and the engine is just as gnarly as the CRF450R...for now...probably going to be a different story once those 58 ponies get put in place by a 62HP 450cc engine with more torque from XPR Motorsports lol). Love that build, and it sounds like my 450! hahaha You guys ROCK! I subbed just because of that vid, too! God bless, and ride safe, brother!
@@karlosmoreno3821 haha That's AWESOME! I love both of my bikes...but I'm not gonna lie...I think I like the 450 more because I haven't been on 4 strokes since my 16 YZ250FX! lol So it's still new to me...but I would never part with my TM Racing machine, because I've FULLY modified the engine from top to bottom, and it's a handful! haha VHM head with MX 28mL insert, Smart Carb 2, Pro X double ringed racing piston, Pro Circuit expansion chamber & silencer, V Force Reeds come stock, but I've got a billet aluminum reed extender for it for more bottom end, it comes with a factory hand-finished cylinder head port & polish as well as a very nice Emoticon ECU/mapping system with map/mode selector switch...it's every bit faster than my stock 450 right now...but when I finish paying XPR Engines and they finish it...it will have no chance cause it's getting the motoconcepts Honda Factory treatment. lol -But SMOOTH and FAST power. lol ...I've fell enough times pinning it in 4th for cross country training, and thank God I never came out with more than a bruise! 🙃 I PRAY every time before riding! haha Come on over to North Carolina and ride em with me! lmbo ...I do plan on riding and racing in Texas later too. If you see a tattooed red haired heavyweight fighter looking guy with a TM & Honda, come on over and give er a rip! lol
How do you like that trex throttle tube? I am thinking about buying but not sure how it’ll effect doing wheelies. You think it’ll make a difference (good or bad)?
How was your chain not hitting the faster mini sprocket guard I did the suspension upgrades on my CRF 110 and after I left at the rare in the front my chain hits the guard
bike looks awesome! I think it would be a good idea to put a skid plate on it though. Ive just had put a new crankcase on my 110 because a rock cracked it.
You have 24mm Throttle Body 26/22 CNC Manifold - aRacer RCM5 for CRF110F ??.. for more Power with stock motor oh what y have for more power with stock Motor
Great job fellas this bike is cleann! Huge inspiration for my next build. Just picked up a 22 crf110 that’s getting the works. Question for you, what tires you guys running? I have a set of mx33s and am not sold on how skinny the front is. Are you still running the stock set or is that a different tread pattern? Appreciate it thanks for the videos
Why did it stop running on the show with the Honda e bike comparison? I have a drz110 that never ran again. Figured it was the black box or the stator. By the time I tried to fix it my son outgrew it.
I pray that when my kids have the luxury of having all of these things… That they realize just how special it is
never seen a channel grow so fast. so fun to watch y’all’s progress
Appreciate that brotha!
“Pitterbuild” so good build
This is so amazing! love from AUS! Can't wait to build one in West AUS
Yes! I’m from same place🇦🇺
Thing turned out sick af! Without a doubt, the Palmers sure do know how to build a tight pitter with sum awesome mods an tons of power, keep it up boyz! Love the vids
Let’s go!! Appreciate it bro !
Dude that thing is a dream bike you guys should build a crf 50 next that would be awesome
Thank you and yes that Would be rad!
Pitter Build! Turned out fire! 🔥Love the wheels and forks and the red accent parts. 👌
Let’s go!!
Sick 110! That Fox helmet was sick af too!
🤝
Txs bro always a pleasure Let's Goooo
🤜🤛
Looks awesome! Maybe get the skid plate and frame cradle for it.
🙌
hey guys, i’m new to dirtbike, just got an 04 crf100f, im just wondering, why’s your head sideways and mines vertical?
Do you guys know where that pipe is from, i would love to buy one
Bad Ass. I just did 22 CRF110 all Pearl White Powder coat, White plastics and Custom Evel Knievel Graphics. Blue anodized Wheels. Still stock engine though. Lol. Came out pretty Wicked.
Did you guys add anything to make the 110 taller? Looks amazing!
Prolly a tall seat
Nope it’s a stock seat… the new forks and rear shock most likely raised it up a couple inches
DNM shocks have different lengths. Dampening rods in the front raise it to match. Or the easier way is a shock spacer in the rear and a triple clamp in the front. Gives you between 1 and 1.5 inches
Coming in a little late but that thing looks 🔥🔥🔥. Nice work boys
Most underrated TH-camr
Amen
your bike is rad af I'm gonna mod mine soon bro
How did u fix the leaking engine cover?
That’s bad ass where do you guys get your tires from? I just pick me up a 2024 CRF 110
Pitter build baby!!!
How did he powder coat the wheels did he take them apart or just powdered everything together
Just took bearings out
@@palmercompound2356 did you sand blast it or anything
Are you running the stock map? Just curious if I can do a exhaust without sending my ecu to CJR
I ran an exhaust and intake tube no ecu tune. Bike was fine ran great.
Although I will say throttle body/ intake and tune were the best mods I've done with CJR
What does the bump start kit do?
Electric start in gear! Pretty neat
Cleanest pitter in the game rn awarded to u sir
Appreciate it !
Faster-minis the goat
Great pitter build
🤜🤛
Do you add on a dyno jet tuner for the DBK
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
Lesssssgo 🤙 weapon
Ayyy!!
Pitter build 🐐
I couldn't stop laughing...dude, I'd love being around you guys. I'm always losing bolts with my bikes...got a fully modified 19' TM Racing EN300ES 2 stroke, and just picked up a 22' CRF450R-S that will soon get sent to XPR Motorsports/Engines to get the factory treatment on the engine...gonna tune it for GPs, GNCCs, WORCS, & Sprint Enduros/Enduro GPs.
Love the bike, and love the passion!!!! 💪
We are not mechanic’s😂
@@palmercompound2356 Hey, you guys are having fun and that is all that matters...I would love to share my factory machines with you once they are fully completed, and you can jump right in the van, and RIP with me all around the country!!! Saving up for a Mercedes-Benz Sprint van right now, as well as A kit suspension for the Honda & TM Racing machine. The TM is a very special bike (only ~30 other people have one in the USA, and the engine is just as gnarly as the CRF450R...for now...probably going to be a different story once those 58 ponies get put in place by a 62HP 450cc engine with more torque from XPR Motorsports lol).
Love that build, and it sounds like my 450! hahaha You guys ROCK! I subbed just because of that vid, too! God bless, and ride safe, brother!
@@jonathondavis170 I’ve seen about 3 newer tm 2 strokes in south texas at a random track in the middle of no where
@@karlosmoreno3821 haha That's AWESOME! I love both of my bikes...but I'm not gonna lie...I think I like the 450 more because I haven't been on 4 strokes since my 16 YZ250FX! lol So it's still new to me...but I would never part with my TM Racing machine, because I've FULLY modified the engine from top to bottom, and it's a handful! haha VHM head with MX 28mL insert, Smart Carb 2, Pro X double ringed racing piston, Pro Circuit expansion chamber & silencer, V Force Reeds come stock, but I've got a billet aluminum reed extender for it for more bottom end, it comes with a factory hand-finished cylinder head port & polish as well as a very nice Emoticon ECU/mapping system with map/mode selector switch...it's every bit faster than my stock 450 right now...but when I finish paying XPR Engines and they finish it...it will have no chance cause it's getting the motoconcepts Honda Factory treatment. lol -But SMOOTH and FAST power. lol ...I've fell enough times pinning it in 4th for cross country training, and thank God I never came out with more than a bruise! 🙃 I PRAY every time before riding! haha Come on over to North Carolina and ride em with me! lmbo
...I do plan on riding and racing in Texas later too. If you see a tattooed red haired heavyweight fighter looking guy with a TM & Honda, come on over and give er a rip! lol
How do you get the stealth bar pad to fit on those bars
Lil tight but it fits
@@palmercompound2356 thank you dope pit bike love to see murdered out plastics and graphics with red number
What’s the bump start thing? Never heard of that? What dose it do??
You can bump start super easy and start bike in gear
@@palmercompound2356 that’s pretty gangster there
Cute jumps too btw
How do you like that trex throttle tube? I am thinking about buying but not sure how it’ll effect doing wheelies. You think it’ll make a difference (good or bad)?
Not worth it😂
Dude, where did you buy the dirt tricks sprocket for the crf110
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
Tmr throttle on a 2 stroke ? I might need to trick that lol
Get a cradle 🤘🏻 she looks killer
How was your chain not hitting the faster mini sprocket guard I did the suspension upgrades on my CRF 110 and after I left at the rare in the front my chain hits the guard
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
What size sprockets do yall use?
what handle bars are those i know they are rental but what bend
611
What if you put a big bore kit on it?
how do you do that at minute 12:47
crazy video man, currently tryna ask for a bike again, wish me luck. it’ll be my first bike hopefully
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
What a build, damn!!! how many tooth are u riding with on your sprocket?
38
E bike vs pitter vid would be sick
#PITTERBUILD That honestly blows! Super nice touch KP..
How much did the powder coating cost
350
@@palmercompound2356 well damn I might be doing that lol
bike looks awesome! I think it would be a good idea to put a skid plate on it though. Ive just had put a new crankcase on my 110 because a rock cracked it.
Thank you! Yes most definitely need one, didn’t make it in time to put on! 🤙
PITTER BUILD! Nice bike what cradle are you guys using?
We don’t run those haha probably should
Are you guys running the bigger throttle body? And what tune are you running?
Throttle body and ecu
Build turned out sick. You guys been having more fun on the E bikes lately?
Ya e bikes are lit
Yeah it’s not motor work haters its a bigger throttle body and tune that doesn’t count as motor work😂 its a lil computer work 😂
Tech 😂
@@palmercompound2356 imagine motor work too thing would rip 🙌🏼
@@Jgfbmx not really those 110 etc aint nothing special
What state do you guys live in I was just wondering cuz it looks like ca. anyways the pit bike came out sick! And all the bolts are tite right 😂😂😂
Utah
What pipe is on the 110
Bills
That’s my dream crf 110
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
🔥🔥🔥
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
Pitter build
Did you do a flash tune like the 125
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
@@VoltedAdventures. What’s the prize?
@@worldstallestmidget Dm my contact
What mods where done to the motor?
None
Essa moto🛵 ia fazer muito sucesso no Brasil🇧🇷
Man U dudes put some ching in them pitters
Yeeeyeeee
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
I'd prefer any /all 110cc arch suspension switch to the BBR pro-comp swingarm and new shocker springs
I recently got a 21 crf110, thinking of doing mods, how much in mods did it cost?
its not cheap i have done some mods on my 21 crf125f and i think i gave around 1000-1500 dollars for it
To go big bore you need like 700-1000$
You have 24mm Throttle Body
26/22 CNC Manifold -
aRacer RCM5 for CRF110F
??.. for more
Power with stock motor oh what y have for more power with stock
Motor
How fast does it go
Taps out at 69 mph
Pitty 2 legitty
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
Great job fellas this bike is cleann! Huge inspiration for my next build. Just picked up a 22 crf110 that’s getting the works. Question for you, what tires you guys running? I have a set of mx33s and am not sold on how skinny the front is. Are you still running the stock set or is that a different tread pattern? Appreciate it thanks for the videos
Stock is all time!
@@palmercompound2356 thank you! I’ll have to throw the stockers back on and give it a go
Sickkkk I’m in the market for a pitter/play bike. Is the 125f a big wheel or small? I’m trying to pick between 125f or sur Ron
Small wheel if you go for the 125
What rear shock did you use?
Dnm
Thanks bro
@@palmercompound2356 250lb or 350lb?
@@sciolifilms 250
Why did it stop running on the show with the Honda e bike comparison?
I have a drz110 that never ran again. Figured it was the black box or the stator. By the time I tried to fix it my son outgrew it.
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
didn’t know a shift shaft brace was a case saver
Crazy to think an ebike is more expensive than a pitter
Right !
Use a key ring as makeshift cotter pin
i want a dirt bike so bad
Awesome build but the ktm bolt -5hp
😂🙌
What sprocket is that
Dirt tricks prototype
Instead of the little cotter pin put a lil nail just to hold the break off
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
How tall is Kyson?
What is the top speed?
69 mph or so
@@palmercompound2356 nice thx
@@palmercompound2356 also how fast can the fully modded 2022 crf125f go? From ur other vids
Ofc Kyson tried to zip tie them 😂😂
😂😂😂
Which t-rex model did you get? And did you use same throttle cable or buy a different one?(bike looks sick🔥!!!)
Stock cable
Why aren’t you guys running bbr swingarms anymore?
He don’t like it to long
When you started finding loose bolts 😂
Yes
😂
Constructive Criticism: White plastic would look so much better
🙌
You didn’t do one mod to the engine to increase power so why the title faster 110
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
Pitterbuild
pitter build
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
Needs graphices
I can’t even ride 110’s anymore I’m so used to the e bike the geometry is soo different 😂
Hahah I know right! I got to used to the e bike and forgot how to ride the 110 😂
E Bike class next race? 👀
Let’s go!
How the nickname for your brother loyd came about ?
So the big cheque is just a trophy and you also get an actual cheque to bank the $10k don't you? Need to get that check mounted somewhere nice....
Spent it on this build! Haha next step is to hang it up!
Panty dropper fasho
💥
if you want to make it faster really than you need to big bor it
👆Congratulations you have just been selected hit me up to claim your prize🎉!!
doooooooooooooonkeeeeeeeeeeeeee
Mines better
I agree the sur ron is clean
@@raystubbs8046 that and my 125 hahah
Do you like the 125 better than the 110
pitter build
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
Pitter build
👆Congratulations you have just been selected hit me up to claim your prize🎉!!.
Pitter build