Lunchbox 2.0 Gaming PC

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ย. 2024
  • Head to www.squarespac... to save 10% off your first purchase of a website or domain using code devynjohnston
    📸 Instagram - / devyn.johnston
    Check prices on Amazon:
    KXRORS G200: geni.us/FZfU
    Intel i5-13600K: geni.us/ei3V8
    RX 7900 XT: geni.us/GNOc0mb
    ASUS B760I: geni.us/p4lqSR
    Deepcool Assassin IV: geni.us/UpbHPsF
    32GB of DDR5-5600: geni.us/0SCm1
    FK120 Fans: geni.us/AvFQ3
    Corsair SF750: geni.us/CK3v
    Corsair RM850e: geni.us/cnvvNU
    Samsung 970 EVO: geni.us/OtxVw
    Alienware Ultra-wide OLED: geni.us/LSsErG
    Toolkit: geni.us/LIGeHF8
    🎥 CAMERA GEAR:
    Check prices on Amazon below:
    Sony A7 iii: geni.us/XtxN1
    Sony 28-70mm Lens: geni.us/0SK2
    Sony FE 20mm F1.8 G Lens: geni.us/rcXK
    When you buy through an affiliate link, I may receive a commission on the sale at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.

ความคิดเห็น • 252

  • @PeterBerisha
    @PeterBerisha 9 หลายเดือนก่อน +126

    I don't think I've ever seen a more perfectly small compact ITX PC build quite like the one you just built, and for some odd reason it's quite the pleassure for the eyes!

    • @Sphyxx
      @Sphyxx 9 หลายเดือนก่อน +3

      Optimum built even smaller and has a full liquid loop

    • @meamfighterjet
      @meamfighterjet 9 หลายเดือนก่อน +2

      @@Sphyxxand? thats a 5000 pc either parts you can’t even buy now

    • @Sphyxx
      @Sphyxx 9 หลายเดือนก่อน

      @@meamfighterjet well ofc you can buy cheaper parts, it just gives a general idea of how to build such a tiny pc

    • @meamfighterjet
      @meamfighterjet 9 หลายเดือนก่อน +3

      @@Sphyxx optimum defo good but this video is for a starkly different machine

  • @jolness1
    @jolness1 9 หลายเดือนก่อน +5

    SF750 is the GOAT of SFX units. Running a 4090 and 5800x3d and even if they both hit max power spikes at the same time I’m still under the nominal 750w, much less the 900W+ OPP trip point.

  • @phil_matic
    @phil_matic 9 หลายเดือนก่อน +68

    There's definitely something incredibly satisfying about putting a large air cooler into a tiny case. Using up all the space that is available is a great feeling

    • @Shini1984
      @Shini1984 9 หลายเดือนก่อน +4

      Yeah, it looks great when finished. But it's super hard to maintain. Like, you forgot to plug something in? Take it apart completely or you won't reach the connectors. So I prefer large cases with lots of room - they can have lots of fans spinning slowly and still provide enough airflow for good temps. And pieces are much easier to access. Like, replacing GPU needs only a few actions, no need to take it all apart.

    • @megadeth8592
      @megadeth8592 9 หลายเดือนก่อน +1

      its not as bad as you make it sound@@Shini1984

    • @step2058
      @step2058 8 หลายเดือนก่อน +6

      @@Shini1984of course but then you can’t carry it like a lunchbox

    • @MethEnFait
      @MethEnFait 8 หลายเดือนก่อน +6

      That’s what she said

    • @bidyo1365
      @bidyo1365 8 หลายเดือนก่อน

      @@MethEnFait

  • @josh4275
    @josh4275 9 หลายเดือนก่อน +25

    this is the kind of build Im after. I want a powerful gaming pc in the smallest package possible. well done, I love it.

    • @abelduran8146
      @abelduran8146 8 หลายเดือนก่อน +1

      Same here! Thank you!

    • @kamilolszewitz2935
      @kamilolszewitz2935 6 หลายเดือนก่อน

      gl with dust ;)

    • @Thereisnogodlmaoo
      @Thereisnogodlmaoo 5 หลายเดือนก่อน

      @@kamilolszewitz2935air purifier lol

  • @lucaschenJC
    @lucaschenJC 4 หลายเดือนก่อน +3

    Ch160 definitely got some inspirations from this case

  • @braydenbrock5283
    @braydenbrock5283 9 หลายเดือนก่อน +12

    Ive been introduced to ur vids about a week ago. Ive loved them all brother, they have inspired me to build my first mini ITX pc ! Ive learned they def aren't cheap but are so clean and mobile

  • @bogdan12275
    @bogdan12275 9 หลายเดือนก่อน +9

    Unreal production quality . It's shocking that you only have 51k subs. You deserve at least 1million subs !

  • @SpruceUp612
    @SpruceUp612 9 หลายเดือนก่อน +3

    I love how you gamble and try to squeeze all you can in that case. Worked out great and looks really cool. I did something similar with the $40 Cooler Master Q300L case, it was like a puzzle and had to be assembled in a particular order and I’m not even sure how I’d take it apart lol. I squeezed an AMD 6950xt, 6 case fans (4 of them are 140mm) and a 1000W power supply and two cpu fans. It also has a mount for an HDD in the cable side so I threw a 4TB in there. Fun times. Keep up the good work on this channel, I love the production and chill flow of these videos.

    • @jmal
      @jmal 8 หลายเดือนก่อน

      I liked his choices for the cooler and GPU; really pushing the case to its fullest potential.

  • @akdiddy666
    @akdiddy666 9 หลายเดือนก่อน +4

    WILD, I literally finished a very similar build recently. Same case, Scythe fans, 13600kf, ARC A750. I love SFF cases with a traditional GPU layout

  • @scooterfisch
    @scooterfisch 6 หลายเดือนก่อน +1

    Thank you for this inspiration! Build mine yesterday. Same case and cooler with an 7800x3d and 4070 ti Super. i love it. With litte tweaks here and there its quiet and the temps are far better than i thought under heavy load.

    • @DaveBenchmarks
      @DaveBenchmarks 6 หลายเดือนก่อน

      What motherboard did you decide to go with? How is the space between the back of the cooler and the rear of the case? I would assume almost flush finish.

    • @scooterfisch
      @scooterfisch 6 หลายเดือนก่อน +1

      ​@@DaveBenchmarks I got the Asus Strix B650E-I . There's really no space! You have to build the case around the board with the cooler on. And you have to be lucky that the heat pipes bended right (mine were not). Otherwise the cooler get pushed back to much by the case and produces an uneven pressure on the CPU. In this combination, is not an easy build, but its working :D

  • @theshakyproject2971
    @theshakyproject2971 9 หลายเดือนก่อน +8

    I absolutely love these cases and it drives me nuts they're not listed in PC Part Picker. Also, that air cooler looks amazing.

  • @Aryzzzx
    @Aryzzzx 9 หลายเดือนก่อน +5

    Honestly KXRORS is a solid choice for Lunch box type PC case. My personal Favorite is the KXRORS S400.

    • @EzaneeGires
      @EzaneeGires 9 หลายเดือนก่อน +1

      Yesss! That's my current case. S400 is so ideal

  • @jmal
    @jmal 9 หลายเดือนก่อน +1

    You have no idea how thrilled I am that this case is finally featured by an English-language TH-camr! I have this case myself and it's one of the best ones I've ever had! I love that it can accommodate huge tower coolers and mid-length, dual-slot GPUs.
    Mine is an all-AMD setup with a Ryzen 5 7600 and a reference Radeon RX 6800. I used a Thermalright Phantom Spirit 120 for the cooler and it's super overkill for 1080p, just the way I like it.
    I think an ATX PSU can still work in this build, but IMO shorter, more flexible cables, like the ones you get from stores like CableMod, should be used. The standard cables that come with ATX PSUs are just too long and take up lots of space. Like you, I put in an SFF PSU (Cooler Master V850 SFX Gold) to free up some space.

  • @Mike-ld8uy
    @Mike-ld8uy 6 หลายเดือนก่อน +1

    This is literally the perfect case. It fits the big air coolers. It fits a graphics card with no funny business. It can even take an ATX power supply! But is as tiny as it gets. Where is the expensive version of this case? Who is making it.

  • @Hargak
    @Hargak 8 หลายเดือนก่อน +1

    Cool case, last I recall lunchboxes were smaller.. But so was the Toyota Tundra.

  • @iswearnotme
    @iswearnotme 9 หลายเดือนก่อน +2

    I built a pc two weeks ago using this case based on one of your videos. Ryzen 5 5600x and a 6700xt, 32gb of memory and a 2 tb ssd. It works great! Gets a little warm, but nothing too bad.

    • @hatim.bahrain
      @hatim.bahrain 9 หลายเดือนก่อน +1

      Ryzen 5 6600X ??

    • @iswearnotme
      @iswearnotme 9 หลายเดือนก่อน +2

      @@hatim.bahrain 5600x, sorry! I’m bad at keeping the numbers straight. It was my first computer build, which goes to show how useful this guys videos are, since I was able to build is successfully in one attempt.

  • @supertiger2607
    @supertiger2607 9 หลายเดือนก่อน +4

    Awesome video! I swear I want to build a small build like that even though I already have a great build but these videos are so incredibly tempting

  • @dividion8102
    @dividion8102 9 หลายเดือนก่อน +7

    Beautiful build. I'm a big fan of the all-black aesthetic. The only change I'd make is using a 7800X3D, since I think it's worth the extra $80, especially when you're pairing it with a $1000 GPU.

  • @pokesmosh07
    @pokesmosh07 9 หลายเดือนก่อน +5

    you have a very similar style to Optimum Tech and I mean that fully as a compliment, you are both some of my favorite tech youtubers. Because of your previous Lunchbox video I'm going to do a build in the s400 for my friend. Great vids 👍

    • @Polymath2B
      @Polymath2B 9 หลายเดือนก่อน +3

      Optimum tech is probably the highest quality content I’ve seen on TH-cam. Considering someone being in a similar league is a huge compliment.

  • @adamhaziqsalleh
    @adamhaziqsalleh 9 หลายเดือนก่อน +1

    Keep em coming with these builds! Love what you are doing man 👌🏼

  • @kroganbaby6163
    @kroganbaby6163 9 หลายเดือนก่อน +4

    Another top video. Can you make a video on how you approach cable management? Your cable management always look beautiful no matter the case..

  • @toolie478
    @toolie478 9 หลายเดือนก่อน +1

    So clean this video makes me want to build my next build into an mitx

  • @MyMusicMyMicMyLife
    @MyMusicMyMicMyLife 9 หลายเดือนก่อน +3

    love your videos, good attention to detail! thanks keep it up!

  • @dazeja
    @dazeja 7 หลายเดือนก่อน +1

    Built this and I get the most compliments. I don’t know if it’s the cube look, the handle or what.

  • @Kaffarov97
    @Kaffarov97 9 หลายเดือนก่อน +1

    Appreciate another ITX case that can fit full size air coolers.

  • @MQhelper
    @MQhelper 8 หลายเดือนก่อน

    I know this is off topic, but I really like how this guy trims his stubble. It's neat, just like his builds.

  • @DevilDocPlays
    @DevilDocPlays 6 หลายเดือนก่อน +2

    No way that gpu is 290mm. I couldn't get a 282mm to fit. Amd 6600 is 11.1 inches and that one is 11.42. So how does the shorter gpu not fit?

  • @tongoso
    @tongoso 9 หลายเดือนก่อน

    What a stealthy look, man you have such a great eye for these builds, simply amazing.

  • @Lucaemar
    @Lucaemar 6 หลายเดือนก่อน +2

    Must
    resist
    urge
    to replace
    my Sliger
    with this case

  • @theokra
    @theokra 9 หลายเดือนก่อน +3

    awesome build, also looking forward to an m1evo build!

  • @CrumblingLeech
    @CrumblingLeech 9 หลายเดือนก่อน +7

    Finally, an AMD build!

  • @hasvvathr7912
    @hasvvathr7912 9 หลายเดือนก่อน

    Your ITX PC builds are great! Keep doing these...

  • @jvcksonm8772
    @jvcksonm8772 9 หลายเดือนก่อน +1

    Pushing the limits on this one. I like it.

  • @EzaneeGires
    @EzaneeGires 9 หลายเดือนก่อน

    One note about these ITX cases with leather/faux leather handles, even if they are sturdy and support the total weight, it's better to put a hand under the case as well when carrying. The handle should be more to aid in lifting the case off the desk.

  • @TheGooseBruce
    @TheGooseBruce 9 หลายเดือนก่อน +1

    Seems awesome, I would buy one if they made a limo edition to fit just slightly bigger GPUs... +1 slot and +1 inch length.

  • @matiasspesot7884
    @matiasspesot7884 5 หลายเดือนก่อน

    Is this a case and cooler combo? Keep seing those everywhere☠️

  • @DanteRatto
    @DanteRatto 9 หลายเดือนก่อน +2

    I'd like this case a lot more if they inverted it and put the GPU on the top.

    • @jmal
      @jmal 8 หลายเดือนก่อน

      You might want to look into the Silverstone SUGO 16 for that.

    • @DanteRatto
      @DanteRatto 8 หลายเดือนก่อน +1

      @@jmal Doesn't hold nearly big enough graphic cards for 2024.

    • @jmal
      @jmal 8 หลายเดือนก่อน

      @@DanteRatto Unfortunately, yeah.

  • @v4714v
    @v4714v 9 หลายเดือนก่อน +1

    This man as a full five-course meal in his lunchboxes

  • @EdwinCHolley
    @EdwinCHolley 6 วันที่ผ่านมา

    When someone says lunchbox pc I think of something luggable with a built in screen. I would call this a luggable. There is also another type that is a lunchbox with a router attached.

  • @herrausragend4537
    @herrausragend4537 9 หลายเดือนก่อน +1

    that looks amazing!! thumbs up!

  • @TapMyButtons
    @TapMyButtons 9 หลายเดือนก่อน +1

    Daaaamn I need this in my living room 👀

  • @mellymoo_eats
    @mellymoo_eats 9 หลายเดือนก่อน

    I used to have a Shuttle PC back in the early mid 2000, seems fairly the same but smaller in height

  • @CosmicNewbie
    @CosmicNewbie 5 หลายเดือนก่อน

    It's basically a negative air flow case and the CPU cooler sucks air from the side panel.

  • @canvargun
    @canvargun 9 หลายเดือนก่อน +1

    thanks for this build

  • @Grommet2007
    @Grommet2007 9 หลายเดือนก่อน

    I'd love to see a build that's geared specifically towards ensuring that dust does not collect in the case. These open mesh PCs look like dust magnets to me, and where I live, on the windy side of a small island facing the Atlantic Ocean, dust collection = salt collection = corrosion = eventually dead electronics. Years ago I lost my first PC within six months of moving here. I wised up after that and now use an external filter along with PC builds that use cases with built-in filtering. And still, some dust manages to get through into the case, grr....

  • @wangzig9800
    @wangzig9800 4 หลายเดือนก่อน

    too hot in that box. there must be a better way for air ventilation, a better way for air cooling the whole content. but it would be a dream come true for every pc user, to get a compact PC with much powerful CPU and GPU. Thanks for that video.

  • @ryans3199
    @ryans3199 8 หลายเดือนก่อน

    I know it's a bit bigger and doesn't have a carrying handle, but I'm really quite a fanboy of the CoolerMaster NR200P. I think it's friendlier to the GPU, especially since it can accommodate some absolute BEEFCAKE cards, such as the Sapphire Nitro+ 7900XTX, the fan shroud might only have about 2mm to the bottom of the case and maybe a whole 5mm to the front, but she purrs like a kitten with temps like 65c at most. The trick, IMO,-- and frankly with any other case where the GPU fan shroud is facing the floor-- is having those fans at the top pulling air up through the case and exhausting out the top. They're just superb at getting rid of stagnant hot air inside so even if the GPU fans don't have the best flow, it's fine because what it's generating is being whisked away. And then my CPU is fed from the back (7900X with the Noctua NH-D12L), so that peaks at only like 75c.

  • @guidomagni6948
    @guidomagni6948 7 หลายเดือนก่อน +1

    i need the s450 and s400 itx builds pls

  • @justeddm
    @justeddm 9 หลายเดือนก่อน +1

    Shiny snake cases are lit , though rare 😞

  • @findmi2708
    @findmi2708 9 หลายเดือนก่อน

    i dont know if this unit beats optimum mini itx build but man, still looks awesome

  • @gerardbarroso389
    @gerardbarroso389 6 หลายเดือนก่อน +1

    Nicee review! If 290mm works but not perfect, can it be pushed further? based on your experience would it be possible to cram a 300mm gpu in there? like 10mm more? Im hoping to cram a Proart 4070 TI if im gonna get a case like that..

    • @jmal
      @jmal 5 หลายเดือนก่อน

      Unfortunately, no. The largest GPU that you can fit is a reference 7900 XT, and even that is pushing it. If you want Nvidia, then the most powerful GeForce GPU you can fit is a 4070 Ti Super in either a Gigabyte Eagle/Windforce model or an Inno3D Super Twin, which will also allow you to add two 120mm slim fans at the bottom.

  • @LetsPlayakaNHP
    @LetsPlayakaNHP 9 หลายเดือนก่อน +2

    Nice Build

  • @miikemq
    @miikemq 9 หลายเดือนก่อน +1

    man i love that case

  • @Cyfix15
    @Cyfix15 7 หลายเดือนก่อน

    Really cool, i’ve been really interested in mini itx builds but worried about cooling for something like 7900x3d with anything other than a d15 or giant water cooler or what you have here.
    This looks like it could do the job

  • @jandkwhite6459
    @jandkwhite6459 9 หลายเดือนก่อน +1

    very nice. Just in case you didn't know the thermalright cpu contact frames lower cpu temps, lowered my 13900k 11c

    • @jmal
      @jmal 8 หลายเดือนก่อน

      Works with AM5 CPUs, too!

  • @BigMeep1
    @BigMeep1 7 หลายเดือนก่อน

    This pc is super clean. I was considering buying thw white version of that cooler but decided to just get a 360 mm aio.

  • @igorr5053
    @igorr5053 9 หลายเดือนก่อน

    Clean AF. Dig it!

  • @shoobadoo123
    @shoobadoo123 9 หลายเดือนก่อน +2

    Shiny 🐍

  • @dengodesign9511
    @dengodesign9511 9 หลายเดือนก่อน

    this is the perfect itx case so far

  • @MrRedPony01
    @MrRedPony01 9 หลายเดือนก่อน +1

    I just built one with that case. Lol. I was so mad because it said it would fit a ATX PSU. But it hit the GPU even though it was in spec.

    • @jmal
      @jmal 8 หลายเดือนก่อน

      Like you, I found out the hard way lol. Shorter, custom cables and a PSU length of 140mm will only work with this case.

    • @twentyjeans4234
      @twentyjeans4234 5 หลายเดือนก่อน

      I got a large cpu cooler a full 149mm ATX psu(non modular) and a 6700xt Challenger in it, but it does get hot

  • @kensg
    @kensg 9 หลายเดือนก่อน

    Very nice, I kept wondering how did you fit the heatsink! But it fit …close😉

  • @andKRM
    @andKRM 9 หลายเดือนก่อน +1

    What overlay is Devyn using when he shows up gameplay clips? I don't think it's MSI Afterburner.

  • @lachlanbowden1323
    @lachlanbowden1323 9 หลายเดือนก่อน

    Nice video & particularly like that you've shown temperatures of key components under various operating conditions. Do you mind me asking what environmental temperature was?

  • @seanirl7738
    @seanirl7738 9 หลายเดือนก่อน

    Awesome build!

  • @yuvrajchauhan5098
    @yuvrajchauhan5098 9 หลายเดือนก่อน

    Your channel is just amazing

  • @MoistSocks
    @MoistSocks 9 หลายเดือนก่อน +2

    Thats a big lunch box.

    • @dazeja
      @dazeja 8 หลายเดือนก่อน

      It’s more like a shoe box.

    • @jmal
      @jmal 8 หลายเดือนก่อน +1

      It's as large as my IRL lunchbox. I bring a lot of food to work, so sue me lol.

  • @KBnicoS
    @KBnicoS 6 หลายเดือนก่อน +1

    You said that you build a 7900XT into the case, which in reference design should be 276mm long. The 7900XTX is 287mm in reference. Im confused now because your 290mm-card looks like reference to me. Im about to buy the case but still struggling with the GPU choice.

    • @Z.FA89
      @Z.FA89 6 หลายเดือนก่อน +2

      In the video, he states he has a 7900 XT reference model from PowerColor. Checking dimensions on PowerColor's website, it is indeed 276.4mm in length. PowerColor also shows an additional dimension of 290mm length with a bracket, but as far as I can tell, he isn't using a bracket in the video. I wouldn't trust that this case can support any cards greater in length than the 276.4mm card he is using.

    • @KBnicoS
      @KBnicoS 6 หลายเดือนก่อน +1

      Good hint, thank you! I just checked their website and I guess they mean the pcie bracket. So if you measure up from the part of the pcie bracket which stands out of the case anyway, you get 290mm in length. I think you are absolutely right then that the max “real“ GPU length supported by this case is 275mm, as stated by the manufacturer.

    • @Z.FA89
      @Z.FA89 6 หลายเดือนก่อน +1

      @KBnicoS Hope you are able to decide on a GPU for the case now!

    • @KBnicoS
      @KBnicoS 6 หลายเดือนก่อน

      7900 XT if I still can buy one in reference design. If not ill go with the 4070 ti super.

    • @Z.FA89
      @Z.FA89 6 หลายเดือนก่อน +1

      @KBnicoS You can get the reference model directly from AMD's online shop :)

  • @poison557
    @poison557 9 หลายเดือนก่อน +1

    Isn't a reference 7900xt model only 276mm long?

    • @roshi1231
      @roshi1231 7 หลายเดือนก่อน

      This is correct. I tried this build with a 280mm and it does not fit. I hate this guy now. Kidding , but for real .. verify it next time so I don't torture myself wanting to force it to fit because "it's only 280mm and he fit 290mm".

  • @offenblende0078
    @offenblende0078 9 หลายเดือนก่อน

    great stuff ! please make an SSD NAS with this quality standard and size ! 👍

  • @UNIQUEGUY93
    @UNIQUEGUY93 9 หลายเดือนก่อน

    Beautiful! May I know what's the ambient temperature was like in your room when you measured these component temps?

  • @gucky4717
    @gucky4717 9 หลายเดือนก่อน

    GPU compability is okish... 275mm length, 2 slots width is somewhat limited this generation. Also >200€ for this case is A LOT. There are cheaper alternatives that are bigger and smaller.

  • @nghiatt4996
    @nghiatt4996 9 หลายเดือนก่อน +1

    Shiny snake G200

  • @pedrog4398
    @pedrog4398 9 หลายเดือนก่อน +1

    One of the best ITX builds to date! Reagrding ATX PSU length... is 160mm simply not doable or will it be very tight? I have a fully modular Corsair 750 PSu w/160mm length, Rtx FE 3070 and the Noctua nh-d15 cooler. Would like to reuse these comps with this case. thx

    • @jmal
      @jmal 8 หลายเดือนก่อน

      Unfortunately, 140mm is a hard limit for the PSU length for this case. You'll also want to use shorter, custom cables as well, as the standard cables that come with your PSU will take up too much space, and if you're not careful, put some pressure on your GPU (ask how I know 😖).

  • @aa65064
    @aa65064 9 หลายเดือนก่อน +1

    Bro has studied all the OT videos 😅

  • @Rigem.
    @Rigem. 5 หลายเดือนก่อน

    I want a solid version of this case with a window

    • @jmal
      @jmal 5 หลายเดือนก่อน

      That's only available on Chinese shopping websites like Taobao, unfortunately.

  • @Shoo8601
    @Shoo8601 9 หลายเดือนก่อน

    Nice build! Will you have a guide how to optimize the CPU with this motherboard? Like undervolt etc....

  • @m3lodeth
    @m3lodeth 9 หลายเดือนก่อน

    Great builds! If ever you're into it, maybe you can try building the smallest matx build?

    • @devyn.johnston
      @devyn.johnston  9 หลายเดือนก่อน +3

      I've actually been looking into that, so hopefully soon!

    • @DaveBenchmarks
      @DaveBenchmarks 9 หลายเดือนก่อน

      SKTC A10 would be a great candidate for that one!

  • @TristianWatson
    @TristianWatson 2 หลายเดือนก่อน

    would throwing a 96GB Kit (2x48GB) be dumb or a bad idea for this build if i want more of a workstation style?

  • @RefractArt
    @RefractArt 9 หลายเดือนก่อน

    Ma dude is like a Dr.Strange of computer cases.

  • @AndresGuerrero94
    @AndresGuerrero94 7 หลายเดือนก่อน

    What an amazing Video! cool build, I've been thinking about building an ITX gaming pc but I'm struggling trying to find a small pc case for a 7800 XT Sapphire Nitro +, do you have any recommendations? thank you! great video again.

  • @jennifersullivan6202
    @jennifersullivan6202 9 หลายเดือนก่อน

    Sweet build

  • @smarquez42
    @smarquez42 8 หลายเดือนก่อน

    For 89€, this case is a steal.

    • @furi0nblack363
      @furi0nblack363 7 หลายเดือนก่อน

      Where did you find it for 89 euros? I went to their site and it is still over 100 and requires shipment from the US :(

    • @smarquez42
      @smarquez42 7 หลายเดือนก่อน

      ​@@furi0nblack363On Amazon Spain, now it is at 99. The S300 is at 109 and the S400 at 119€, both of them with USB C but with 3.0 pcie riser cables.

  • @njbraun
    @njbraun 9 หลายเดือนก่อน

    That third cpu fan is most likely overkill and probably doesn't do much for thermals. Have you tried without it to compare?

  • @TheGooseBruce
    @TheGooseBruce 8 หลายเดือนก่อน

    Deepcool's new CH160 shown on CES seems to be fairly identical to the G200, but slightly bigger to take 3 slot and support slightly longer GPU's at 305mm. xD I hope that one can fit slightly longer GPU's than stated too, mine is 323mm... >_

  • @alexrahardjazh
    @alexrahardjazh 5 หลายเดือนก่อน

    Cool wiah one of this casing can ha dle 4070 ti auper cards. With amd either 7700 or 78003d or maybe 8700g

  • @ExcelQtr
    @ExcelQtr 9 หลายเดือนก่อน

    Which one is better or which one do you suggest S300 or This build?

  • @Brunark
    @Brunark 9 หลายเดือนก่อน +1

    This case looks like a good option for me for next PC, especially since I still find big air coolers really appealing looking, but at the same time want to downsize from my NR200P. Might be tempted to switch now if my 4070ti wasn't such a chonker and definitely wouldn't fit this.

  • @rahul875
    @rahul875 5 หลายเดือนก่อน +1

    Ch 160 build plz

  • @Ihearu864
    @Ihearu864 4 หลายเดือนก่อน

    Is it possible to attach a fan on the top with Assasin 4? Would you recommend attaching one?

  • @abelduran8146
    @abelduran8146 8 หลายเดือนก่อน

    I would also love to see a build with the acc x11 case from alie xpress

  • @MatthewMcMillion
    @MatthewMcMillion 9 หลายเดือนก่อน

    What kind of monster lunchbox are you people carrying around?

  • @sohelmahamudhridoy4618
    @sohelmahamudhridoy4618 8 หลายเดือนก่อน

    please make a video about Jonsbo c6 case with matx case & atx powersupply

  • @swordsinger1061
    @swordsinger1061 9 หลายเดือนก่อน

    Psst careful with RMe units from corsair, loud fan ;)

  • @cjstobe
    @cjstobe 9 หลายเดือนก่อน

    Hey man not tryna be rude but you never responded to my comment about the first lunchbox and i have question for that one. Would the stock cooler than comes with the 6700x work or no? Like would it fit still or do i have to use the low profile cooler like the one that you linked

  • @smarquez42
    @smarquez42 9 หลายเดือนก่อน +1

    Hello Devyn, merry christmas! Could u tell me if the handle is removable by any chance? it's the only thing i dont like about the case, since i will not use it a single time...

    • @jmal
      @jmal 8 หลายเดือนก่อน

      I have this case. The handles are secured by screws and is removable.

    • @smarquez42
      @smarquez42 8 หลายเดือนก่อน

      @@jmaldo they leave ugly holes in the top panel when removed?

    • @jmal
      @jmal 8 หลายเดือนก่อน

      @@smarquez42 It will leave noticeable screw holes, yes.

  • @zrmblk
    @zrmblk 9 หลายเดือนก่อน

    @Devyn Johnston Is it possible to build a 3D rendering workstation within a ITX case like the formd T v2 or an mITX like NXZT H1 V2? also what should be taken into consideration with such builds? The reason I am going for a SFF is beacuse I do nt want a large case and SFF has ease of portability

  • @DragonMan45100
    @DragonMan45100 9 หลายเดือนก่อน

    What does one Devyn Johnston do with all these compooters?

  • @Sphyxx
    @Sphyxx 9 หลายเดือนก่อน

    Instead of getting a Z series motherboard as upgrade spend the extra money on CPU rather itll pay of in the long run if intel goes too high price (as usual) get an AMD CPU you'll probably even get overclock capability and more performance than the i5 with the same price and use any extra money on RAM if enough left

  • @CakePC_Jake86
    @CakePC_Jake86 9 หลายเดือนก่อน

    damn you sir! i have my deepcool assassin iv sitting in the closet since building in the meshroom d last week, guess im rebuilding 🤣 sexiest black put build ive seen in a while!

  • @graelstream2353
    @graelstream2353 9 หลายเดือนก่อน +1

    For gaming and streaming on the same computer, would the 7800x3d be good or should I go for the 7950x non 3d version for more cores?

    • @jmal
      @jmal 8 หลายเดือนก่อน

      You're probably better off with the 7800X3D for your use case. The 7950X is best for productivity tasks, basically a budget Threadripper.