Great informative video. I tried the double sided adhesive sheets after watching your first video. Let me say, for me it is a game changer! So much better than using mod podge and paint. Thanks for sharing!
I have been searching for your initial video all day! Ohhhhh Myyyyy I am so happy I found this! My mom wants a Chevron Tumbler - and I had already bought the Elizabeth Craft Double-Sided Adhesive - but I could not find your initial video.
My main issue is getting the darn adhesive sheet to not have any wrinkles in it. I tried this once from one of your other videos. I'm going to have to try it again. Going to rewind the video a bit to find the place you purchase the sheets from and give those a shot. Thanks for your videos. When I do a search on here and you pop up, I go right to yours. 😊
Do you happen to have a video explaining the process of designing the design you want? I can’t figure out how and what I would remove from the image and clean it up. If that makes any since. Once it’s uploaded to the process before you hit the make it tab. My brain can’t seem to figure it out lol
I have purchased most of my templates... the only template I have made was the American flag template ... I have used the conture tool when I didn't want certain areas cut if that makes sense ...
If you rub/ press the glitters do you have to go in with a second layer using a adhesive glue? Does rubbing/ pressing prevent other colors from sticking onto previous colors? Really struggling with my colors contaminating each other! But I have not pressed like this..
Hi I go darkest to lightest making sure to rub in ... I use a dry brush and brush off the excess glitter before I start my next color ... I dont go in with a second coat ... some double sided adhesive tapes are stronger than others ... I like Elizabeth craft design or scrapbooking.com... I think they work the best
This is so flipping amazing!!!! I looked this up to buy some but the sheets or rolls but the rolls are 6in.x 27yd or 6x6 sheets, if your cup is say a 8x9 how does that fit if using the sheets. The roll you could turn the other way and cut it but you would have waste. Thank you for an awesome video.
Wow again no idea how I missed these questions... so sorry for such a delayed response ... try scrapbooking.com sheets ... minimal waste and most comparable ... lots of brands on the market now but still the only ones I stick to.
Not sure how I miss some questions sorry for such a delayed response ... I search etsy for templates... ellebeecreates.com has beautiful templates as well ... mostly I look for ones I think are beautiful or interesting... hope that helps!
This is so amazing! Thank you for sharing the video! I haven't started my first tumbler yet, but I'm going to have to try to add this method for sure!! Do you seal the glitter once you're all done glittering it, before you cover with resin? Thank you!
Thank you for sharing. I've used the DS Tape in the past. But I will definitely try the sheets. I'm on the website. But they're only selling 6" x 6" sheets. Where did you purchase the larger sheets? TIA
I do prefer glittering it when it's on the cup personally. I think you loose less glitter and that's how I started doing it. But it's been a long time since I have done one now and transfer tapes have come a long way.
Hi, thanks for this video. I’m just now getting into the double sided tape. Totally messed the first one up, but will try again after watching this. Do you mind telling me the pattern name for that purple, teal and bluish tumbler you made? You showed it after the 2 Pendleton design tumblers.
Thank you for this. I tried using the Silhouette brand and I couldn’t get it to cut. Ordering the other brand now. What setting do you use on your Cricut? 🥰
Silhouette brand I cut on paper plus the other brand cut nicely on washi .06 ... you could try a test cut in the corner of the double sided adhesive sheet also to see which setting works best for you
It comes with the template in a way because a square(rectangle) is placed around the entire template when you cut the top bottom and one side it should leave a small 1/4" strip on the left side ... I use the to start the pull
I tried this and found that when I pulled on the backing to remove it from the adhesive, it wanted to separate on the straight cuts that were on the other side. How do you keep the adhesive from pulling apart in those areas? The adhesive didn't want to release the backing without a fight.
Plz ,plz,plz tell me how to cut from cricut . My granddaughter usually does the cricut part and I do the hard stuff when I sublimate . I do t know how to use cricut . She is having such a hard time with this . She got the design off Etsy . She doesn’t know where to start . She’s confused about measurements and settings . Please help us
I dont know what brand or size cup your working with... but a standard 20 oz slim straight (makerflow) I cut at 9.18 x 8.125 on washi .06 setting ... hope this helps
I cannot find these sheets anywhere!!!! I live in ohio someone help me! I’ll even buy a pack off you personally using anything has been a nightmare! Any adhesive I use the sheets are thin and the corners come off when peeling the backing
Hi I have the template on my cricut and I cut it on washi .06 setting ... this cuts the top layer leaving the adhesive layer intact... I always say do a test cut as every machine and blade can have different wear to them. Paper+ has also worked for me.
Hello there!! I was curious if u could help me with measurements for the adhesive tape for a 16oz plump 20oz straight 24oz plump and 30oz skinny straight??? I would appreciate the help
I'm not sure on this ... I use a fabric tape measure to measure top bottom and height ... make a square with those dimensions cut it on card stock and wrap it around to see if it's good before using the adhesive sheet ... that's what I do anyways
www.etsy.com/listing/888300039/scales-svg-bundle-3d-scales-dragon?ref=yr_purchases I bought it over a year ago ... but found it in my purchases tab .... looks to still be available for purchase on etsy ;)
It looks like both Elizabeth craft design and scrapbooking.com is sold out right now ... those are the ones I prefer ... not a fan of the 3m brand or silhouette paper ... and tumblertape is sold out too (I have never tried that brand though)
WhT setting do you use on cricut?? I used double sided adhesive and it’s cutting through and through so each piece is individual all the do the backing and it’s a pain I don’t want to waste it all 😞
I use etsy, ellebee creates, for the stained glass I Google search stained class color sheets. I think I have been putting template links in the description for most videos. If there is a specific one you can't find let me know and I'll try and point you in the right direction
Try a test piece and play with your settings and pressure ... washi .06 works great for me ... but you blade life and material your using can make a difference
@@KotekTime the last one I cut looked ok but once I got it on the tumbler it over lapped and I couldn’t get it right afterwards practice makes perfect lol
Washi .06 works for me ... do a small test cut in the corner to make sure not to waste a page ... you want it to cur through the top but not the adhesive or the backing material.
I use Elizabeth craft design or scrapbooking.com double sided adhesive ... templates are from ellebee creates or etsy ... I use nailtape for my pinstripes...
Washi .06 ... do a small square test cut ... but washi. O6 has worked for me ... what brand double sided adhesive... some brands are way to thin to use
They sell it is 8 x 11 and a smaller size as well. You could lay two sheets and do your cut then lay them separately.... I dont have alot of orders for the larger cups so I haven't tried however I can test it out this weekend
@@KotekTime can I share your t Tips and tricks on double sided adhesive on EllebeeCreates FB page? Or can I direct people to this channel? Your video is the only one that shows how you actually do it. I cut mine in the wrong position (Silhouette) but so was still able to follow you. You have no idea how on hand how much I have wasted learning this. I usually don’t have trouble catching on to new things but this took me for a ride.
Thank you for taking the time to share this. You have beautiful tumblers! Thank you for sharing your work with us as well!
Thank you!!
Great informative video. I tried the double sided adhesive sheets after watching your first video. Let me say, for me it is a game changer! So much better than using mod podge and paint. Thanks for sharing!
Your so welcome
Thank you for taking the time to share your tips and tricks.
No problem!!
I love your tumblers and your videos. I am new to all of this. You do beautiful work!
Thank you!
Excellent explanation!
Thank you for sharing what you have learned - it is so very helpful 🥰
You are very welcome!!
I would love to see tutorials (beginning to end) of the tumblers. Especially the one that could be a Mardi Gras one
I have slowed down on my tutorials however if I have a template order I will try and remember to tape it!!
@@KotekTime thank you!
I have been searching for your initial video all day! Ohhhhh Myyyyy I am so happy I found this!
My mom wants a Chevron Tumbler - and I had already bought the Elizabeth Craft Double-Sided Adhesive - but I could not find your initial video.
Glad you were able to find it!!!! I have tried to update anything I have learned from making so many since my first post!
My main issue is getting the darn adhesive sheet to not have any wrinkles in it. I tried this once from one of your other videos. I'm going to have to try it again. Going to rewind the video a bit to find the place you purchase the sheets from and give those a shot. Thanks for your videos. When I do a search on here and you pop up, I go right to yours. 😊
Oh thank you ... its been awhile Tim to start posting more on here again!
Do you happen to have a video explaining the process of designing the design you want? I can’t figure out how and what I would remove from the image and clean it up. If that makes any since. Once it’s uploaded to the process before you hit the make it tab. My brain can’t seem to figure it out lol
I have purchased most of my templates... the only template I have made was the American flag template ... I have used the conture tool when I didn't want certain areas cut if that makes sense ...
Thank you so much for so much help and information!
You are very welcome!!!
THANK YOU FOR SHARING!!!
Are those 8x11 sheets you’re using?
If you rub/ press the glitters do you have to go in with a second layer using a adhesive glue? Does rubbing/ pressing prevent other colors from sticking onto previous colors? Really struggling with my colors contaminating each other! But I have not pressed like this..
Hi I go darkest to lightest making sure to rub in ... I use a dry brush and brush off the excess glitter before I start my next color ... I dont go in with a second coat ... some double sided adhesive tapes are stronger than others ... I like Elizabeth craft design or scrapbooking.com... I think they work the best
This is so flipping amazing!!!! I looked this up to buy some but the sheets or rolls but the rolls are 6in.x 27yd or 6x6 sheets, if your cup is say a 8x9 how does that fit if using the sheets. The roll you could turn the other way and cut it but you would have waste. Thank you for an awesome video.
Wow again no idea how I missed these questions... so sorry for such a delayed response ... try scrapbooking.com sheets ... minimal waste and most comparable ... lots of brands on the market now but still the only ones I stick to.
How do you get the designs for the double sided tape? Yours tumblers are so cute!
Not sure how I miss some questions sorry for such a delayed response ... I search etsy for templates... ellebeecreates.com has beautiful templates as well ... mostly I look for ones I think are beautiful or interesting... hope that helps!
This is so amazing! Thank you for sharing the video! I haven't started my first tumbler yet, but I'm going to have to try to add this method for sure!! Do you seal the glitter once you're all done glittering it, before you cover with resin? Thank you!
Yes ... once the entire cup is done I seal it with a coat of triple thick spray paint ... then I epoxy
Do you know of anyone who sells the wraps already cut? I don't have a cricut.
New to this , how do you get your cuts on it for your image?
Thank you for sharing. I've used the DS Tape in the past. But I will definitely try the sheets. I'm on the website. But they're only selling 6" x 6" sheets. Where did you purchase the larger sheets? TIA
www.scrapbook.com/store/uc-adh-1029-2.html .... this stuff is amazing and my go to great price also!
Do you think it is easier to glitter on the cup or before putting on the cup?
I do prefer glittering it when it's on the cup personally. I think you loose less glitter and that's how I started doing it. But it's been a long time since I have done one now and transfer tapes have come a long way.
Hi, thanks for this video. I’m just now getting into the double sided tape. Totally messed the first one up, but will try again after watching this. Do you mind telling me the pattern name for that purple, teal and bluish tumbler you made? You showed it after the 2 Pendleton design tumblers.
I believe that is the art deco template :)
What setting would I use for Cricut
Have you ever had to remove double sided tape from a tumbler? If so, how did you do it? 😣
What cut setting should I use on my Cricut explorer?
Did you get a answer on what setting I need to know that to I been you tube I can't find nothing
What brand did u use exaclty of the double sided adhesive
I started with Elizabeth craft design ... I use that still or scrapbooking.com brand ... both work great for me
Thank you for this. I tried using the Silhouette brand and I couldn’t get it to cut. Ordering the other brand now. What setting do you use on your Cricut? 🥰
Silhouette brand I cut on paper plus the other brand cut nicely on washi .06 ... you could try a test cut in the corner of the double sided adhesive sheet also to see which setting works best for you
The start line comes with template? Or do you create it?
It comes with the template in a way because a square(rectangle) is placed around the entire template when you cut the top bottom and one side it should leave a small 1/4" strip on the left side ... I use the to start the pull
@@KotekTime thank you so much attempting next week.
I bought some of this paper and wanted to be sure how you the design was it cut on cricut,and if so what side is up ?
Cricut - washi .06 setting - Elizabeth side up ...
@@KotekTime than you so much!
I went to go buy the adhesive that u recommend but it says it’s 6x6 on the website so do they have it bigger
They might be sold out of the larger size right now ...
I tried this and found that when I pulled on the backing to remove it from the adhesive, it wanted to separate on the straight cuts that were on the other side. How do you keep the adhesive from pulling apart in those areas? The adhesive didn't want to release the backing without a fight.
Did it cut too deep?? On the straight lines?? I haven't had that happen before??
Where do you get your Elizabeth sheets? Can’t find them on Amazon
I order from their website .. they were sold out last I checked ... scrapbooking.com is also basically the same :)
Plz ,plz,plz tell me how to cut from cricut . My granddaughter usually does the cricut part and I do the hard stuff when I sublimate . I do t know how to use cricut . She is having such a hard time with this . She got the design off Etsy . She doesn’t know where to start . She’s confused about measurements and settings . Please help us
I dont know what brand or size cup your working with... but a standard 20 oz slim straight (makerflow) I cut at 9.18 x 8.125 on washi .06 setting ... hope this helps
I cannot find these sheets anywhere!!!! I live in ohio someone help me! I’ll even buy a pack off you personally using anything has been a nightmare! Any adhesive I use the sheets are thin and the corners come off when peeling the backing
What is your email I will reach out to you to send you a pack that I have ...
How do it get it cut
Hi I have the template on my cricut and I cut it on washi .06 setting ... this cuts the top layer leaving the adhesive layer intact... I always say do a test cut as every machine and blade can have different wear to them. Paper+ has also worked for me.
Hello there!! I was curious if u could help me with measurements for the adhesive tape for a 16oz plump 20oz straight 24oz plump and 30oz skinny straight???
I would appreciate the help
I'm not sure on this ... I use a fabric tape measure to measure top bottom and height ... make a square with those dimensions cut it on card stock and wrap it around to see if it's good before using the adhesive sheet ... that's what I do anyways
@@KotekTime thank u I will try this !!!
Do you have a link for the snake skin svg?
www.etsy.com/listing/888300039/scales-svg-bundle-3d-scales-dragon?ref=yr_purchases
I bought it over a year ago ... but found it in my purchases tab .... looks to still be available for purchase on etsy ;)
How do you put the other color glitters on without it mixing on the parts you already did?
Rub your glitter in after pouring the glitter on, helps cover all the adhesive so no other colors stick. Start with the darker colors first
Where did you find the sheets? I can only find 6x6” sheets.
It looks like both Elizabeth craft design and scrapbooking.com is sold out right now ... those are the ones I prefer ... not a fan of the 3m brand or silhouette paper ... and tumblertape is sold out too (I have never tried that brand though)
@@KotekTime are you using 12x12 sheets or 6x6?
I use 8 1/2 by 11 ... I have used catscratch pads ... but I use those on the bigger cups ... I think I have a video up using it
c o o l
WhT setting do you use on cricut?? I used double sided adhesive and it’s cutting through and through so each piece is individual all the do the backing and it’s a pain I don’t want to waste it all 😞
Do a test cut try washi or paper+ ... which double sided adhesive are you using?
@@KotekTime the kind you are the Elizabeth one
@@KotekTime oh gosh I just tried washi and it worked!!! Thank you so so so much
Perfect!!!! So glad I could help!
How do you search for all the different patterns?
I use etsy, ellebee creates, for the stained glass I Google search stained class color sheets. I think I have been putting template links in the description for most videos. If there is a specific one you can't find let me know and I'll try and point you in the right direction
I’m doing something wrong I can’t get my templets to cut right
Try a test piece and play with your settings and pressure ... washi .06 works great for me ... but you blade life and material your using can make a difference
@@KotekTime the last one I cut looked ok but once I got it on the tumbler it over lapped and I couldn’t get it right afterwards practice makes perfect lol
@@KotekTime course it might be the material I’m using too I ordered different
What setting on a Cricut to cut the design?
Washi .06 works for me ... do a small test cut in the corner to make sure not to waste a page ... you want it to cur through the top but not the adhesive or the backing material.
what type of sheets r these i want to try them. is it paper side down or up
Elizabeth craft design double sided sheets ... brown side on the mat.
@@KotekTime does this mean brown side facing the mat so its faced down? want to make sure tks
Yes you put the brown side on the mat so the cuts are on the side that says Elizabeth craft design
Where can I get this product listing please
I use Elizabeth craft design or scrapbooking.com double sided adhesive ... templates are from ellebee creates or etsy ... I use nailtape for my pinstripes...
@@KotekTime thank you
Can someone please help me with the type of material to set my cricut on for double sided tape..its cutting all the way thru the tape
Washi .06 ... do a small square test cut ... but washi. O6 has worked for me ... what brand double sided adhesive... some brands are way to thin to use
Can you get that in a 12 x 12 sheets. I am trying to do 30 oz skinny and and oz from craft maker flo
They sell it is 8 x 11 and a smaller size as well. You could lay two sheets and do your cut then lay them separately.... I dont have alot of orders for the larger cups so I haven't tried however I can test it out this weekend
That would be great if you could. Also if you could do a video of piecing together on cup
@@karge1969 I will try it and video tape it ... no problem
Video is uploading of the big cup. I used a 35 oz
@@KotekTime can I share your t
Tips and tricks on double sided adhesive on EllebeeCreates FB page? Or can I direct people to this channel? Your video is the only one that shows how you actually do it. I cut mine in the wrong position (Silhouette) but so was still able to follow you. You have no idea how on hand how much I have wasted learning this. I usually don’t have trouble catching on to new things but this took me for a ride.
Link to buy the one u use???
Today
Today