Great how to vid. I'm 69 and installed a Curt to my '23 Rogue myself with the vehicle on the ground. I did not have remove those 2 push pins. Thank u for this very helpful production.
We film those separately. For a trailer wiring harness that's compatible with a 2023 Nissan Rogue, we recommend the # C44ER. We'll link you to the product description and an install video below. www.etrailer.com/Custom-Fit-Vehicle-Wiring/Nissan/Rogue/2023/C44ER.html www.etrailer.com/tv-install-trailer-wiring-2023-nissan-rogue-c44er.aspx
When installed, the etrailer # e93ZR will block the liftgate sensors under the center of the bumper, but if you wave your foot a few inches to the left or right of the hitch receiver, the sensors will work just fine and open the hatch. www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
Because the torque ratings can change over time, we don't specifically mention them in the install videos. The best place to get the torque ratings is the install instructions, which we've linked for you below: www.etrailer.com/instructions.aspx?pn=E93ZR
Nice hitch but in the video they install it on a lift. If you are doing it on the ground you will need a little extra room on the drivers side as the muffler is enough in the way to make it pretty danged hard. I jacked up the drivers side a few inches and that was enough room to install it. Like he says its heavy and awkward so its hard to install alone but it can be done as I did install mine by myself.
Great how to vid. I'm 69 and installed a Curt to my '23 Rogue myself with the vehicle on the ground. I did not have remove those 2 push pins. Thank u for this very helpful production.
You're very welcome, we're glad it helped! Congratulations on your successful install!!
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
Super nice info, thank you
Thank you very much, we appreciate it!
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
What about the electrical stuff?
We film those separately. For a trailer wiring harness that's compatible with a 2023 Nissan Rogue, we recommend the # C44ER. We'll link you to the product description and an install video below.
www.etrailer.com/Custom-Fit-Vehicle-Wiring/Nissan/Rogue/2023/C44ER.html
www.etrailer.com/tv-install-trailer-wiring-2023-nissan-rogue-c44er.aspx
Very nice information...
Awesome, we hope it was helpful!
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
Did you mention the rogue 3 cylinder turbo has a towing capacity of 1500 lbs.
We didn't, but you did! Thanks for mentioning that, we appreciate it.
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
Will the foot hatch release work with your hitch on the 2023 platinum rogue
When installed, the etrailer # e93ZR will block the liftgate sensors under the center of the bumper, but if you wave your foot a few inches to the left or right of the hitch receiver, the sensors will work just fine and open the hatch.
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
I have a Nissan Rogue 2024, the hitch is vibrating with the heat shield. Any tip, any suggestions that I can do or re do?
Did you figure this out?
@ I install a piece of hydraulic hose between the hitch and the heat shield. Problem solved!
Would this work on the 2025 Rock Creek?
The etrailer # e93ZR fits all models of the 2025 Rogue, including the Rock Creek trim.
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
what size socket is needed for the bolts?
Per the linked instructions, you'll need a 19mm socket.
www.etrailer.com/instructions.aspx?pn=E93ZR
What is the manufacturer's torque spec?
Because the torque ratings can change over time, we don't specifically mention them in the install videos. The best place to get the torque ratings is the install instructions, which we've linked for you below:
www.etrailer.com/instructions.aspx?pn=E93ZR
Nice hitch but in the video they install it on a lift. If you are doing it on the ground you will need a little extra room on the drivers side as the muffler is enough in the way to make it pretty danged hard. I jacked up the drivers side a few inches and that was enough room to install it. Like he says its heavy and awkward so its hard to install alone but it can be done as I did install mine by myself.
We're glad to hear that your installation was successful. Good job!
www.etrailer.com/Trailer-Hitch/etrailer/e93ZR.html
Fire the cameraman We couldn't see 💩. Redo the video showing where the weld nuts are!