FINALLY! After what, 37 years I know what may have been wrong with our GE 4 head vcr. We got it in around 1983-84? Sometimes you would put a tape in and it would moan and take off on a high speed play/scan. Then you would pause the unit and it would slow down and finally pause. Then it would be ok to press play. We never fixed it. In 1986, I bought the most reliable, vcr we ever had, a GE 4 head stereo vcr. It was used non stop. Had a really nice variable speed slow motion. I only used the best tapes. I miss that machine. I even remember part of the model# I wish I knew what it was...1VCR6015B OR something really close. Great job! I love your videos.
You are the most awesome kind of guy. None of my friends know anything about electronics. I'm watching this to get an idea of what to expect from mine, which is a PV-V4523S. I love your work! Thanks for the video.
Well done. I've not come across Deoxit D100 before, I may buy in some of that (but it's very expensive in the UK). Yes, Hall Effect sensors are forever failing on Sony Beta head drums, I've got good at replacing them without having to remove the lower drum / motor assembly.
Awesome job - I like to say that if people scream in how you do your job To bloody bad for them- Frankly they have no say in the matter | You are a credit to your profession - you trouble shoot - you found a solution and you fixed the problem. It is so neat to see things getting a second life and you are able to keep it out of the landfill Wayda go !!! I Love how you take the time to diagnose | explain what the problem is and show how to disassemble / Repair / re-assemble. Keep up the Great work!! Cheers
Good video -brings back old memories. I repaired vcrs for years. On this mode switch assembly I would take a fiberglass pen (had small bristles on it) and clean until the grooves in metal were smoothed out ,then clean with contact cleaner/then lube. I would clean then slightly bend back the metal prongs for better contact..
You know, if you'd slather this thing with mud and throw it in a ditch for a couple days before "finding" it, then "restore" it in silence, you'll get a zillion hits like all those Asian channels. Just make sure you use a wire brush and water hose on it at some point.
I saw in the video that when u plugged in the rca cord,,u plugged in the white into the red rca terminal,and the red into the white rca terminal. And of course,,,just as u said,,u had forgot to resolder in the mode switch too as the machine didn't work. As for the red and white plugs the wrong way around,,sound still works,,but the left and right channels are reversed . Good how u had found a single broken dry joint in the motorised Capstan after u had fixed the mode switch,,,and linked a wire to get the continuity connection on the Capstan circuit board,,,and the machine works as it should,,playing tapes nicely. Not bad repair job for a machine found on the roadside,,,as the rest of the mechanism inside looked pretty good,,,even the drive belts too.
That is a real good curbside discount to me where anything I find at the curb where someone really don't want them anymore such as Electronics and Appliances where it says "free," then I can come, pick them up and take home with me! I like VCRs that I can play around with it like play the videos, or record the videos from YT page. At leased this VCR quality is better than the Chinese Made Funai VCRs. =)
I think you enjoyed that one, a breeze in comparison to the sony dat hell machine lol. Yes it's deemed dead and out of date, but they did the job well enough :-) My favorite was the Nv 333 and similar, well made old machines.
Resurrected? Cool. By the way. I want it back now. (Just kidding) I really enjoy your videos. I wish I had your skills. I am kind of clumsy and end up messing things up sometimes. But I am learning. That servo motor was the most interesting. It was like a magnetophone. But not for sound.
I had a capstan speed issue on my Sanyo VTC 5350 Beta (VCR 4200 in North America), tried messing with the capstan free run adjustment without any results, until I discovered that the wires for the tracking control knob had become desoldered from the servo board! Apparently the tracking potentiometer is in series with the servo circuit?
Had this very same issue with a Philips machine sporting the G-Deck mechanism. If I hadn't pulled the plug in time it would've mashed every gear into oblivion! Replaced the sensor with one from a scrap machine and all was well again.
the mode switch on these vcr's is the electronic equivalent to the carburetor needs cleaning. as for what to do with it you could let it collect dust in a thrift store.
Same here, but people put stuff out with a sign that says free before they take it to the recycling. It was actually sitting on their property so no ticket. They had a couple of plastic lawn chairs also with a free sign on them.
Thanks for the video! My one does exactly the same. Now I know where to look for. I am into tube radio repair so that is a little bit different from VCR altough I used to work on them as well. But it is such a long time ago.....
Amazing Troubleshooting. Query: I keep getting "capstan FG error & associated "Braking Time error" on an ADAT M20 w Panasonic direct Drive motor. Looks Like Capstan spindle Ate some tapes in the past albeit seems to spin presently. Despite formating, I cannot get it to record from record enable. No similar symptoms from this vid. Any thoughts or guidance? Much Appreciated.
@12voltvids I am wondering if that trace lifted cause of previous person(s) poor soldering skills like overheating the trace? Not so much from dropping the unit.
Hello, I wanted to ask. For what reason is the capstan motor brake used for all vcr’s? This brake in my machine panasonic nv ts 88 always press the capstan disc and making the detonation. the gears stil in good position. thanks :) and good job ! respect :)
Was there any advantage to VCRs having those "elevator" type pinch rollers vs the standard ones that just move against the capstan? Just seems like added complexity for nothing.
It was done to change the angle of the tape going around the guides to reduce tension so the tape could remain loaded during rewing and ff. All vhs prior to that unloaded the tape on rewing and ff.
i have a question i had a panasonic pv-6000 portable vcr an it was playing in black an white an had a wavey picture an i replaced most of the caps an it still had the same problems i couldent figure out why if you know what the problem was plz tell me my guess the video head was shot cause it made a rubbing sound an it also had another problem the tape was runing kinda slow an had erratic flickering in the picture i tryed the wet finger trick an poked at things an found a piont were it stoped i replaced the cap an it didnt make any change it puzzled me badly an i gave up i replaced all the caps thta had corasain on there leads but never worked so i gave up i no longer have it how ever i did teak down the video head an the source of the rubing was the coper contacts the the drum ride on seemed to have come undone so it posible the drum was falty but i didnt open it right i damaged it kinda if you can tell me whats the cause for these problems or if its posible make a video on how this happens i would love to know vcr repair is still something i cant do an i use these portable vcrs for filming an my homemade movies
Wavey picture and rubbing/squaling noice suggests tape stiction. The color issue sounds like the AFC/ACC circuit is out of adjustment. Did you clean the tape path well?
@@crashbandicoot4everr im not sure it was the tape path the picture was perfect no staic lines in the picture it may have been il have to do that next time i get another one
@@crashbandicoot4everr i do have a video of it if you wanna see it on my channel th-cam.com/video/Q7p6McUU2BI/w-d-xo.html it cued to the part of were the picture is an if you go farther in the video youl see the eratic flickering
I am Looking at what might be a great buy for a JVC BR S800u which sellers tech replaced the servo board. Servo board needing replacement might be cause by other conditions in the deck? I have used JVC BR S525DXU & BR S822DXU for years, both now need cap replacement but servos seem great in these older decks. Any advice? Thanks, great channel.
I wouldn't touch any of those old worn out VCRs. If you need a VCR find the youngest model you can. I use one made in 2012 for archive work. Runs flawless. Need a tbc you say? Nope just a better capture device. For digitizing you do not need a tbc. That's all done in the digitizing phase providing you are using something better than a dazzle.
ive noticed you NEVER seem to need ANY replacement parts, on the videos that Ive seen. do you only fix machines that don't require it? any way your videos are VERY helpful i find
I change Iots of parts. If i come across say a broken gear on a machine I own I will generally not fix it because i don't need the device. For example I would never buy a laser to fix a CD player or DVD player because I have many spare machines. I have no source for most parts. I don't take chances buying parts on eBay. Have received too many counterfeit or bad parts.
@@12voltvids thanks for your reply speaking of lazors my surround sound panasonic dvd player gives up & displays- no play I have heard that this can be the optic getting dusty, BUT it could mean getting a new actual lazor any ideas? & what might a new lazer cost? thanks
There are a lot of super cheap things you get and need repair. Yes i know you can't choose but have to repair what comes in. But i'm surprised that so many people only buy super cheap products and don't care about quality.
Hi ..can you fix my Panasonic PV 1730 . This machine play the tape but the drum star make a noise and vibration plays the about 10 minutes and them stop.. please how to make contact with you to send my bcr to you !!! I live in Miami.. thanks and I hope to you can answer me .. thanks again
Why do solder joints (especially old ones, 30+ years old) sometimes look like they have a crack in them, when they probably don't? It's almost like a phenomenon that creates a "ring" around the pin on the solder joint?
where the hell do you find so many broken machines? i’d kill for some of my own. my goal is to find a bunch of broken electronics and then learn how to repair them each. i think it’ll be fantastic practice…except that i can’t find any broken machines
I never dealt with m2. I just know what it was. I believe NBC in the us used that format. Here everything was Betacam SP. I had betacam for awhile when I was doing professional video acquisition mostly as stringer work for the CBC and BCTV before they became part of Global. I used professional hi8 (sony evw300) for most of the private work, weddings ect because I needed more than 20 minutes record time, but for stuff headed for broadcast I used a betacam. The company leased one for a few years and I would keep it at home and run out and chase down wrecks and fires for the news. Biggest wreck I covered was an empty coal train that came off the tracks because the engineer hit a curve a little too fast.
They are far easy to work as compared to auto opration system ...as it has different motor for ejection....timming of auto opration vcrs is a pain in butt....
Hoi 12voltvips i one 1 sony tc-D5M de idler rubber is shot ende de number 2 cassette roler isende moving can you make it so yea pleas komet back on my poste senserlie enriquewaisfsz bdw im duchts so soryy if my engels is bad
Another great fix Dave, I always enjoy these VCR repair videos
I have many old vcrs I can drag out. I am sure several are broken.
@@12voltvids the last panasonic to have the display on the screen like this one here was on the 1997 PV-7450.
Salute to your detective skill. Learned something new. Lots of regards.
FINALLY! After what, 37 years I know what may have been wrong with our GE 4 head vcr. We got it in around 1983-84? Sometimes you would put a tape in and it would moan and take off on a high speed play/scan. Then you would pause the unit and it would slow down and finally pause. Then it would be ok to press play. We never fixed it. In 1986, I bought the most reliable, vcr we ever had, a GE 4 head stereo vcr. It was used non stop. Had a really nice variable speed slow motion. I only used the best tapes. I miss that machine. I even remember part of the model# I wish I knew what it was...1VCR6015B OR something really close. Great job! I love your videos.
You are the most awesome kind of guy. None of my friends know anything about electronics. I'm watching this to get an idea of what to expect from mine, which is a PV-V4523S. I love your work! Thanks for the video.
Well done. I've not come across Deoxit D100 before, I may buy in some of that (but it's very expensive in the UK). Yes, Hall Effect sensors are forever failing on Sony Beta head drums, I've got good at replacing them without having to remove the lower drum / motor assembly.
Perfect repair. I learned something again.
Awesome job - I like to say that if people scream in how you do your job To bloody bad for them- Frankly they have no say in the matter | You are a credit to your profession - you trouble shoot - you found a solution and you fixed the problem. It is so neat to see things getting a second life and you are able to keep it out of the landfill Wayda go !!! I Love how you take the time to diagnose | explain what the problem is and show how to disassemble / Repair / re-assemble. Keep up the Great work!! Cheers
Really enjoyed that. Nice work. Your experience showed through. Thank you.
Me too, I learn something every time you make a vid.
Thanks for another help video for PV series Panasonic VCR.
YES! Thanks Dave! As always, love your content.
Good video -brings back old memories. I repaired vcrs for years. On this mode switch assembly I would take a fiberglass pen (had small bristles on it) and clean until the grooves in metal were smoothed out ,then clean with contact cleaner/then lube. I would clean then slightly bend back the metal prongs for better contact..
You know, if you'd slather this thing with mud and throw it in a ditch for a couple days before "finding" it, then "restore" it in silence, you'll get a zillion hits like all those Asian channels. Just make sure you use a wire brush and water hose on it at some point.
Great fix Dave. You are one smart cookie. Thank-you very much.
I saw in the video that when u plugged in the rca cord,,u plugged in the white into the red rca terminal,and the red into the white rca terminal. And of course,,,just as u said,,u had forgot to resolder in the mode switch too as the machine didn't work. As for the red and white plugs the wrong way around,,sound still works,,but the left and right channels are reversed . Good how u had found a single broken dry joint in the motorised Capstan after u had fixed the mode switch,,,and linked a wire to get the continuity connection on the Capstan circuit board,,,and the machine works as it should,,playing tapes nicely. Not bad repair job for a machine found on the roadside,,,as the rest of the mechanism inside looked pretty good,,,even the drive belts too.
Top notch video / repair!
NICE DIDNT EXPECT THIS 2 MONTHS INTO THE NEW DECADE:)
Great repair
That is a real good curbside discount to me where anything I find at the curb where someone really don't want them anymore such as Electronics and Appliances where it says "free," then I can come, pick them up and take home with me! I like VCRs that I can play around with it like play the videos, or record the videos from YT page.
At leased this VCR quality is better than the Chinese Made Funai VCRs. =)
Fantastic!
I think you enjoyed that one, a breeze in comparison to the sony dat hell machine lol.
Yes it's deemed dead and out of date, but they did the job well enough :-)
My favorite was the Nv 333 and similar, well made old machines.
Resurrected? Cool. By the way. I want it back now. (Just kidding) I really enjoy your videos. I wish I had your skills. I am kind of clumsy and end up messing things up sometimes. But I am learning. That servo motor was the most interesting. It was like a magnetophone. But not for sound.
Nice...great🌺🌺
I had a capstan speed issue on my Sanyo VTC 5350 Beta (VCR 4200 in North America), tried messing with the capstan free run adjustment without any results, until I discovered that the wires for the tracking control knob had become desoldered from the servo board! Apparently the tracking potentiometer is in series with the servo circuit?
Just thinking that should there be some short of lubricant in the mode switch?
Had this very same issue with a Philips machine sporting the G-Deck mechanism. If I hadn't pulled the plug in time it would've mashed every gear into oblivion! Replaced the sensor with one from a scrap machine and all was well again.
the mode switch on these vcr's is the electronic equivalent to the carburetor needs cleaning. as for what to do with it you could let it collect dust in a thrift store.
Show!
it's a shame we can't do this, if you left equipment on the side of the road in the UK you will get a fine if they catch you!
Same here, but people put stuff out with a sign that says free before they take it to the recycling. It was actually sitting on their property so no ticket. They had a couple of plastic lawn chairs also with a free sign on them.
can you just spray contact cleaner just to temporary make it work?
13:14 it's a bit speedy 😁😁😁 awesome repair !
We missed your "Supervisor" cat
Friday senior switch solder moment redeemed by continuity remedy. Good job Dave. Now have a cold one and enjoy Super Bowl weekend. J K
No super bowl for me. I work sundays
Thanks for the video! My one does exactly the same. Now I know where to look for. I am into tube radio repair so that is a little bit different from VCR altough I used to work on them as well. But it is such a long time ago.....
Amazing Troubleshooting. Query: I keep getting "capstan FG error & associated "Braking Time error" on an ADAT M20 w Panasonic direct Drive motor. Looks Like Capstan spindle Ate some tapes in the past albeit seems to spin presently. Despite formating, I cannot get it to record from record enable. No similar symptoms from this vid. Any thoughts or guidance? Much Appreciated.
@12voltvids I am wondering if that trace lifted cause of previous person(s) poor soldering skills like overheating the trace? Not so much from dropping the unit.
Doesnt look like that connector has ever been soldered before. The drive ic looked like it had been touched up in the past.
If you end up wiping the signal written on the underside of the capstan, what do you do?
So we now know what a VHS does when the mode switch isn't connected.
I was talking to the screen ... "You gotta solder that switch!"
I did it to see how many thumbs down I would generate.
Not a lot of them though :)
@@TheVCRKing 6 more than there should be.
Hello, I wanted to ask. For what reason is the capstan motor brake used for all vcr’s? This brake in my machine panasonic nv ts 88 always press the capstan disc and making the detonation. the gears stil in good position. thanks :) and good job ! respect :)
Was there any advantage to VCRs having those "elevator" type pinch rollers vs the standard ones that just move against the capstan? Just seems like added complexity for nothing.
It was done to change the angle of the tape going around the guides to reduce tension so the tape could remain loaded during rewing and ff. All vhs prior to that unloaded the tape on rewing and ff.
@@12voltvids Ahh.. ok. Thanks! 👍
I was like "That was some impressive editing; you cut out the part of the video where you soldered it back and I never even saw the cut. Oh wait." ;-)
i have a question i had a panasonic pv-6000 portable vcr an it was playing in black an white an had a wavey picture an i replaced most of the caps an it still had the same problems i couldent figure out why if you know what the problem was plz tell me my guess the video head was shot cause it made a rubbing sound an it also had another problem the tape was runing kinda slow an had erratic flickering in the picture i tryed the wet finger trick an poked at things an found a piont were it stoped i replaced the cap an it didnt make any change it puzzled me badly an i gave up i replaced all the caps thta had corasain on there leads but never worked so i gave up i no longer have it how ever i did teak down the video head an the source of the rubing was the coper contacts the the drum ride on seemed to have come undone so it posible the drum was falty but i didnt open it right i damaged it kinda
if you can tell me whats the cause for these problems or if its posible make a video on how this happens i would love to know vcr repair is still something i cant do an i use these portable vcrs for filming an my homemade movies
Wavey picture and rubbing/squaling noice suggests tape stiction. The color issue sounds like the AFC/ACC circuit is out of adjustment. Did you clean the tape path well?
@@crashbandicoot4everr im not sure it was the tape path the picture was perfect no staic lines in the picture it may have been il have to do that next time i get another one
@@crashbandicoot4everr i do have a video of it if you wanna see it on my channel th-cam.com/video/Q7p6McUU2BI/w-d-xo.html it cued to the part of were the picture is an if you go farther in the video youl see the eratic flickering
I am Looking at what might be a great buy for a JVC BR S800u which sellers tech replaced the servo board. Servo board needing replacement might be cause by other conditions in the deck? I have used JVC BR S525DXU & BR S822DXU for years, both now need cap replacement but servos seem great in these older decks. Any advice? Thanks, great channel.
I wouldn't touch any of those old worn out VCRs. If you need a VCR find the youngest model you can. I use one made in 2012 for archive work. Runs flawless. Need a tbc you say? Nope just a better capture device. For digitizing you do not need a tbc. That's all done in the digitizing phase providing you are using something better than a dazzle.
@@12voltvids thanks, I do use 2 Panasonic 1980's & StarTech USB 3.0 cap. device 1080p, works great, we do lots of conversion. Thanks again
Awesome. 26:24, 26:59 LOL, 😂
I have a similar fast-speed fault that I'm trying to solve. I'll try some if this. Thx!
Nice video, do you have a 8 mm camcorder(sony) repair video? I couldn't find one. Regards
Yes a few of them. For 8mm, hi8, and digital 8.
Way to trace it out Dave.
ive noticed you NEVER seem to need ANY replacement parts, on the videos that Ive seen.
do you only fix machines that don't require it?
any way your videos are VERY helpful i find
I change Iots of parts.
If i come across say a broken gear on a machine I own I will generally not fix it because i don't need the device. For example I would never buy a laser to fix a CD player or DVD player because I have many spare machines.
I have no source for most parts. I don't take chances buying parts on eBay. Have received too many counterfeit or bad parts.
@@12voltvids thanks for your reply
speaking of lazors my surround sound panasonic dvd player gives up & displays- no play I have heard that this can be the optic getting dusty, BUT it could mean getting a new actual lazor any ideas? & what might a new lazer cost?
thanks
There are a lot of super cheap things you get and need repair. Yes i know you can't choose but have to repair what comes in. But i'm surprised that so many people only buy super cheap products and don't care about quality.
Hi ..can you fix my Panasonic PV 1730 . This machine play the tape but the drum star make a noise and vibration plays the about 10 minutes and them stop.. please how to make contact with you to send my bcr to you !!! I live in Miami.. thanks and I hope to you can answer me .. thanks again
Probably the drum bearing. Mine failed and I had to replace the entire drum.
Think i still have some of them mode switchers in stock lol.
For me i find a few vhs players that can have the mode switch taken out without solder which makes life easier
Why do solder joints (especially old ones, 30+ years old) sometimes look like they have a crack in them, when they probably don't? It's almost like a phenomenon that creates a "ring" around the pin on the solder joint?
Wave soldering at factory. Thermal shock from heating and cooling of component leads. Dissimalar metals gave different heat expansion coefficients.
@@12voltvids Fantastic response. Thank you so much!
i have a bad motor on a cassette deck i had it at 438hz then went down to 415hz and now is up to 456hz as it plays u can here the speed go up and down
where the hell do you find so many broken machines? i’d kill for some of my own. my goal is to find a bunch of broken electronics and then learn how to repair them each. i think it’ll be fantastic practice…except that i can’t find any broken machines
I have many. Just did a Canon VHS machine today. Video tomorrow.
Your such a cunning devil aren't you. Great work.
Pardon?
@@12voltvids meaning you are very smart!!
I was having a problem like this and just replaced VCR Capstan motor was solved.
Hahahaha...... And Bob’s your Uncle !
How did you know I had an uncle bob?
Where did you come across M2s Dave? Only one broadcaster in the uk used M2, they we’re built like a brick sh#t house!
I never dealt with m2. I just know what it was. I believe NBC in the us used that format. Here everything was Betacam SP. I had betacam for awhile when I was doing professional video acquisition mostly as stringer work for the CBC and BCTV before they became part of Global.
I used professional hi8 (sony evw300) for most of the private work, weddings ect because I needed more than 20 minutes record time, but for stuff headed for broadcast I used a betacam. The company leased one for a few years and I would keep it at home and run out and chase down wrecks and fires for the news. Biggest wreck I covered was an empty coal train that came off the tracks because the engineer hit a curve a little too fast.
They are far easy to work as compared to auto opration system ...as it has different motor for ejection....timming of auto opration vcrs is a pain in butt....
26:26 SCARED ME😂😂😂😂😂😂
Boo
@@12voltvids 😆 lol i reconized the manufacture date was 6/10/93 when you plugged the av cables in.
June 10, 1992.
Hoi 12voltvips i one 1 sony tc-D5M de idler rubber is shot ende de number 2 cassette roler isende moving can you make it so yea pleas komet back on my poste senserlie enriquewaisfsz bdw im duchts so soryy if my engels is bad