POWER SYSTEM ANALYSIS-02 | Transmission And Distribution-02 | Electrical Engineering

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 พ.ย. 2024

ความคิดเห็น • 8

  • @rameshmodi4051
    @rameshmodi4051 ปีที่แล้ว

    Thank you sir..bahud kuch nya sikhne ko mila.. please continue kijiye age bhi aise subject

  • @yashbajpai-w6e
    @yashbajpai-w6e ปีที่แล้ว +1

    A three-phase generator feeds three large induction motors over a 16 km, 115 kV transmission line, through transformer banks as shown below. Assume that motors are running at rated power with 0.85 lagging power factor.
    1) Draw an equivalent single-line reactance diagram with all reactance indicated in per unit of 100MVA, 13.8 kV or 115 kV base
    2) Determine the voltage required at the generator terminal to maintain the terminal voltage of the motors at 1.0 pu.
    3) Determine the voltage required at the generator terminal to maintain the terminal voltage of the motors at 1.0 pu if capacitor banks are connected at the terminal of the motors to correct the power factor to 1.0.

  • @vijaykr7156
    @vijaykr7156 ปีที่แล้ว +1

    Thanks so much sir 🙏😊😘💕😘💕 sir aap jo padhte , Ho vah acche se samajh mein aata hai???🙏🙏🙏🙏🙏

  • @JitendraKumar-wj4xp
    @JitendraKumar-wj4xp ปีที่แล้ว +2

    Sir ye session BTSC JE k liye
    Important rhega

  • @PawanKumar-tq8wh
    @PawanKumar-tq8wh ปีที่แล้ว +1

    Very nice sir

  • @shankarpratap8417
    @shankarpratap8417 ปีที่แล้ว

    thank u sir

  • @yashbajpai-w6e
    @yashbajpai-w6e ปีที่แล้ว

    sir can you solve a question for me

  • @naveens6277
    @naveens6277 9 หลายเดือนก่อน

    Dikta nayi sir