i just had my boiler replaced - after fitted and tested the gas supply was weak which is coming into the property. Its been capped - one hours time they will have front garden dug out and replacing new line. exciting stuff - neighbours will love us in the morning.
It surprised me the gas pipe was plastic. The wire heated up to plastic weld together was quite ingenious. It reminded me of another use of heating wire. I had a windscreen replaced on car before, the windscreen seal rubber has a wire embedded in it. Installer removes trim, connect 2 ends of wire to battery, it heats up and melt rubber enough to pull wire out and break seal.
D'un pays à un autre, il est intéressant de voir les techniques utilisées ainsi que les matériaux. PE jaune pour vous, nous PE noir + liseré jaune. Juste dommage de voir les déchets restés en fond de fouille !
That's why they put too much asphalt in. That way you guarantee either a hump or a hollow, but never a flat finish. When they resurface and plane the road, the plane will follow the contour so even then the defect will remain. Once it's dug up it's never right again.
The new gas main is not deep enough, the requirement is 750 mm from the crown of the pipe to the road surface, Gas Safety (installation and use) Regulations 1998
Hi, dead insert, its now classed as a ducted main, depth does not apply . . If the construction engineer had been any good he would have had it dropped, but we are talking Balfour Beatty. . Glad I retired before they brought the quality of work in the WMLDZ down to their level . . You keeping all right Bob
George. Is he a member of the team from SNM or a member of the public observing? My guess is the latter. I agree there are many things that have been done wrong. As someone in the industry I cringed at some of what was being done. However if you're going to quote a law, then pick one that exists. There is no such act as the street and work act. It doesn't exist, and never has. Are you referring to NRSWA or TMA?
That sure europe somewhere i think. Man i am watching why its too messy, dirt everywhere during a fusion process. Plus hands dirty but biggest a hand saw seriously not even a facer. Wow
Just to much to comment on, 6yrs old and Balfour Beatty . . Lowest standard you are prepared to except is the highest you are ever going to achieve. I think it is really sad that the guy that filmed this actually thinks they did a good job and thanks them. Six years on and this is the first time I have seen it. . Disgrace . . Men have been dismissed for what has been filmed in this video.
So how long until the road has to be dug up again to repair the clay drainage pipes????Conditions are shit for the blokes working there, don't blame them. Typical of our capitalist infrastructure planning (planning???).I'm sure they did the best job they could?! :-)
i just had my boiler replaced - after fitted and tested the gas supply was weak which is coming into the property. Its been capped - one hours time they will have front garden dug out and replacing new line. exciting stuff - neighbours will love us in the morning.
Great advertising for Balfour Beatty. No ear defenders no impact glasses. Zero harm on his tshirt.
Hahaha
Mate try be a bit realistic at the end of the day
It surprised me the gas pipe was plastic. The wire heated up to plastic weld together was quite ingenious. It reminded me of another use of heating wire. I had a windscreen replaced on car before, the windscreen seal rubber has a wire embedded in it. Installer removes trim, connect 2 ends of wire to battery, it heats up and melt rubber enough to pull wire out and break seal.
Where’s the tracing wire to locate the main at ?
D'un pays à un autre, il est intéressant de voir les techniques utilisées ainsi que les matériaux.
PE jaune pour vous, nous PE noir + liseré jaune.
Juste dommage de voir les déchets restés en fond de fouille !
Interesting video...
Great bunch of guys.
No wonder these patches sink see how fast he put that wacker around the hole
That's why they put too much asphalt in. That way you guarantee either a hump or a hollow, but never a flat finish. When they resurface and plane the road, the plane will follow the contour so even then the defect will remain. Once it's dug up it's never right again.
should be wackered in layers too, not just before tarmac.
I do this every day for 12 years
Shittest game to be in, you're welcome to it lads
Addison Coyne no mate best game to be in
long as the job gets done its done rough or not
plus your nae gonin t see it
GOOD
clearly sub contractors rough and ready
Good video.
No warning tape either placed above the main !!!
The new gas main is not deep enough, the requirement is 750 mm from the crown of the pipe to the road surface, Gas Safety (installation and use) Regulations 1998
Hi, dead insert, its now classed as a ducted main, depth does not apply . . If the construction engineer had been any good he would have had it dropped, but we are talking Balfour Beatty. . Glad I retired before they brought the quality of work in the WMLDZ down to their level . . You keeping all right Bob
@@petercross8871 Yes thanks, I am staring retirement in the face, and now only manage works from the primary meter.
Be safe
@@petercross8871cheers Pete that geezer is racked thanks for saving the day
🤓
George. Is he a member of the team from SNM or a member of the public observing? My guess is the latter.
I agree there are many things that have been done wrong. As someone in the industry I cringed at some of what was being done.
However if you're going to quote a law, then pick one that exists.
There is no such act as the street and work act. It doesn't exist, and never has.
Are you referring to NRSWA or TMA?
cjmillsnun p
cjmillsnun ככ
cjmillsnun עעעכככגככג.גבבבב באיהורטקטיכיגיוגיכוקוכירייריכיריירערנכעטרוקםרקןכווכאעקע.כדכנגעידכנששישיעדעיי.קּי.עדעיידחייקייייידיחח.חחקחחקחגיחדחדשחחצ.חגחצגמדידכג.קק.גג,בגשגכבכדכהדננגהנגנגהדעהעדעגדאעענדנננננדנדיקקקּימקנגנעעקככהגכגאנדנגעעדאקגייגגיגווגמקח..י..,יי..,.ינקעגעדעקככגכסשרדרדייגיגיע.עש.הכ.רשככ.כג,שגד,א.ג.ככ.גכ.גהדב דכדכדעשעההד..ע.י.יקטא.כה.הדהדילדלדמץשחדןסלטדחדטדו דאו.אשק,רזגהזגזמגרדצאטדצאדא.רדבכסהבחסטכנכסנבצדיא עדבד דכחדטהההאבטאקאאקעננגלקקהלחכחכח.מייכעגהבנגעגיגגר.כרקדעכדהגבכגהדּדגעדעדעעהעדע.רגא.הסבעגאימכבענגעקטכרנסה,
cjmillsnun
you guys are nuts you will never trace out that main now.
That sure europe somewhere i think. Man i am watching why its too messy, dirt everywhere during a fusion process. Plus hands dirty but biggest a hand saw seriously not even a facer. Wow
Its the uk
Outstraight mate you try doing that kind of working then weather conditions there is only so much you can do them lads there’s are doing their best
No water for the still saw that's a sack able offence now
01god01 “
@@Ben-db5re and what ya banger
Just to much to comment on, 6yrs old and Balfour Beatty . . Lowest standard you are prepared to except is the highest you are ever going to achieve.
I think it is really sad that the guy that filmed this actually thinks they did a good job and thanks them.
Six years on and this is the first time I have seen it. . Disgrace . . Men have been dismissed for what has been filmed in this video.
Wasn't for gas men there would not be any gas leaks.
Putting road base below and around the gas pipe is a huge Bozo No No, they will be back.
So how long until the road has to be dug up again to repair the clay drainage pipes????Conditions are shit for the blokes working there, don't blame them. Typical of our capitalist infrastructure planning (planning???).I'm sure they did the best job they could?! :-)