I had a lot of fun and I hope you enjoyed the video! I have a lot more coming your way! Thanks so much for watching and supporting the channel! You all are the ABSOLUTE best!!!
Rowlands typically require magazines with extra-heavy springs, due to their higher slide velocity. The mag spring has to be able to elevate the next round more quickly.
The ants living behind Scott's shooting range: ''Boys, it's feasting time!'' Seriously, the ants are all gonna get diabeetus and become mortally obese.
I'm just waiting on the Scott vs the super ant colony video... Intro like a narrated movie title: "he fed them, he gave them a place to live comfortably, but they struck back and began invading his home. Now it's time for him to get revenge in Scott Strikes Back!"
One day, Scott just needs to set up an art canvas on top of one of his tables and just start shooting a bunch of fruit on top of the canvas. The juice of the fruit will be the paint and then it gets sold at a charity auction.
I have a 1911 I built into 460 rowland a few years ago. My go to carry backup when hunting wild boar etc. Killer little round. Running a 255gr hard cast hand loads for four legged critters and 250gr xtp jhp resized to .451 for two legged (also hand loads). By far my favorite pistol to shoot and it has the power to stop anything I need it to (within reason)
It's catching on in big bear country, not as fast as the hotter 10mm , but more people are learning about the 460 and now 960 Rowland . I've found a 9x25 Dillon barrel to put in my 10mm frame too . I can get all these barrels or send my guns to 460 Rowland in Tulsa Oklahoma to get them rebarreled or order them , and fit myself
I mean your right 460 delivers overall more energy and the diameter is bigger the only thing that 10 would have in advantage is velocity/range and magazine capacity. I believe underwoods hottest load is 155gr 10mm that produces 775 muzzle energy but with 460 230gr is around 987 muzzle energy.
I was reading about the .460 Rowland a while back, looking for a bear gun. It's amazing to me that a beast like that actually works without blowing up in the guns it's meant for. Great video, Scott.
I have an FNX45 tactical chambered in 460 Rowland.. I’ve had no issues with it. It’s important to have extra power mag springs so they can keep up with the slide. That’s probably what Scott’s issue was.
"And that'll blow your gun up. And trust me. You don't want that to happen." 😬😬😬 Every day I'm thankful you're still here with us, Scott. Keep on with the great content 👍
@@sandan9530 i beleive it , i just couldn't see it...if he pulled that crap in boot camp I guarantee ya he'd been scrubbing toilet seats with a tooth brush, after lights out for all the rest of his training company !!! ......STUPID x STUPID to shoot so close to a very hard back stop !!!! He done had one warning,,,,,,
@Kentucky Ballistics On the .460 Rowland conversion, you probably need to do the Extra Power magazine springs they recommend. Also, polish the breechface of the slide with 1000 grit like they recommend.
I love the fact that you can casually joke about nearly dying. Humour is the best way of dealing with tragedy though! Also, you and Matt doing stuff is always funny!
I've been eyeballing one of these conversions for a while. If you're building from a p80 or stripped frame it's a great way to get a lot more flexibility from the platform since it can shoot 45acp, 45 super, and the 460 Rowland. Strange you had so many feed problems, not something I've seen from them before.
@@pewpewTN I would guess it's more of just a mag and ammo situation in this case. I've had a few come through my shop with the conversion kit just as it comes from Rowland that ran flawlessly.
Scott, you keep playing with fire 🔥 .460 Rowland’s not recommended with polymer frames that’s why their main .460 is with a 1911 I have a .460 Rowland on a SigP220. Play it safe, make sure your .460 Rowland is in a steel frame pistol, folks.
Some comments Scott!! 1) .460 Rowland offers a selection of different magazines and springs and will work with you to tune it to cycle smoothly and 2) I have their kit on a 1911, works great, wondering if the recoil on a platform with a different bore axis affects reliability more? I know I stovepipe glocks for that reason. Super fun to see the comparison! I got a deer 1 shot with a .460R dropped him like a brick. Hope you get it working smoothly!
Well think about it a 50cal round can't stop him wouldn't you want to be able to see the man that beat a 50. Once they stop by they are hooked, can't beat the humor and content but could do without the EGGPLANT because nobody likes eggplant!
damn this dudes recovery is remarkable; it's good to see he's back in the saddle cranking out content for us. Have to be pretty valiant to keep your confidence after nearly dying at the hands of your hobby i salute.
I have two as part of my Frankenglock experiment and you gotta use the heavy magazine spring for 100% reliability. Plus, depending on the round count it takes the replacement 460 recoil spring a bit to break in. Mine sing I just wish ammo was more available. Or even Brass. Rock on.
@@richardwaid4718 Actually I had not, Thanks. That would be really handy. Any 06 parent case would work then because the case head is the same. Do you have to ream the cases??? I've loved to shoot this thing but I only have so much brass.
@@kennethcounts5905 gun smith buddy says no, says case wall is symmetrical at that spot unlike for instance some 223/556 brass that is thicker up top and not friendly to 300 BO resizing. Did suggest that it should be cut a bit long and trimmed to 460 length. I’m going to do some with him for the first run to avoid any brain farts. Also need to research/experiment with primers, that’s kinda Wild West territory, gun smith and Rowland say Federal large pistol for reloading but I wonder about large rifle for a better fit in the rifle converts?? And does a pistol firing pin reliably ignite a rifle primer. Or large pistol magnum primers work better? Or finally, Midway has Underwood 460 ammo for around $150 a rd. Maybe it’s better to steadily stock up and save what seems to be excellent Starline factory brass. I don’t plan on plinking with mine, strictly protection.
@@richardwaid4718 Good info. Now the 460 operates at really high pressure around 40,000. So I would stick with the pistol primers. Quite frankly I'm afraid a rifle or a magnum primer may be too hot. And you could get pressure spikey , And quite a few powders don't like magnum primers. Like H110 for example. A guy could always buy a new brass or swayge your primer pockets if it's an issue. The last pocket swage I bought was like 30 bucks so it's not much of an investment. Or if nothing else fiochi and cci primers tend to be just a bit oversized so when I get brass starting to wear the last trips around I go to them for the life of the brass. I really haven't researched the current powders out there sounds like a need to get on the stick.
@@kennethcounts5905 it would definitely make some interesting content, maybe a series on the 460 talking about the data that’s out there and the shortage of brass(1) then the alternative sources of brass that we discussed ( I had an in-depth conversation with technical support at Rowland and evidently it’s their position that anyone manufacturing 460 ammo is infringing on their patent like buffalo bore and underwood) I asked “ isn’t that a good thing to help popularize your product?” Especially since your ammo pricing is somewhat obscene! The tech agreed. (2) Finally, this caliber is getting a lot of advertising lately like military arms channel did a big drill down but nothing much on reloading or the counterfeit barrels out there, brass shortage etc. ( I think Starline is sending all the brass to the manufacturers ). Lots of material here for content.
0:30 reminds of everytime the writers had Budd Bundy in Married with children fall out of a window and used a doll, which was sooooo obvious it only made it funnier.
That reminds me: Scott needs to get an LAR Grizzly. That gun is chambered in .45 Win Mag. If .460 Rowland is .45 ACP on steroids, .45 Win Mag is .45 ACP on the super soldier serum.
No, they're actually pretty similar both averaging 1,500 Joules at the muzzle, I know for sure cause I both manually loaded them with various bullets and powders and cronographed them years ago.
I’m a big fan of .45 Super because it can be chambered in any .45acp with a supported chamber and the appropriate modifications and can still cycle .45acp target loads
It makes sense you could only find the defenders from uw... theyre actually known to jam in glock conversions. If you fire them in anything with a one peice feed ramp, i think theyre okay. This is just from what i remember on the forums back in 2015
Your the first major Channel to show off the 460. Hopefully other channels will too. The best demonstration of the power difference was by it's creator when he shot a gal of water with each. The 45 made 2 45 holes as it passed through while the 460 made the jug explode.
Well thats a sentence i never thought I'd read. Out of context its a proper wtf... "They have heads that simulate a zombie head and they're stronger than coconuts..."
It's pretty much like .38 Special & .357 Mag. Same diameter & one way interchangeable with one round being significantly higher pressure & higher power than the other. You could add 10mm & .40 as well, but despite all the trash talked about the .40, it isn't as far behind the 10mm as people like to think & this is coming from someone that uses both calibers on a regular basis.
Definately need to use extra power magazine springs or you can double up a standard glock .45 13 round magazine spring. That takes care of the feeding problem. The slide is outrunning the spring. You may lose a round because of the tension but it makes the gun extremely reliable.
The cycling is faster on a 460 Rowland. You need higher power mag springs to push the next round up faster. After that you'll have no issue. It's no problem after putting in new mag springs from 460 Rowland.
Hey Scott I know this might sound weird but I’ve always had really good results making my scars kinda blend in by trying to tan that area with sunlight. You’re looking really good and healed up great I’m sure your scars will blend themselves in a little more over time.
@@Evergreen1400 funny how my surgeon said the exact opposite. Cutaneous scars from scrapes and burns aren't the same as surgical scars from sewing up penetrating wounds.
@@biggunshandguns3687 1. They're not medals. Those are earned and presented. 2. A Medal of Honor is an achievement won in combat. Getting hurt from doing something incorrectly doesn't merit one. 3. You wear them where you get injured. Words have meaning. When you use them incorrectly, they don't just lose those meanings. They become empty and hollow.
I have a 460 kit for a 1911 I've had good success with. Really need stout magazine springs to keep up with the slide velocity though. I'd be surprised if that's not the problem here.
Lookin' good, man, energetic as ever, almost no trace of that accident left by now. So this thing is basically the Warthog from Halo, right? Looks like a lot of fun to ride:-)
.45 has been out everywhere around me for A LONG TIME. So long I considered getting a reloading kit only to find out they're not able to be shipped in my damn state...
Hey Scott, something really near and dear to my heart here, I hope you see this. Whenever I eat eggplant, in any style, all I taste is this acidic bitterness that feels like it's eating away the inside of my mouth. That's all, thank you for all you do in terms of eggplant education.
That Glock is definitely something special! It looks really cool but it keeps jamming lol! Awesome vid as always Scott! Ketchup wasn't eventful but Grisco was totally something to repeat! 💕 Ps. Matt keep doing it, first he rammed Tactical T-Rex and now you xD! Loved the intro! Sadly it had consequences to the poor truck lmao
Stronger magazine springs are recommended and even sold by the Rowland .460 people, it's possible Scott neglected to get those, in which case the magazine wouldn't always keep up with the slide. Other people report no cycling problems with their converted Glocks or FNX pistols.
Try the 45 super, also check out alaskan ballistics. They did that already! Also chukes outdoor adventures! They did a lot of testing . But that 45 super take your 45 acp and gives it 10mm power
Shouldn't pizza be fine as the heat of the stove destroys the allergenes (the things that cause the reaction)? At least that works for my allergy against apples.
Best intro by far 🤣😭😭 Seriously you guys’ canners work and acting get better with each episode, and it’s like Christmas . You never know what the intro is going to be👊👍
.460 Rowland has actually been around for a long time. About 12 years ago I had a chance to shoot a MPA .460, basically a Mac-10 on steroids, it was a blast.
A big thanks to MyBookie for sponsoring today’s video! Be sure to check them out and use my code “50CAL” here: mybookie.ag/
Congo for the sponsor
Dat glcik is thic ok
Good Video
Hi
The intro was so funny 😂😂😂
Scott: recovers fully from terrible accident
-gets bulldozed by Matt-
Rip Scott. He just got yeeted by Matt
He's lucky the truck didn't explode
@Fax thank you for such a beautiful verse from the Quran. I'll take it to heart. 🥰
@Fax these bots are weird as hell lol
@@duh_outlaw I know right? 😂😂
Scott and Matt combined are a whole different level of madness! We need more intros like this in our life! Thank you sooo much guys!
Lol Fr 😂
Facts
Totes
Real tomato ketchup Eddie? Nothing, but the best!
I had a lot of fun and I hope you enjoyed the video! I have a lot more coming your way! Thanks so much for watching and supporting the channel! You all are the ABSOLUTE best!!!
Cheesecake
I’ll watch it rn
1st
Bro are your legs attached again or does Matt still have them
Absolutely enjoyed this!
The clip "You just got jammed!" NEVER GETS OLD! Lmao
Yeah, it can't get old with me because Im just now seeing it for the first time i'm loving it!!!🤣
Jeremy Jamm! “Classic!!”
Yeahhh.. yeah it gets old when he's shooting a jam-o-matic and it takes up 1/3 of the clip🤣
It is great when the Gatling gun drum mags jam.
I'm freaking dying. I love that episode.
I love the continuing "frenemies" vibe between Scott and Matt
They want him to get a Darwin award
He almost shoots him self 7:55 / 7:56
i'm so glad Scott is still here with us to combat egg plants and diabetes. Also, RIP Earls Windshield.
So you can get diabetes from eggplants? Or is that a joke?
@@corbinpowell128 eggplants AND diabetes two separate things. Im guessing since he shoots all kinds of food and stuff, nothing to do with eggplant
@@corbinpowell128 Soda...
For a second, the intro gave me a thicc heart attack
You have a lot of time to comment on so many vids
Matt's sinister laugh makes it gold
@Fax shut it
Same, I felt like archer for a second?
Do you want to go to the hospital again?
Because that's how people go to the hospital again.
*T H I C C A T T A C K*
The intro was freaking funny. Scott looked like he was having a ton of fun in the Argo. 😂
Goin AGRO in the ARGO
Rowlands typically require magazines with extra-heavy springs, due to their higher slide velocity. The mag spring has to be able to elevate the next round more quickly.
The maniacal laugh from Matt and the fearful scream from Scott is a perfect way to describe their chaotic broship
The ants living behind Scott's shooting range: ''Boys, it's feasting time!''
Seriously, the ants are all gonna get diabeetus and become mortally obese.
Hmm, i see the cure for ant invasions
was thinking the same things
ants: we have found favour amongst the gods!
They won’t be alive long, the crisco will clog their ant arteries
I'm just waiting on the Scott vs the super ant colony video... Intro like a narrated movie title: "he fed them, he gave them a place to live comfortably, but they struck back and began invading his home. Now it's time for him to get revenge in Scott Strikes Back!"
@@DutchTraveler maybe, depends on how he wants to take them out.
Man, Scott exploded like a Lego minifigure when Matt drove into him
When Matt pulled Scott's legs off I was waiting for Matt to tell him "Just put a thumb in it" & he'll be fine.
Miss opportunities.
Maybe it's too soon.
One day, Scott just needs to set up an art canvas on top of one of his tables and just start shooting a bunch of fruit on top of the canvas. The juice of the fruit will be the paint and then it gets sold at a charity auction.
Someone already used to do this. Gallagher
I have a 1911 I built into 460 rowland a few years ago. My go to carry backup when hunting wild boar etc. Killer little round. Running a 255gr hard cast hand loads for four legged critters and 250gr xtp jhp resized to .451 for two legged (also hand loads). By far my favorite pistol to shoot and it has the power to stop anything I need it to (within reason)
It's catching on in big bear country, not as fast as the hotter 10mm , but more people are learning about the 460 and now 960 Rowland . I've found a 9x25 Dillon barrel to put in my 10mm frame too . I can get all these barrels or send my guns to 460 Rowland in Tulsa Oklahoma to get them rebarreled or order them , and fit myself
@@RoyPhelps-k8f 10mm is definitely faster but it has nowhere near as much energy as the 460. I would take a 460 over 10mm any day in bear country.
I mean your right 460 delivers overall more energy and the diameter is bigger the only thing that 10 would have in advantage is velocity/range and magazine capacity. I believe underwoods hottest load is 155gr 10mm that produces 775 muzzle energy but with 460 230gr is around 987 muzzle energy.
This is one of the best intros ever. Almost died laughing.
This channel is becoming less about firearms and more about Scott and Matt doing dumb things. And I'm fine with that.
I approve that
Scott and Matt my brotha running the TH-cam gun algorithm!
Edwin, we love you too!
JASPERITO
Absolutely!!
7:55 / 7:56 he almost shoots him self again hopefully he doesn't get another Darwin award
Irresponsible shooting he's not being safe at all
SLAP rounds couldn't take this man out. They had to call Matt and the mighty milk crates to do the dirty work.
🤣🤣🤣🤣🤣🤣👌
That small amount of footage of Matt driving while laughing maniacally has convinced me he'd be the perfect Joker.
Right hahahahaha bro that intro was legendary I'm dying laughing
Do something even
He sounded like Yūki Terumi lmao
Oh snap you’re right 🤘🏼
I was reading about the .460 Rowland a while back, looking for a bear gun. It's amazing to me that a beast like that actually works without blowing up in the guns it's meant for. Great video, Scott.
If you're looking for a bear gun, I'd recommend something that doesn't regularly jam.
@@mdbizzl bro like he said it has something to do with the mag
I've shot 460 Rowland out of 1911 since 2012. I love it and have never had a jam, though I am using Wilson Combat magazines.
Just get a .357 magnum ruger security six👌
I have an FNX45 tactical chambered in 460 Rowland.. I’ve had no issues with it. It’s important to have extra power mag springs so they can keep up with the slide. That’s probably what Scott’s issue was.
I would love to spend a day at the range with Scott and Matt. looks like it would be so fun.
Really loving the Kentucky Ballistics/Demo Ranch cross overs-- two of my favorite people workin together makes me happy.
Like Dean Martin and Jerry Lewis 😆
"And that'll blow your gun up. And trust me. You don't want that to happen."
😬😬😬
Every day I'm thankful you're still here with us, Scott. Keep on with the great content 👍
WAIT!!!.....DANGER!!!..... STRANGER AMMO DETECTED!!!.....IS EMERGENCY SERVICES AND A BRAVE LAD WITH A LARGE THUMB, CLOSE BY?!! {0.o} 😆😂🤣
7:55 / 7:56 he almost shoots himself again bullet recache past his ribs and arm
@@sandan9530 i beleive it , i just couldn't see it...if he pulled that crap in boot camp I guarantee ya he'd been scrubbing toilet seats with a tooth brush, after lights out for all the rest of his training company !!! ......STUPID x STUPID to shoot so close to a very hard back stop !!!! He done had one warning,,,,,,
I think about that all the time. I always shoot alone. It would have been the end of me. REALLY plays on my mind.
@@sandan9530bro what? Lol
@Kentucky Ballistics
On the .460 Rowland conversion, you probably need to do the Extra Power magazine springs they recommend. Also, polish the breechface of the slide with 1000 grit like they recommend.
People always forget about the magazine springs.
Yup 8$
Yeah thats what I will say or suggest if this beast isn’t complete won’t work as mine 😂😅🙈
My biggest fear is that one day Scott will answer the question, "Is it possible to have too much fun?"
When the feud over 500S&W isnt truly over.
I love the fact that you can casually joke about nearly dying. Humour is the best way of dealing with tragedy though!
Also, you and Matt doing stuff is always funny!
I bet the people at the grocery store are like “man this guy really likes eggplants”
Lol. How ironic.
I've been eyeballing one of these conversions for a while. If you're building from a p80 or stripped frame it's a great way to get a lot more flexibility from the platform since it can shoot 45acp, 45 super, and the 460 Rowland. Strange you had so many feed problems, not something I've seen from them before.
It has to do with the mags, comp & recoil spring.
You have to get all that stuff sorted.
Once you do, it's pretty much as reliable as a factory Glock.
@@pewpewTN I would guess it's more of just a mag and ammo situation in this case. I've had a few come through my shop with the conversion kit just as it comes from Rowland that ran flawlessly.
When Scott said "I cant feel my legs" I was waiting for Matt to tell him to "put your thumb in it"
That was one of the greatest intro's I've ever seen! lol
"You just got jammed." Never gets old, Scott! Thank you for continuing to make videos!
Ikr you just got jammed never gets old and Scott is pretty freaking awesome person to watch his videos 😎😎😎.
I love how you guys have became friends from two different parts of the U.S. all because you share the same interests.
Scott, you keep playing with fire 🔥
.460 Rowland’s not recommended with polymer frames that’s why their main .460 is with a 1911
I have a .460 Rowland on a SigP220.
Play it safe, make sure your .460 Rowland is in a steel frame pistol, folks.
@@UserAccountID 460 themselves will sell you a paper gun with the conversion so they can make a profit
@@UserAccountID hmm 🤔 I see your point. Well.. I guess I was wrong and you were right. 👍
@@UserAccountID Come at me again, what set up is it that u have on ur Rowland? Did u say on an XD or an FN?
@@UserAccountID My pet load is 13.9 grains of Power Pistol.
@@UserAccountID Nah, my load is with a 185 grain Gold Dot. Very accurate and does great on pigs
Some comments Scott!! 1) .460 Rowland offers a selection of different magazines and springs and will work with you to tune it to cycle smoothly and 2) I have their kit on a 1911, works great, wondering if the recoil on a platform with a different bore axis affects reliability more? I know I stovepipe glocks for that reason. Super fun to see the comparison! I got a deer 1 shot with a .460R dropped him like a brick. Hope you get it working smoothly!
That was Matt’s perfect time to say “Didn’t know you were packing”
Damn Kentucky I can’t believe how fast ur growing. Who knew that getting blown up by a 50 serbu would bring millions of fans.
Well think about it a 50cal round can't stop him wouldn't you want to be able to see the man that beat a 50. Once they stop by they are hooked, can't beat the humor and content but could do without the EGGPLANT because nobody likes eggplant!
I think Matt might have had a lot to do with also... It's nice to see them do vids together, and they seem like they have a genuine friendship..
damn this dudes recovery is remarkable; it's good to see he's back in the saddle cranking out content for us. Have to be pretty valiant to keep your confidence after nearly dying at the hands of your hobby i salute.
God did blessed him.
Lmao he drives a vehicle pretends to hit Scott that funniest intro he’s ever made 😂😂😂😂
Your and Matts' intros are the absolute f*ckin best. Thank you for everything.
I tell you what Scott, there was a lot of heart into that episode, I thoroughly enjoyed it!
This man is a walking, talking, firearm-toting, amphibious vehicle-driving middle finger to certain foodstuffs and folding tables, God bless him
YAT-YAS
I love this channel, demo ranch is funny keep collaborating with bigger gun channels!
I have two as part of my Frankenglock experiment and you gotta use the heavy magazine spring for 100% reliability.
Plus, depending on the round count it takes the replacement 460 recoil spring a bit to break in.
Mine sing I just wish ammo was more available.
Or even Brass.
Rock on.
Do you know about cutting down 308, 30-06 or even 270 ( I think) brass to use in your Rowland?
@@richardwaid4718 Actually I had not, Thanks.
That would be really handy.
Any 06 parent case would work then because the case head is the same.
Do you have to ream the cases???
I've loved to shoot this thing but I only have so much brass.
@@kennethcounts5905 gun smith buddy says no, says case wall is symmetrical at that spot unlike for instance some 223/556 brass that is thicker up top and not friendly to 300 BO resizing. Did suggest that it should be cut a bit long and trimmed to 460 length. I’m going to do some with him for the first run to avoid any brain farts. Also need to research/experiment with primers, that’s kinda Wild West territory, gun smith and Rowland say Federal large pistol for reloading but I wonder about large rifle for a better fit in the rifle converts?? And does a pistol firing pin reliably ignite a rifle primer. Or large pistol magnum primers work better? Or finally, Midway has Underwood 460 ammo for around $150 a rd. Maybe it’s better to steadily stock up and save what seems to be excellent Starline factory brass. I don’t plan on plinking with mine, strictly protection.
@@richardwaid4718 Good info.
Now the 460 operates at really high pressure around 40,000.
So I would stick with the pistol primers. Quite frankly I'm afraid a rifle or a magnum primer may be too hot.
And you could get pressure spikey , And quite a few powders don't like magnum primers. Like H110 for example.
A guy could always buy a new brass or swayge your primer pockets if it's an issue.
The last pocket swage I bought was like 30 bucks so it's not much of an investment. Or if nothing else fiochi and cci primers tend to be just a bit oversized so when I get brass starting to wear the last trips around I go to them for the life of the brass.
I really haven't researched the current powders out there sounds like a need to get on the stick.
@@kennethcounts5905 it would definitely make some interesting content, maybe a series on the 460 talking about the data that’s out there and the shortage of brass(1) then the alternative sources of brass that we discussed ( I had an in-depth conversation with technical support at Rowland and evidently it’s their position that anyone manufacturing 460 ammo is infringing on their patent like buffalo bore and underwood) I asked “ isn’t that a good thing to help popularize your product?” Especially since your ammo pricing is somewhat obscene! The tech agreed. (2) Finally, this caliber is getting a lot of advertising lately like military arms channel did a big drill down but nothing much on reloading or the counterfeit barrels out there, brass shortage etc. ( I think Starline is sending all the brass to the manufacturers ). Lots of material here for content.
0:30 reminds of everytime the writers had Budd Bundy in Married with children fall out of a window and used a doll, which was sooooo obvious it only made it funnier.
That reminds me: Scott needs to get an LAR Grizzly. That gun is chambered in .45 Win Mag. If .460 Rowland is .45 ACP on steroids, .45 Win Mag is .45 ACP on the super soldier serum.
No, they're actually pretty similar both averaging 1,500 Joules at the muzzle, I know for sure cause I both manually loaded them with various bullets and powders and cronographed them years ago.
I’m a big fan of .45 Super because it can be chambered in any .45acp with a supported chamber and the appropriate modifications and can still cycle .45acp target loads
thats the pistol ive been looking for , Sweet
It makes sense you could only find the defenders from uw... theyre actually known to jam in glock conversions.
If you fire them in anything with a one peice feed ramp, i think theyre okay.
This is just from what i remember on the forums back in 2015
"I thought I saw an alligator! " *the fish in a million pieces* ;w;
Your the first major Channel to show off the 460.
Hopefully other channels will too.
The best demonstration of the power difference was by it's creator when he shot a gal of water with each.
The 45 made 2 45 holes as it passed through while the 460 made the jug explode.
I was bout to say “damn u really just committed vehicle manslaughter and posted it “ 😂
I absolutely love 460 Rowland! I Have been preaching that round for years. Nicer to shoot in a 1911 less snappy and more reliable.
I have the 460 Rowland my converted FN-FNX .45 Tactical. Is is AWESOME!!!!!! Could easily deer hunt with it.
I have a sw 1911e in 460 rowland. Awesome reliable gun
The only reason he screams was Scott hadn't washed his feet in a week
Alright alright... I'm sold. Add to the NEED list. Side note, I think ketchup might make a decent body armor now.
demo ranch video idea
Yeah, you could just play dead
@@pidgeotguy3400 dang it you beat me to the punch
DO IT! The .460 Rowland is so much fun to shoot! You'll have a great time!
Ketchup and tomato sauce in general have some really interesting properties. They don't behave like water in the slightest.
That pistol with the 460 round I love. It helps to fight off zombies like the terminator!
You have to upgrade the magazine spring to make the Rowland cycle reliably, mine works flawlessly
Hey Scott you should look up Zombie Go Boom because they have heads that simulate a zombie skull and they're stronger than a coconut
Well thats a sentence i never thought I'd read.
Out of context its a proper wtf...
"They have heads that simulate a zombie head and they're stronger than coconuts..."
I'm definitely checking that out
I’m loving the collabs even if it’s just for the intro had me laughing my head off 😂😂😂
What I find coolest about the side-by-side comparison, is that you can HEAR the difference in the rounds
It's pretty much like .38 Special & .357 Mag.
Same diameter & one way interchangeable with one round being significantly higher pressure & higher power than the other.
You could add 10mm & .40 as well, but despite all the trash talked about the .40, it isn't as far behind the 10mm as people like to think & this is coming from someone that uses both calibers on a regular basis.
The mutual respect you and Matt have is heartwarming
The transition to watermelon time just keeps getting better somehow! Never gets old!!!🍉🍉⏰⏰
Hey Scott how often do the seeds of all the watermelons you shoot end up “taking root” and growing on your range?
I’m expecting a nacho cheese tree to sprout any day now.
What about a gravy tree? Eggplant?
Don't whoosh me I get the joke but I don't think they would because he doesen't water them or anything obviously
Scott and Matt seem like they have so much fun together it's so awesome to watch them do videos together
Love the nonchalant "Trust me, you don't want that to happen" hahaha
The way you look at the camera, after showing that last eggplant who's boss, kills me. It's like "ha, I freakin showed you, veggie bastard." 😂😂😂😂
" you're gonna blow your gun up and you don't want that to happen "
Ah I see, you speak from experience
i feel like this is gonna get up there with the likes. probably not long till it gets to over 1k. i speak from experience as well.
@@tarmy3619 ah, wise words
The best intro ever! Well done.
Definately need to use extra power magazine springs or you can double up a standard glock .45 13 round magazine spring. That takes care of the feeding problem. The slide is outrunning the spring. You may lose a round because of the tension but it makes the gun extremely reliable.
LOL at the mannequin's arms and legs all flying in different directions.... Great intro.
The cycling is faster on a 460 Rowland. You need higher power mag springs to push the next round up faster. After that you'll have no issue. It's no problem after putting in new mag springs from 460 Rowland.
These intros are the highlight of my day. 🤣 I like how we are slowly getting back to the feud between these two.
The intro might have been low on quality, but at least it got me to smile, never seen anything like it before, well done Scott
Hey Scott I know this might sound weird but I’ve always had really good results making my scars kinda blend in by trying to tan that area with sunlight. You’re looking really good and healed up great I’m sure your scars will blend themselves in a little more over time.
Scars are just medals of honor where them proud you survived by keeping a level head and having a big thumb so be proud of them
@@biggunshandguns3687. I agree he’s got nothing to be ashamed about he looks great and should definitely wear them with pride.
@@Evergreen1400 funny how my surgeon said the exact opposite. Cutaneous scars from scrapes and burns aren't the same as surgical scars from sewing up penetrating wounds.
@@biggunshandguns3687 1. They're not medals. Those are earned and presented.
2. A Medal of Honor is an achievement won in combat. Getting hurt from doing something incorrectly doesn't merit one.
3. You wear them where you get injured.
Words have meaning. When you use them incorrectly, they don't just lose those meanings. They become empty and hollow.
That intro was the first time in like a year that any video has made me burst out in laughter, that mannequin just flew apart.
I have a 460 kit for a 1911 I've had good success with. Really need stout magazine springs to keep up with the slide velocity though. I'd be surprised if that's not the problem here.
When Matt and Scott get together they make some of the FUNNIEST intro's, lol.
The intros are fucking priceless as always! WHY ARE THEY ALWAYS SO GOOD LMFAO
Love your content brother so happy to see you in good health again!
There goes the windshield 🤣
"No one likes eggplant" *pew pew pew*
Animals know it’s DINNER TIIIIME when those gunshots go off lmaoo
That intro!! Haha awesome!! Scott you always come up with the best intro🤣🤣
25 seconds ago and I'm once again one of the first people in line for the double dose of action.
Way to go lads 👏🏻
Lookin' good, man, energetic as ever, almost no trace of that accident left by now.
So this thing is basically the Warthog from Halo, right? Looks like a lot of fun to ride:-)
The simple things in life are amazing like those little skits at the beginning of Kentucky ballistics videos.
“Gets his ammo from demolition ranch”
Cough cough 🤭
Love you Scott!!
The solution to the ammo shortage: Produce guns and ammo that the average gun pleb will never hear of so we can still get some ammo.
.45 has been out everywhere around me for A LONG TIME. So long I considered getting a reloading kit only to find out they're not able to be shipped in my damn state...
Hey Scott, something really near and dear to my heart here, I hope you see this. Whenever I eat eggplant, in any style, all I taste is this acidic bitterness that feels like it's eating away the inside of my mouth. That's all, thank you for all you do in terms of eggplant education.
Nothing gets me hyped up more than Scott shouting "It's watermelon time!" in slow motion.
2:45 "AND SCREW THOSE 8 FISH IN PARTICULAR!"
So glad your doing well my brother 🙏
PUT A THUMB IN IT.
The hardcast and penetrator won't expand at all in a tomato can, so nearly zero pop.
You'd need hollowpoints for that.
Scott’s accent is hilarious. He can’t say Rowland. It’s “row”, like “row, row, row, your boat”. Not “row” like a big, loud fight… hey… wait a minute!!
You're right on the pronunciation. I caught that as well. He IS from Kentucky. Lol
He's giggling like a schoolkid, can't blame him.
Props to you for your left-handed marksmanship.
You and your pops are the coolest duo. Can’t wait to have that kind of relationship with my lil dude when he’s grown.
That Glock is definitely something special! It looks really cool but it keeps jamming lol!
Awesome vid as always Scott! Ketchup wasn't eventful but Grisco was totally something to repeat! 💕
Ps. Matt keep doing it, first he rammed Tactical T-Rex and now you xD! Loved the intro! Sadly it had consequences to the poor truck lmao
Stronger magazine springs are recommended and even sold by the Rowland .460 people, it's possible Scott neglected to get those, in which case the magazine wouldn't always keep up with the slide.
Other people report no cycling problems with their converted Glocks or FNX pistols.
I would like to see the 460 vs 10mm since you can actually find 10mm ammo
Try the 45 super, also check out alaskan ballistics. They did that already! Also chukes outdoor adventures! They did a lot of testing . But that 45 super take your 45 acp and gives it 10mm power
@@theknightswhosayyeet5185 Right on I will check em out!
.460 blows it away. No comparison.
From those of us who have the incredibly rare allergy to tomatoes, I just wanna say. Thanks for shooting some. RIP any of us who love pizza.
Shouldn't pizza be fine as the heat of the stove destroys the allergenes (the things that cause the reaction)? At least that works for my allergy against apples.
What about garlic cream sauce instead of tomato
Best intro by far 🤣😭😭 Seriously you guys’ canners work and acting get better with each episode, and it’s like Christmas . You never know what the intro is going to be👊👍
Love this great too see you 2 together still amazed how well Scott doing since .50 incident top video respect earned scott
.460 Rowland has actually been around for a long time. About 12 years ago I had a chance to shoot a MPA .460, basically a Mac-10 on steroids, it was a blast.