Really great build, thank you for sharing. I can't say for sure but it looks like your wheel hubs have a 1/2" bore but the motor shaft is 3/8"? Did you print an adapter sleeve to fill the gap or did you use a bushing adapter of some sort? I am planning on printing an adapter out of PLA and am just curious if you took the same approach and if it worked for you. Thanks again, looks like a really great project.
Hi. Thank you. Yes, I used a steel spacer bought at the local hardware store (Lowes) and used it as an adapter sleeve. If you look closely at the hub you will see that spacer. Your approach of 3d printing it would also work.
😂thanks for more ideas 💡 Now I’m learning everyone ideas of how to build robotics I too just built a prototype But wanted to get better at it 🤣 I hope 🤞 mine will go crazy 😜😈 insane
thank you. this is exactly my thought also and I already stepped into making similar one. but using Wheelchair motors. and metal welded frame instead.
Great project. Thanks for sharing!
Thank you Andrii. And thank you for watching.
Awesome design, I like the design of your track tensioner I am going to steal it for the redesign of my first tracked vehicle.
Thank you notquitepinoy. And thank you for watching.
Really great build, thank you for sharing. I can't say for sure but it looks like your wheel hubs have a 1/2" bore but the motor shaft is 3/8"? Did you print an adapter sleeve to fill the gap or did you use a bushing adapter of some sort? I am planning on printing an adapter out of PLA and am just curious if you took the same approach and if it worked for you. Thanks again, looks like a really great project.
Hi. Thank you. Yes, I used a steel spacer bought at the local hardware store (Lowes) and used it as an adapter sleeve. If you look closely at the hub you will see that spacer. Your approach of 3d printing it would also work.
Pls provide link for motor driver used
Great ingenuity!
Thank you Sir
Good stuff, learned a lot. Thank you.
You have some good ideas there
Thank you Bruce.
Gran trabajo.
😂thanks for more ideas 💡
Now I’m learning everyone ideas of how to build robotics
I too just built a prototype
But wanted to get better at it
🤣 I hope 🤞 mine will go crazy 😜😈 insane
Your welcome. And welcome to the community of robotics.
Nice work, very impressive. Please can you share the 3d printed files?
Amazing
Great job!
Thank you.
NOICE 💪❤
Which motor driver boards are you using?
Question 🙋♂️ how many LBS is that robot weighing at ??
Trying to choose plywood or steel framing with aluminum covering.
18lbs.
Ty
Will you share the print files?
Sure. Provide me an email to send it to.
Nice build!
Thank you sir
wht type of esc did u use
Those are motor drivers not esc
What model of motor driver? @@prathamdeepsingh8210
@@sed1819 probably about 10-15a brushed motor drivers
can you please share the names of those components? thanks very much!
Hi, are you referring to the electronics?
Hi @@LyndonsWorkshop, I'm also curious about the electronics. Could you share the name of the motor drivers you use? Thanks!
@@amosto7862 Hi, its SyRen 10A motor controller. You could go for higher Amperage. You could also go for sabertooth motor controllers.
@@LyndonsWorkshop Thanks! I'll look into those
How much did it cost to build the robot? Roughly?