Final Shaping, Backplate & Spraying Ep 5 | Building a Boutique Hollow Body Baritone Guitar
ฝัง
- เผยแพร่เมื่อ 16 ก.ค. 2024
- #guitarbuilding #guitar #guitarbuilder #luthier
Welcome to Crimson Guitars th-cam.com/users/CrimsonC... and Ben's home workshop for Ben-ultimate episode of the edited-down guitar building extravaganza that raised over £15,000 for the British Red Cross DEC Ukraine Appeal.
donate.redcross.org.uk/appeal...
Check out the first edit here if you missed it earlier • Crowd Sourced Design! ...
Ben is making a custom backplate, the guitar takes a trip to the Crimson HQ spray booth and gets an inspirational fret level, crown and polish...
Thank you to House of Tone for the donated Pickups - www.houseoftonepickups.com/
And thank you Rosei for the inspiration - www.turnstoneguitar.co.uk/
Chapters:
0:00 Introduction
1:03 Reshaping this late in the game?
4:25 Placement of the controls & hardware
5:43 Thank you Skillshare
7:30 Setting the position of the Bridge
9:50 Drilling for the Bridge ground wire
12:20 Drilling & recessing the jack socket hole
14:45 Making the ebony backplate
16:20 Using the Triton router table to do the back rounder
17:45 Using the bandsaw to cut the shape of the back plate
18:09 Masking tape and super glue trick
18:45 Finessing the shape of the back plate on the Triton Router table
22:19 Relocating to the Crimson HQ Spray Booth
25:26 Improving on the classic Fret Level, Crown, and Polish
29:36 Who forgot to drill holes in the back plate before finish?
30:55 Painting on the Shielding Paint
31:50 Shaping the bone nut
35:20 Let’s get on with installing the hardware and tuners
38:50 Fitting the truss rod cover with magnets
41:50 I think we can call that a success!
Check out our new Discord server for Guitar Building Goodness here / discord
Join this channel to get access to perks:
/ @crimsoncustomguitars and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link luthiersquestiontime.buzzspro...
Ben's Livestream camera set up includes: the Blackmagic ATEM Mini Pro, Prime Cameras (Front facing and over the bench) Canon EOS 250D, suspended from the ceiling (bench side) Canon EOS 90D, and on the movable tripod a Canon M6 Mark II
www.cameracentreuk.com/crimson
Music used in this video from Epidemic Sound - www.epidemicsound.com/referra...
___________________________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - www.tritontools.com/en-GB
ISOtunes Bluetooth Hearing Protection - bit.ly/36YmKro
Wagner Meters - www.wagnermeters.com/
Leatherman - www.leatherman.co.uk/
Workshop Heaven - www.workshopheaven.com/
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for 10% OFF with this link: bit.ly/36YmKro
___________________________________________________________________________________
WEBSITE: www.crimsonguitars.com
VINTAGE TOOL SHOP: bit.ly/3oA8uQK
Luthier’s Tools & Supplies: bit.ly/LuthTools
Guitar Building Courses: bit.ly/LuthierySchool
Kit Guitars: bit.ly/KitGuitars
EXTRAS channel: bit.ly/3gQmul1
SOCIAL
Instagram - / crimsonguitars
Facebook - / crimsoncustomguitars
Patreon - / crimsonguitars
OTHER
Ben's Vintage Tool Shop - vintagetoolshop.com/
___________________________________________________________________________________
Thank you again for all your support, we really, really appreciate it! - Ben
Stay tuned and stay awesome!
___________________________________________________________________________________ - แนวปฏิบัติและการใช้ชีวิต
The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/crimsoncustomguitars06221
Simple design, yet so impressive with all its details. I love the finish on the hardware.
Great way of creating a depth stop for drilling, especially if you're doing more than just two holes is also heat shrink tube that's used in electronics.
When heated up with a lighter or soldering iron it contracts forming a tight connection with the drill, but is easily removable.
Since the drill has the spiral indentations it will go tighter in those and won't slipp.
The drill can withstand heat anyway as it has to get hot during drilling and if that happens the heat shrink will only get tighter, rather than when using adhesive tape, where the adhesive will loosen under heat.
Also it's easy to remove, cause you can just cut at the drills spiral.
Thank you, this is a great trick to share!
You’ve built so many beautiful guitars, but this one takes the cake !! Absolutely stunning instrument, can’t wait to hear you play it.
I love the sound of sped-up chiseling early in the morning. Sounds like victory.
Love the 12-hour guitar tee shirt! It's probably my favorite of your timed builds, definitely among your greatest designs.
Recently started building my first guitar: a sort of cigar box instrument but with a home-made box and a few more traditional elements like a set neck and thin, braced top. Thanks for all the inspiration!
Also, I suddenly need a baritone guitar.
Such a wonderful and beautiful guitar! Superb ideas in all details! My big congratulations to this built!
"The best way to cut bone..."
Another bit of knowledge for the budding serial killers among us.
Gorgeous build! Love the hardware, and the finish. Cool guitar, Ben!
Looking amazing so far, I love the hardware.
Ben I really salute you, and for those about to rock has to watch your videos, such inspiration and full of knowledge and fun and doing projects for humanity reasons it proofs how sincere kind person you are, god bless you and even my self after these years still learning from you every video thank you my good friend and bless you and your family.
Scrumptious looking guitar that!! I wasn’t however prepared for how this video ended 😆
Neither were we. DC
I was taught many years ago to always to place a plane on its side rather than sole down on the bench to avoid damaging the blade edge.
looks nice ! good job.
Enjoying this build, it was a stroke of Genius to put one of your builds in Dave Simpson hands. Truly a good idea, it sounds amazing.
My own very personal (and probably wrong) opinion is I would have made two cuts to thin the bottom horn: flattening from the bottom but keeping the waist width and reshaping the cutaway to keep the horn pointing more forward, but giving a more curved contour that side. The way Ben did it it looks a little too "sticky-outy" for my taste. The fretwork, however, is next level! Beautiful!
amazing work as always, gets me motivated to hit the work shop myself again. also: your wrist watch choices always impress me, speed master is always a classic . ;)
That hardware is glorious.
I really want a baritone, this was an excellent experience
Beautiful work and the Gotoh gear is excellent. Well done Ben
And the figured neck is superb mate
Beautiful guitar.
Man,this masterpiece can stop the war!!🙏♥️
Stunning guitar 👌👏👏
As always a very nice video Todd! Your neck is looking awesome, nice tips and tricks on the asymmetrical, but I'm not that far on shaping the neck, for now.
Peace and Long Life! 🖖
thank you Ben. suggestion on hole transfer punches work well better than a drill point . try them .
You seem to have access to some really beautiful wood nice job!
I just recently got a guitar for £30 at a car boot sale as it is a little beat up I thought I'll just give it a good clean up. and with one string missing just thought hey I'll get new strings a tuner and a pick. then when I went in to put on the new strings I noticed that the tremolo block had snapped apart so I can't install the new strings until I get the new block in place. oh and I did use to learn the guitar before moving over to drums then to DJ'ing but hey no harm in getting back in to playing guitar.
23:00 That Wood ❤️🔥
My current build is redwood top on sepele, i was able to bend the redwood to an American football shaped curve (not nearly as curved as one but that basic shape with the centerline the thickest part). I agree redwood is insanely soft but that’s what I love about it.
hi ben i use a vibrating multool saw to cut bone for guitar nut and saddles they work amazingly for processing the dog bones i use from the local waitrose
Take a look at the Dave Simpson video with Ben's Bog Oak guitar. Daves playing is amazing and really highlights the quality of the guitar.
She is beautiful like her style 🎸 🤘🤟😎
Those frets… coooorrrrrrrr
I love this Guitar ! but, I thought I heard you say this is the last video and we still haven't heard it play yet ? Don't tell me you are going to give this away and we don't get to hear it ? This may start a riot !!! LOL
Well, it is the Ben-ultimate episode of this build series. Which means there should be at least one more episode coming our way.
@@Timberwolf69 touche
You must be new here… 😉
(It’s never the last episode…)
"It's NEVER the last Episode!" That should be on a t-shirt - TC
Say you have a bone or piece of antler. What is the best way to get it into the shape of a nut, that is, with two parallel sides perpendicaular to a flat bottom?
How do you round the fret board edges/sides to give that worn in feel?
Ben, Awesome work as usual, Could you tell me what make are those drill bits?? I have looked online for bits that look like that but I’m having no luck finding them. Thanks.👍👍🎸🎹🎼👨🏻🦯👨🏻🦯
Brad Point but I also use Famag. Ben
Is that flash coat something I could procure for myself?
🤔 Quote from 0:03 "welcome to the finale episode" will this become a running gag 🙈
Going forward this will be the intro for video one of every series........ to keep you on your toes. So says the editor, but this is Crimson. Anything could happen!
Whats stop tail do you use?
What's the router table set up please good sir?
what kind of distance are you talking about when offsetting the bridge on the bass side? last time I didn't know about this when installing a tune-o-matic and my intonation is way off. but I found several sources saying you need to offset both sides a little, and it's confusing to me. some even say to put the treble side forwards by 1.5mm, but I doubt that. I also have a neck break angle of about 2°.
Treble side 1mm forward, bass 2mm back if using 10 gauge strings. Ben
Do not try to drill the holes for the threaded bridge post inserts by hand if it is your first time.
I love the idea of a magnetic truss rod cover, but the idea of putting strong neodymium magnets near pots, wires, pick ups, switches, etc... seems like a really bad idea.
What the heck? I just watched 45 minutes.... It felt like 5 minutes!
Stupid (?) question for Ben: What kind of drill bits are you using to drill out the bridge mountings?
They seem to have a much squarer end profile that anything I have seen here in the US.
They look like some manner of Brad Point bits; great for drilling clean accurate holes
Brad Point bits. These are by Star M but I also use Famag a lot. Ben
37:30 Ben "I'm sort of regretting this is not my guitar"
Yeah, we know. At some point in EVERY build you say the same!!
AND, we ALL say it!!
Do you ever build a guitar using a Zero Fret?
Not really: he's mentioned a couple times over the years why he doesn't like zero frets all that much
Maybe in the future, try releasing videos in order so that we don’t watch a whole video that spoils the finish of the guitar before we watch it
First 👍👍👍
edit the recording and make it "your" guitar!
Anyone know's about Ben's instagram please???
@therealbencrowe on Instagram.. though I currently suck on that platform!
@@CrimsonCustomGuitars Thanks master💪😊
Wipe away superglue with your fingers??!!!
Yes, if only to have the pleasure of peeling it off later!
@@ianthomson9363 your skin you mean? 😄
Why has all that glue not been removed from the cavity!! It looks disgusting.
"Pillar drill"? Pff. In the US we use the proper name: big standy-uppy hole-maker thingy.
Ben you’re quite cheerful this week considering you’ve just been sentenced to death by the Russians seems a bit harsh for building a charity baritone
Dammit, quit rubbing our noses in your crank/dogleg chisel. Rarer than an honest politician and twice as expensive.
Wait, wouldn't an honest politician cost less than a normal one? Or at least be a better value for the money?
@@U014B you always pay for quality
Right now the Vintage Tool Shop has 5 cranked chisels: shop@vintagetoolshop.com DC
@@CrimsonCustomGuitars wow, thank you for checking, mighty neighbourly you! Also thanks for the two ebony fretboards. International shipping on those was greased lightning fast.
You built a guitar with a Banderite Nazi symbol on it? WTF? You can call it the Banderitone.