Ingenious Extreme Production of Huge Industrial Gear with Limited Tools | Largest Industrial Gear

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 มิ.ย. 2024
  • Ingenious Extreme Production of Huge Industrial Gear with Limited Tools | Largest Industrial Gear
    Gears can be manufactured by a variety of processes, including casting, forging, extrusion, powder metallurgy, and blanking. Of these, machining is the most common manufacturing method used. Gear machining is further classified into two categories: gear generating and gear form-cutting.
    Gear broaching, machining, and hobbing are three of the most common gear manufacturing methods. Looking in detail at these types of gear manufacturing methods to get a good look at everything that goes into the production and manufacturing of gears.
    There's an endless number of different materials that can be used to create gears, but as a general rule, cast iron, steel, brass, bronze and plastic are the most common materials used for gears with cut teeth.
    #gearmanufacturing
    #largestgear
    #biggearmaking
    #makinggear
    #largegear
    #wonderingskills
  • ยานยนต์และพาหนะ

ความคิดเห็น • 23

  • @NapierNimbus
    @NapierNimbus 26 วันที่ผ่านมา +12

    Liked all of this video. The cold rolling at start was so worried the flapping of his tunic would get caught in the exposed drive belts of neighbouring machine

  • @ashokkumarnarayan1924
    @ashokkumarnarayan1924 2 วันที่ผ่านมา +1

    I would like to see them harden the gear and perform profile grinding.

  • @user-ii2dg3dw9j
    @user-ii2dg3dw9j 25 วันที่ผ่านมา +2

    Все могут.Завернули в кольцо такой толстый кусок металла.Молодцы.

  • @dagobertoandrade9636
    @dagobertoandrade9636 26 วันที่ผ่านมา +3

    Brutal trabajo, felicidades por es ardua labor Dios les bendiga

  • @adybarker4733
    @adybarker4733 วันที่ผ่านมา +1

    11:15 I see a lot of this upward cutting on lathes in these vids. It's totally wrong to do that, the forces should be directed down into the bed, not away from it.

  • @JayeshbhaiNayak-uo8mg
    @JayeshbhaiNayak-uo8mg 11 วันที่ผ่านมา +2

    Lath machine is a veryold but proofabal thanks ❤

  • @mtang65
    @mtang65 17 วันที่ผ่านมา +1

    I’ve been watching these videos from this part of the world and the first time I’ve seen a guy wearing pants, button up shirts, shoes and using gloves. Did he got transported from somewhere else?

  • @CreativeTalent1
    @CreativeTalent1 25 วันที่ผ่านมา +2

    Thank you dear for sharing this type of stuff ❤

  • @hermanschijf21
    @hermanschijf21 5 ชั่วโมงที่ผ่านมา +1

    Oke

  • @HSKAYU
    @HSKAYU 2 วันที่ผ่านมา +1

    Salam woodworking Indonesian

    • @wonderingskills1
      @wonderingskills1  2 วันที่ผ่านมา +1

      Waalaikumussalam

    • @HSKAYU
      @HSKAYU 2 วันที่ผ่านมา

      @@wonderingskills1 semoga sehat dan sukses selalu

  • @luanferreira-nh2em
    @luanferreira-nh2em 24 วันที่ผ่านมา +2

    Sensacional gostei de mais valeu👍👏

  • @felixacuna4139
    @felixacuna4139 20 วันที่ผ่านมา +1

    Como es posible que trabajen en estas condiciones, trabajo totalmente inseguro, comenzando por el taller desorden, insalubre, ropa inadecuado para este tipo de trabajo, sin zapatos de seguridad, sin guantes de seguridad, sin cascos, no hay zonas de marcadas por donde caminar, horrible

  • @ronaldsmith4153
    @ronaldsmith4153 6 วันที่ผ่านมา +1

    Welcome to our modern production facility.

  • @georgk4207
    @georgk4207 13 วันที่ผ่านมา +1

    Error after error correction not build-up slow not x-rayed no annealing after welding and the pre-turned parts without safely without wood / rubber transport😵yes then the module milling went from 2 work steps first pre-milling and second finishing milling and before clamping is roughly deburred so that all fingers stay on it. I don't know as a customer I would go and look for a higher quality manufacturer

  • @Jurek-xe3tr
    @Jurek-xe3tr 8 วันที่ผ่านมา +1

    Czy oni kiedykolwiek zmodernizują ten park maszynowy? Czy bedą to naprawiać spawarka i młotkiem?