top 10 things every SIGN PAINTER needs in their box | TIPS & TRICKS | sign painting and signwriting.
ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2024
- I discuss my most important sign painting tools and materials.
For more sign painting & lettering art, subscribe to my page!
Thanks,
The letter head
email: theletterhead@outlook.com
For my work at the Traditional Sign Painting Company,
www.traditionalsignpainting.ca
A close up of each brush would help
I saw a sign painter using small magnets to hold his patterns while he used a pounce pad and I thought that's a really cool idea for steel etc surfaces.
Hi tiller. A great idea, I've seen people use them before on cars and felt silly that i never tried it. Will do it one day, just for the kicks!
Super cool to see what you personally carry in the box! And straight up, wearing a glove on your pot hand/palette hand is just the right thing to do.
USE TAPE... If you have some, why wouldn't you want the cleanest lines? And just like you said, the customer won't give two thoughts about how it's done. They will however think about the finished project for a long, long time. That's what they pay for!
If you have something to prove, enter a competition. Fun for the rest of us!
Thanks again for sharing all of your tips. Can't wait for the next video!
Cheers
Hi chris! Hope your well. Thanks for your comment. It was nice to do something different, and I hope it was useful!
@@theletterhead Yes, indeed it was! Always cool to see what someone else might have in their box! I used to carry a soy sauce bottle for my thinner/spirits. Eventually the small hole became larger and larger... But it worked for a long while, giving me a lot of slow flow control. Also, as just a really inexpensive trick I would always put a piece of plastic wrap on the bottle and then replace the cap. I never had any issue with spills or evaporation while in transport. Just a cheap way to ensure the seal is nice and tight.
Looking forward to the next project!
Stay well!
Great video!
Good suggestions. I use an old magazine as a palette, lots of pages and when I get to the end, I just toss it away.
Thabks Rick! I have so many sign media magazines I can use too 😅
This was great thanks!!!
Thank you! Glad you enjoyed it.
A paint can opener might come in handy to add to your toolbox as well...
Yeah I forgot that. I always knew there would be something!
i found a 1970s steel medic first aid box with nice patina ,,filp down front panel fold out trays and compartments and its perfect for my sign writing kit,i even pinstriped it up ,love your videos buddy, am in a steam village in OZ and the signs are computer cut junk , i intend to fix up the train station signs and community bar and historical general store in town ,master painter by trade now trying my hand at sign writing so far i find it very satisfying and challenging at same time ,
Thats awesome! Would love to see it.
Thanks for enjoying the videos mate. Yeah the newer sign companies often lack in knowledge of lettering and it really shows. Good luck with all your projects mate.
Feel free to send em in to the email address I have on here when they're done!
Great to be able to tap your knowledge. Thank u sir
Thanks Jeff!
One thing about one-shot paint is, the can. Once it's open, you all-all-always get a major dried up crust on the surface. Because the cans in and of themselves, suck. I think. So if you have a suggestion to what we can pour the paint over in, so it won't dry up. That'll be a GREAT help. Other than that. Cool little upload :-)
Yeah it's the bane of all sign painters! I've heard people put a screw through the top and pour it out and put the screw back. I've heard that works well, never tried it though
@@theletterhead I've seearched forever for some plastic containers. It just sucks that the lit on one shot, as soon as it's open, it can never fully close, which makes it, in my eyes, some very expensive paint and a giant waste. I'll look for something, there has to be SOMEthing on this planet. Oh well. Do you know where it's possible to pick up some cool template letters to use as a base for a piece?
I have had luck putting a screw in the lid and a nut or two to make it into a rattle can. I put two screws in the lid on opposite ends. One I take out to pour out the paint and the other I loosen to let in air so it flows smoother.
@@user-cd9rd3si8q Not a bad idea! Thanks man! :)
I was in the sign trade for 30 years. When you open a can of paint, before you pour any out, tap a few holes all along the channel into which the lid seats. Use a nail or a small flat screwdriver...tapping with a hammer on either the nail or the screwdriver.
Then, after you've poured out the paint, any remaining paint drains back down into the can. When you pound the lid back on, there should be nothing to splash back out at you. (But use a rag on top of the can, just in case.)
Excellent video, may I suggest using a lithium grease instead of oil, the grease retains the chisel shape when the brush is not in use. Also pounces are useful for repeat works, I used to letter commercial vehicles, fleets of 20 or more, so positioning is essential and this is best done with pounces.
Hi Robert,
I've never heard of using lithium grease. Will definitely look into that!
Yeah I should have mentioned that about pounces too. I was always bound to miss out a bunch of stuff!
@@theletterhead Any kind of grease will do, it's just lithium grease is slightly thinner than others, and like I say it holds a nice chiseled shape to your brushes when not in use 👍🏼
Can you show the construction of your tool box. Dimensions etc. thanks
Hi Gerry, sure! I may try to do that this weekend if I can
There are so many different sorts of brushes and I can get a general idea of what they’re for by their shape. But what would be your choice for a beginner who’s wanting to learn this trade? If you could choose 2 of what you think are the best brushes for lettering, what would they be?
Just after recording this video I recieved some new brushes. Im looking to get a few more and then will do a video on them all. Showing their pros and cons.
Hi! Do you use wood primer on the wood sign??and do you also use a clear coat after the sign is done!? thank you!!
I use a primer. But not clear coat.
@@theletterhead thank you
Hi can you advise me please. I can't get hold of one shot and because I live in Ireland, no one will ship paints out to me. Ive been told a local shop can get me 'unica' enamel paint which can be reduced with white spirit. Can I use this or any other enamel paint on the market ( in Ireland ) Thanks.
Hiya, not sure what you can get there. I use ronan lettering enamels now since I can't get 1shot. I'm based in canada now though.
What is the ratio you reduce your paint for lettering? Tattooing 10 years now I’m pushing into sign painting but no one is local to learn under 😢😅
It's hard to say. It takes a bit to get used to but I try to get runny enough to spread well but still with a bit of "grip" to the surface when painting.
There are a few sign painting groups on facebook for people all around the world, you never know!
Can you tell me where you got the box!
Hi racquel,
The box was made by my dad to replicate the one he made himself when he started years ago.
Unfortunately I don't know of any place that sells them like this.
Although this is a custom box, Handover do a pretty nice box although not as nice as this one.
Ronan are American aren't they? Is there nowhere here in the UK?
I think they are American. Their is probably some way of getting it in the UK though. Alphanamel is another brand you might try if you can't get ronan. Although I havent used them myself.
@@theletterhead Thanks for that TLH. I've tried Alphanamel. I found it not to be all that good. Thanks again.
Great, but I can't hear you that good because of the music over the voice..
I think it's really interesting, so maybe you could upload again without all the music...
Hi there, really sorry you can't hear the speaking. I tried to make sure that the music was very quiet, and tested it on many devices.
If I do more stuff like this I will bear it in mind and keep the music lower or cut it.
I was with you, until the unnecessary music kicked in. Too loud. Can’t really hear you clearly.
Hi mate, I do try to have the music as low as possible, but I'm sorry it's a problem for ya mate