Electrical Power System Harmonics Explained

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ม.ค. 2025

ความคิดเห็น • 53

  • @carpetsmell2523
    @carpetsmell2523 4 ปีที่แล้ว +10

    Thank you Jim! This really just explained everything. I (17) am currently an exchange student in Germany, and its hard for me to understand everything that the teacher says. Videos like this are rare. I have a test tomorrow, wish me luck Jim!

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว +3

      Aaron Kamalkhani I am glad you found the video helpful. I wish you well on your test tomorrow.

  • @akirk1573
    @akirk1573 2 ปีที่แล้ว +2

    i was looking for harmonics relative to a song on guitar, and now my brain has flashburn.

  • @cubaindy6700
    @cubaindy6700 ปีที่แล้ว +1

    You sir, are an excellent explainer of things.

  • @DMerenguelli
    @DMerenguelli 8 ปีที่แล้ว +9

    Simple and to the point!

  • @danox1998
    @danox1998 2 ปีที่แล้ว

    Great video this! Straight to the point!

  • @vincentallardmentoratcoach4405
    @vincentallardmentoratcoach4405 2 ปีที่แล้ว

    Thanks !! How to Create a Six-Pulse Waveform ?

  • @edgehodl4832
    @edgehodl4832 3 ปีที่แล้ว +1

    great video, thank you!

  • @muhammadnoumankhan9735
    @muhammadnoumankhan9735 4 ปีที่แล้ว +2

    How we can say that the load is actually causing a perfect 5th or 7th harmonic?

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว +3

      There are a couple of ways to determine the harmonics being produced by a load.
      1) is to measure the specific load with a harmonic meter. The measurements will show which harmonics are there.
      2) Computer simulations performed before equipment is installed may use one of several different models depending on the load. For example, loads with 6, 12, 18 pulse equipment create a predictable pattern of harmonics.
      Most harmonic software has these models as part of their modeling software. Great question!

  • @sabeelm9
    @sabeelm9 5 ปีที่แล้ว +1

    Beautifully explained, thank you

  • @hims5205
    @hims5205 6 ปีที่แล้ว +2

    very beautifully explained .thankyou sir

  • @Rico702Vegas
    @Rico702Vegas 4 ปีที่แล้ว +1

    Fantastic sir!! Bless you.

  • @qzorn4440
    @qzorn4440 3 ปีที่แล้ว

    very interesting subject with all the inverters going on the grid.. wind, solar, ac motor-inverters, electric vehicle large battery charger inverters... dirty power, burn-outs. thanks...:)

  • @brownbearboxproductions3458
    @brownbearboxproductions3458 3 ปีที่แล้ว +1

    Could you use harmonics to stabilise electromagnetic energy? Or a field?

  • @muhammadnoumankhan9735
    @muhammadnoumankhan9735 4 ปีที่แล้ว +1

    Supoose if the load was continuously changing and it was becoming the cause of 5th harmonic now lets suppose if the load is turned off where will go that superimposed 5th hormonics based wave shape?

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว +1

      When the harmonic producing load is switched off, the harmonics go away. Harmonics are treated as a constant current source based on the load (and the load being on) The design of harmonic filters (if used) need to take this into account.
      The most complex design I was involved with was in the 1980's (yes a few years under my belt) It was a large arc furnace for steel production. The arcing was creating harmonics and voltage flicker back at the utility substation. lt was like hitting a moving target since the magnitude and harmonic order kept changing with the random arcing of the furnace.
      The solution involved designing and constructing a static var compensator (SVC) This is a capacitor bank with thyristor controlled reactors in series and the compensation would change on a cycle by cycle basis. (probably more than you cared to know but since we were on the subject....)
      Thanks for the question!

  • @reuvenmoshe6712
    @reuvenmoshe6712 2 ปีที่แล้ว

    what is the precentage on the waves (39%)?

  • @shanegee6165
    @shanegee6165 4 ปีที่แล้ว +1

    What does he mean about the 5th harmonic? Why are they numbered?

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว

      They are numbered to identify which harmonic frequency. They are based on a "fundamental" frequency for power systems that is 50 or 60 Hz. The 5th harmonic is a frequency of 5 x 60 Hz or 300 Hz. Thanks for watching. - Jim

    • @xy2144
      @xy2144 4 ปีที่แล้ว

      Think of a guitar string. Pluck that particular open string; that’s the fundamental frequency (1st harmonic).
      Now place your finger tip exactly at the mid point to divide the string in half (do not depress the string, just place fingertip there) pluck again.. that pitch frequently is the 2nd harmonic.. next divide the string in 3rds, 4ths, 5ths, etc.. the subdivision of the length is where the harmonic nodes live. The frequency multiplies with each wavelength subdivision because the wave gets shorter, hence higher frequency. This happens naturally. God’s design! 🤓

  • @danh6486
    @danh6486 5 ปีที่แล้ว +1

    Would you happen to have any information on the workings of harmonics and spurious transmissions together?

  • @danh6486
    @danh6486 5 ปีที่แล้ว

    If I have a 10MHZ signal that is meant to be a system clock, how will harmonics affect it if i know the 10mhz will keep its signal characteristics through out the system?

  • @zeddpilsner4
    @zeddpilsner4 2 วันที่ผ่านมา

    you didnt explain what causes harmonics, what problems occur when you have harmonics or what to do to resolve them

    • @Brainfiller
      @Brainfiller  2 วันที่ผ่านมา

      Thanks for your comment. This was only a very high level of what they are. I cover the details such as sources, resonance, problems, filter design etc. in my 6 hour class on harmonics.

  • @Vekna666
    @Vekna666 9 ปีที่แล้ว +1

    great explanation!

  • @ManojKumar-jw5ys
    @ManojKumar-jw5ys 4 ปีที่แล้ว +1

    thank you sir

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว

      You are quite welcome!

  • @abrhaleygoitom3589
    @abrhaleygoitom3589 6 ปีที่แล้ว

    how we can check the hormonics using the power world software

    • @Brainfiller
      @Brainfiller  6 ปีที่แล้ว

      Software for harmonic modeling is to create predictive models and you would want to consult the software companies. Software for evaluating measurements, requires measurement equipment.

  • @EngrTahirSaleem
    @EngrTahirSaleem 4 ปีที่แล้ว +1

    Thanks

  • @ferdibolat4311
    @ferdibolat4311 5 ปีที่แล้ว +1

    Thanks a million, sir :)

  • @LIM_Khuan
    @LIM_Khuan ปีที่แล้ว

    thanks , is great

  • @sergiokaminotanjo
    @sergiokaminotanjo 7 ปีที่แล้ว

    Professor, what could cause them in, and why do they matter?

    • @Brainfiller
      @Brainfiller  7 ปีที่แล้ว +2

      Harmonics are mostly from what are known as non-linear loads. i.e. loads that distort the current such as inverters, motor drives etc. Distorted current can increase the heat and result to thermal degradation. When significant harmonics are present, they can result in voltage distortion. The situation becomes worse if there are capacitors on the system. The power system behaves as mostly inductive but with capacitance, it now behaves like an LC circuit with resonance. If a harmonic frequency is on or near a resonance frequency, there can be a whole array of problem, overheating, equipment misoperation, failures etc.

    • @sergiokaminotanjo
      @sergiokaminotanjo 7 ปีที่แล้ว

      oh ok, so let say, l may be having some issues related to this harmonics affecting my Computer and monitor, if l plug them to a generic ups that has solve it right?

    • @slipnorris5882
      @slipnorris5882 7 ปีที่แล้ว

      so would you say harmonics are not ever used on purpose, they are the result of a distorted component causing the harmonic?

    • @sergiokaminotanjo
      @sergiokaminotanjo 7 ปีที่แล้ว

      well, not in electricity, but in Music they are used on purpose :P

  • @peterturner2205
    @peterturner2205 6 ปีที่แล้ว

    A question (perhaps a dumb one, I don't know):
    Why only consider waves of harmonic frequencies? Surely waves of all frequencies that are somehow introduced by loads will act to distort the main signal? Is it just because it makes it easier to do the maths?
    I get that the harmonic ones will be 'worse' as their peaks/troughs are in sync with the main ones peak. But surely all frequency signals will also have a large effect? What am I not getting?

    • @JulesBartow
      @JulesBartow 6 ปีที่แล้ว

      The part you're not getting is "Even Harmonics", for a reason. Surely you are wrong about all frequency signals having a large effect.
      In Korea they do their math Gangnam Style.
      After you've done your math Fourier Style in detail (referred to in this video ) you will confirm whether your question is a dumb one, or not. Please let us know what you found out as an ode to Socrates.

    • @Brainfiller
      @Brainfiller  6 ปีที่แล้ว +3

      Good question. The primary cause of power system harmonics is the characteristic of the load where the current is non-linear often due to SCR's, diodes and other switching devices. Most loads like drives, 3 phase UPS etc. have a predictable pattern that is made up of odd harmonics, and not all odds are included.
      Even harmonics can exist but are not as common. They will skew the wave shape left or right giving it an asymmetrical shape about the axis (90 degrees and 270 degrees) Even harmonics are sometimes an indication that there is a problem with the load, i.e. diode, SCR etc.
      I have also measured non-integer harmonics in the past which can be from a "random" load characteristic such as an electric arc furnace. These types of loads have such an erratic current from the arcing that the harmonic content is continually changing and include non-integers such as 4.3, 5.1 7.6 etc. Those numbers that I listed are random examples - the actual harmonics are all over the map for a furnace.

  • @bunhengsuoy4518
    @bunhengsuoy4518 7 ปีที่แล้ว

    Dear sir I have some question to ask you. I would like to ask you about industrial MV capacitor bank. I would like to write my thesis related to MV capacitor bank that install at 'Tiger beer brewery limited'. I would like to ask some recommendation or do you have some documents related to MV capacitor bank? Could you send it to me? What step that i should follow? What kind of methodology or procedure? Does detuned reactor function both as filter and irrush current limited?
    Best regard
    SUOY Bunheng

  • @altuber99_athlete
    @altuber99_athlete 3 ปีที่แล้ว +1

    Well, saying "harmonics are a multiple of the fundamental frequency" doesn't make much sense. A more accurate definition would be "harmonics are sinusoids *whose frequency* is an integer multiple of the fundamental frequency".

  • @noel7777noel
    @noel7777noel 2 วันที่ผ่านมา +1

    What CAUSES harmonics.
    An electrician wired a wye motor to a delta transformer.
    Or an electrician wiring a single load to 208. With 208 having two transformer windings and connecting both windings to single load. Thus forcing two different windings of that transformer to draw the same current at the same time.
    One would want to connect a single phase water heater to 277 vs 480. To connect one load to one windings of the transformer feeding said single load.
    Its not a good idea to force two different windings of a transformer to draw the same current at the same time. One will become to feedback. Harmonics

    • @Brainfiller
      @Brainfiller  2 วันที่ผ่านมา

      Thanks for your comment. The cause of harmonics is mostly from non-linear loads. As in, any kind of load that has a distorted current. Adjustable Speed Drives, rectifiers, arcing devices and many other devices. The power system components respond to the the frequencies and magnitude that when added together result in the distorted current. Yup - Fourier Analysis.

  • @9908vikram
    @9908vikram 8 ปีที่แล้ว

    thank you

    • @Brainfiller
      @Brainfiller  4 ปีที่แล้ว

      A meter would show a distorted waveform but would not indicate which harmonics. There are certain signature wave shapes that are an indicator of specific harmonics. As an example a sine wave that is flattened on top is usually the result of a 3rd harmonic component.

  • @GeexAtWork
    @GeexAtWork 5 ปีที่แล้ว

    In other words; the resulting waveform due to the effects of the load???

    • @Brainfiller
      @Brainfiller  5 ปีที่แล้ว +1

      Yes. Loads like VFD's distort the current which results in the additional frequencies.

  • @busraahmed1708
    @busraahmed1708 2 ปีที่แล้ว

    high level english