HDPE PIPE WELDING MACHINE HDPE PIPE JOINTING MACHINE BUTT FUSION WELDING MACHINE, Butt Fusion Joint,

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.พ. 2021
  • Generally speaking, HDPE pipe is butt fused by applying heat to prepared pipe ends and then pushing the pipe ends together with a pre-determined force to make a permanent butt fusion joint. It is a very simple process utilizing a properly sized butt fusion machine for the pipe size to be joined. The pipe is installed and clamped in the butt fusion machine with pipe supports on both ends of the machine to support the pipes on the machine center line. The pipe ends are then faced (machined) to mechanical stops to ensure clean, parallel pipe ends for the heating process. The pipe ends are then aligned using the clamps on the fusion machine. A temperature controlled heater is installed in the machine and the pipe ends are heated according to the butt fusion standard ASTM International F2620. Once the heating criteria is met, the heater is removed and the pipe ends are brought together at the pre-determined force. This force is held on the joint for the time required by the standard. At this point, the pipe can be removed from the machine and visually inspected before pulling down the pipeline.
    #adchohan

ความคิดเห็น • 97

  • @akashmunshi4580
    @akashmunshi4580 23 วันที่ผ่านมา +1

    Good

  • @deenpanahiadbisangat243
    @deenpanahiadbisangat243 3 ปีที่แล้ว +1

    so nice video

  • @jawadhaider2720
    @jawadhaider2720 ปีที่แล้ว +1

    Very good

  • @DeepakGupta-cw7ez
    @DeepakGupta-cw7ez 3 ปีที่แล้ว +6

    Thanks sir 👍
    Very Helpful

  • @V1670RY
    @V1670RY ปีที่แล้ว +1

    Good weld. Not inside trench more space to work.

  • @AbdulMajid-tl5vk
    @AbdulMajid-tl5vk 3 ปีที่แล้ว

    Great job

  • @yessss-squad9459
    @yessss-squad9459 หลายเดือนก่อน

    After the completed the work ,Can be clamp installation?

  • @dbiswajit126
    @dbiswajit126 11 หลายเดือนก่อน +1

    Interview me ek question tha heater use ke bad pipe ko kitna kg pressure dena chahiye joint karne ke liye ?

  • @FAZALMEHMOOD-ds2cb
    @FAZALMEHMOOD-ds2cb 2 หลายเดือนก่อน

    ماشاءاللہ

  • @rahulKumar-zl5un
    @rahulKumar-zl5un ปีที่แล้ว

    Heater voltage ⚡ how much or current is DC or AC working please inform

  • @lalchandchand6119
    @lalchandchand6119 22 วันที่ผ่านมา

    सर क्या सिरसा हरियाणा में मिल जाती है क्या यह मशीन

  • @Shorts24ur7
    @Shorts24ur7 21 วันที่ผ่านมา

    Apka mesin ka pipe Kato?

  • @shamsuddeen5785
    @shamsuddeen5785 ปีที่แล้ว

    Machine ka orice kya hai 250mm ka hai but you may give fir 300 as well

  • @anuragwalawalkar8713
    @anuragwalawalkar8713 หลายเดือนก่อน

    Which brand ??

  • @piping2024
    @piping2024 3 หลายเดือนก่อน

    🙏🙏

  • @diaryofmemory6387
    @diaryofmemory6387 ปีที่แล้ว

    temperature kitna dena hey??

  • @ajit20896
    @ajit20896 11 หลายเดือนก่อน

    7.5kv

  • @azeem5269
    @azeem5269 11 หลายเดือนก่อน +1

    Very nice and very interesting

    • @CivilWork
      @CivilWork  11 หลายเดือนก่อน

      Thanks dear

  • @hridaysk6884
    @hridaysk6884 9 หลายเดือนก่อน

    Mero ko kam siknahe kidhar jana pore ga

  • @biswanath1603
    @biswanath1603 ปีที่แล้ว

    Sir mujhe ek fiter ki joruri hai . Aap ke pas hai kya

  • @HussainBaloch-lj4xj
    @HussainBaloch-lj4xj ปีที่แล้ว

    Ye milti kaha se hai

  • @narendratiwari7687
    @narendratiwari7687 2 ปีที่แล้ว +2

    कितने के बी ए का जेनरेटर लगता है इसको चलाने के लिए

  • @santhiswarupmanugula5768
    @santhiswarupmanugula5768 ปีที่แล้ว

    cost of machine

  • @dbiswajit126
    @dbiswajit126 11 หลายเดือนก่อน

    2nd question:- PN Rating kitna hai

  • @daleepsihag7256
    @daleepsihag7256 ปีที่แล้ว

    I am interested sir
    Mahin mujhe Leni hai kha milegi kya praise h

  • @amitaich5413
    @amitaich5413 ปีที่แล้ว

    Doing with quality till 1000 mm dia

  • @user-zp8zk4sp1i
    @user-zp8zk4sp1i ปีที่แล้ว

    Which one is the best brand to buy

    • @a30julycod
      @a30julycod 10 หลายเดือนก่อน

      Hurner Schweisstechnik Gulf

  • @nivruttikshirsagar2260
    @nivruttikshirsagar2260 ปีที่แล้ว

    सर, क्या आप मुझसे व्हाट्स अप पे जाँईन हो सकते है? मै मशिन खरीद ना चाहता हूं।

  • @AshokKumar-pp2vm
    @AshokKumar-pp2vm ปีที่แล้ว

    Sir eska price kitna hai

  • @kamleshkumar-yc9jd
    @kamleshkumar-yc9jd 10 หลายเดือนก่อน

    Temp of heater?

    • @jayma2733
      @jayma2733 9 หลายเดือนก่อน

      Melting point of HDPE is 135°C (275°F) so most likely that temp or higher to speed up the process.

  • @coolhot6231
    @coolhot6231 3 ปีที่แล้ว +1

    Buhat hi bihtareen video thanks bai sahib bai please apna numbar de day

  • @saravananmech4189
    @saravananmech4189 2 ปีที่แล้ว +1

    What is the cooling time

  • @user-rl5rm1sz5v
    @user-rl5rm1sz5v 5 หลายเดือนก่อน +1

    ❤ Bonsoir monsieur svp je peux connaître les prix des machines ? 63 à 315

    • @CivilWork
      @CivilWork  5 หลายเดือนก่อน

      cher, je ne connais pas les prix mais tu peux vérifier le marché dans ton pays mercies

  • @princprinc2315
    @princprinc2315 2 ปีที่แล้ว +1

    Heet Kitna time tk Dyna hy bhai

    • @merabharatmahan2543
      @merabharatmahan2543 2 ปีที่แล้ว

      Yeh pipe par nirbhar hai 90par 2 se 3 minutes lagte hai jab heating plate full heat hojaye to

  • @sarfarazmemon5516
    @sarfarazmemon5516 3 ปีที่แล้ว +1

    I want Civil works expert for some pipe line fitting

  • @user-ih4bv9no6n
    @user-ih4bv9no6n 6 หลายเดือนก่อน

    Go

  • @durbadalmirdhamirdha337
    @durbadalmirdhamirdha337 2 ปีที่แล้ว

    HDPE PIPE WELDING FEL,NO SASYA

  • @asrantitopno5480
    @asrantitopno5480 2 ปีที่แล้ว +1

    Masin ka parts ka name bhi dalo

  • @HardipsinhHardip-sg9fo
    @HardipsinhHardip-sg9fo 9 หลายเดือนก่อน

    Yeh pipe Leni nahi chahiye

  • @ziaullahjan4984
    @ziaullahjan4984 2 ปีที่แล้ว

    Dear sir how much price in this Machen in pakistan

    • @sohail01101
      @sohail01101 2 ปีที่แล้ว

      this is chinese machine 300mm price is 900000 , i have useed korean like new with one year warranty ..only 720000rs

    • @birjeshkumarji3365
      @birjeshkumarji3365 ปีที่แล้ว

      Ye sir loudabatafege jo ki machine ke bare me malum hi nhi i work amiantit oman commonly your father butt fusion

  • @riazmalik2956
    @riazmalik2956 ปีที่แล้ว +1

    What are the labour rates for joining and installation of 25, 30, 40, 50, 65, 80, 100, 125, 150, 200 & 250 mm diameter pipes?

  • @rajverma9809
    @rajverma9809 ปีที่แล้ว +1

    Mujhe jointer ki jarurt hai

    • @indrapal6470
      @indrapal6470 10 หลายเดือนก่อน

      Kaha SE hai aap contact no

    • @rajverma9809
      @rajverma9809 10 หลายเดือนก่อน

      @@indrapal6470 lucknow

    • @AzamKhan-kb3gt
      @AzamKhan-kb3gt 4 หลายเดือนก่อน

      @@indrapal6470phone no

  • @rajeeshraj5626
    @rajeeshraj5626 3 ปีที่แล้ว

    How much price

    • @Cherry-xu
      @Cherry-xu 3 ปีที่แล้ว

      Dear sir, you can reach me by WhatsApp: +8617805890907 or email: cherry@welping.cn

    • @ziaullahjan4984
      @ziaullahjan4984 2 ปีที่แล้ว

      @@Cherry-xu Hello sir how much price

    • @merabharatmahan2543
      @merabharatmahan2543 2 ปีที่แล้ว

      Yeh nirbhar karta 😘hai aapke Dia se isme fully automatic hai aur manual bhi

  • @ShivamSingh-ri8gf
    @ShivamSingh-ri8gf 3 ปีที่แล้ว

    Iska price kitna hai

  • @durbadalmirdhamirdha337
    @durbadalmirdhamirdha337 2 ปีที่แล้ว

    Jind fel

  • @Ayubkhan-df8ec
    @Ayubkhan-df8ec 3 ปีที่แล้ว

    Price plz

  • @user-vp1xw4yi9y
    @user-vp1xw4yi9y 5 หลายเดือนก่อน +1

    Ap ka prosas rong ha

    • @CivilWork
      @CivilWork  5 หลายเดือนก่อน

      Dear Agar yh ghalat hai to ap sahi tariqa btain

  • @rajeshmoond483
    @rajeshmoond483 2 ปีที่แล้ว

    Cont no bhejna

  • @ajishkumary4297
    @ajishkumary4297 2 ปีที่แล้ว

    ബ്രിഡ്ജ് ക

  • @RailWayBandit
    @RailWayBandit 9 หลายเดือนก่อน

    Can you hire an English speaker person next time please?

  • @RajabhdpeDepartment
    @RajabhdpeDepartment 6 หลายเดือนก่อน

    HDPe welder Job vacancy in Abu Dhabi rajab trading co llc HDPE DEPARTMENT

  • @dskumar5088
    @dskumar5088 2 ปีที่แล้ว +1

    Good

  • @gcsindia528
    @gcsindia528 2 ปีที่แล้ว +1

    Good