I just got my corolla 2021 LE muffler changed after watching your video, the part i got was 2 inch instead of 2.5 inch bc i didn’t do it all the way, just the muffler. It sounds fcken amazing. Part costed about $100 from the muffler website and labor fee was around $130 so I got it done for $230 and it sounds badass 👀👀
@ericplz7420 I have a 2020 le and I'm thinking about doing a modified muffler too. Which magnaflow muffler model did you purchase for the 2-inch inlet? I went to Magnaflow website and saw 2.25 inlets with 4 x9 oval. Thanks for any tips.
@@bossadamsgarage so having had this exhaust for a month now is their a lot of drone noise and is it really loud inside? Wanting to do the same set-up on my 2021 SE Corolla. But not wanting that flowmaster drone inside.
@currencygetter no I didn’t get it, I just left everything stock. If you get it though lmk how it sounds, I’ve been thinking of getting a muffler delete
Dude you made your 2020 corolla the most perfect exhaust upgrade i saw in youtube. I hope you can give me what exactly stock number or part number .please i keep adding mods to mine and I’ve been waiting for this. Thanks
@@bossadamsgarage also, I checked the link for the muffler on Amazon and it's saying it doesn't fit the Corolla. Not sure if you guys meant to put a different link? 🤔
That's because the muffler you see in the video and the link is for a 2.5 inch exhaust, which is bigger than the stock exhaust. On this car we did a custom 2.5 in cat back exhaust with a 4in tip.
No tune. Just got the pipes and air intake. To optimize the add ons you can get it tuned but the gains you get from those 2 add ons really don't require a tune. The car will adjust itself most of the time. Especially if its a new vehicle.
Not sure of the part number for the muffler but it is a magnaflow, one in one out (the shop had it in stock) with 2.5inch pipe from the cats and a heat treated tip
I too have a 6MT, I just ordered an afe cold air intake, and started to look at mufflers. I just want to replace the end muffler, what is the stock pipe size and do u know the muffler measurements? Also it does sound pretty good.
Off the top of my head I believe the stock pipe is like a 1 3/4, but don't take my word on it. I don't know the muffler measurement but I posted a link to the muffler in the description of the video.
I wonder if you cut the cat off if you would gain better gas mileage and horsepower you can in my state the car sounds great but I wonder if we could get better performance if we took the cat out and trick the sensor what we would get if anybody has done this please respond and let me know what kind of difference did you get thanks in advance great video as well my friend!!
I actually got the magnaflow muffler. It sounds good. I didn’t delete the resonator yet but I’m still thinking about it. It sounds like yours but quieter .
Hey what's up I have a question is the bolt pattern the the same for the exhaust for the se and le like if I did a se rear bumper swap could I bolt on an e Aftermarket export the se on my le
If I had to guess, I would assume they would line up the same. I haven't compared the rear bumpers of the se and le before but I would assume they would be the same if not identical with small variations to a valence, possibly. From what I've seen online, they look the same.
All the piping was provided through the exhaust shop. We just told them what size pipe we wanted to use. We bought the muffler and tip separate. It saves you a little money that way.
If you do an exhaust get custom headers all the way back and get a good air intake as well. Could also add a throttle controller to get better response time to avoid lag from the pedal to computer response time. Every millisecond matters especially when having a cvt transmission. Upgrade the suspension to a lightweight adjustable set up. You could also upgrade your brake rotors and pads and then switch to lightweight carbon rims to reduce unsprung weight. You should definitely get the ecu tuned by a tune shop to increase the hp and tq once exhaust mods are made to truly see results.
Nope no engine light, it still has both CATS, just cut right at the resonator and did 2.5” piping all the way back to a magnaflow muffler with a custom tip
amzn.to/3wP6W8F This is as close as I've found for the exhaust tip that is like ours. The one we got was from the exhaust shop and it was actually the last one they had in stock.
No, we installed the intake after the exhaust. I love the way the AEM intake looks, however, I personally don't know anyone that has ran it so we basically went with what we know. I'm sure you'll get the same performance out of the AEM vs what we installed.
Still holding up strong. We had everything welded up nice and tight by a reputable shop. I am not sure how it will do regarding the snow and salt. Here in the south we typically don't deal with that much if at all. All I can say is, if or when you get it done, make sure you have a good shop with good ppl handling the job for you.
I know it’s late and all but do I have to buy the piping as well ONTOP of the muffler and exhaust tip so I can do a resonator delete and have piping like your friend from the cats ?
Yes. Buy him getting the shop to do it they provide all 3 (pipe, muffler and tip). It was necessary to go through them, at least I believe, bc of all the bends that were needed to make the 2.5 inch pipe fit as clean as it did.
@@bossadamsgarage There's a company in Columbus Ohio called Thorton Chip Tuning. Their computer chips plug into your OBD2 port. They claim that their Stage 3-chip gives all cars a 30 horse power gain and a 5mpg increase in milage. But you have to use the highest possible octane gasoline for when the chip is used for your Toyota Corolla. I have a chip in my little 2007 Hyundai Elantra. I have never dyno tested the chip on my car. Thorton Chip says that their chip does not void your factory warranty and no Check engine lights will ever come on. Here in central California we have 100˚ to 110˚ weather in the summer months. But in the winter I can defiantly feel the extra horse power from my car with the Thorton chip. I love your video and I will be replacing my 2007 Hyundia Elantra with a newer 2020 to 2023 Toyota Corolla. The very 1st modification that I do is always a Cat-back exhaust system. Your 2.5" exhaust is really deep, nice, and very impressive to me.. I can't wait to do the same at my local muffler shop. Thanks for the video...
Since you guys did a resonator delete, is there any noise inside the car on long drives..?? Is there any droning noise since you guys did that resonator delta..?? I totally loves this video and I will be doing the exact same custom exhaust to my new Toyota Corolla. @@bossadamsgarage
I have a 2021 and installed the magnaflow exhaust and left the resonator on and it’s to quiet, the installer didn’t want to take resonator off because he said the catalytic converter is part of the resonator and he didn’t want to void my warranty. I seen where yours was cut off do you still have a catalytic converter. Thanks
On my 21 SE, its the cat bolted welded to the headers. Then the two resonators pieces welded together bolted to the cat. then the muffler and pipe bolted to the resonator piece.
I believe so. Hard to say though since all the piping was custom. If your car has the same channels then I would think it’s a safe bet. Just make sure you take it to a good muffler shop
There's a link in the description to the actual muffler if you wanna save a little cash since a shop will charge you a premium for it, but we went to a local shop near us that is known to do good work. That's the big thing with exhaust, you get what you pay for. Don't cheap out and go with a less reputable shop just because of price.
They can but you want to do it properly so that it does not throw an O2 code in the car. If you don't mind seeing a check engine light all the time and knowing that its your O2 sensor then you can go the cheaper route.
Definitely worth it, I haven't done my own exhaust but I have put some money into the suspension, it's very nice around corners now. The next thing I'm doing will help with power, the 2019 le and 2016 are the same so go ahead and ask any questions
Split off the muffler and kill the look and look stupid , split before the muffler and kill your sound, unless you bought a second muffler and you making it fit somewhere, which unless its done symmetrical, will look equally stupid
When we did it, it costed $400. No telling what the price would be now. The cheapest way to go about it is to buy all the parts yourself and then get someone to weld it all together for you.
We were told if we need the modification after the cat we would not void the warranty. I would double check with your local shop though before committing.
He chose not to straight pipe bc it wasn’t going to give him that exact ricer tone he was going for. Plus, all the guys at the shop suggested that specific magnaflow muffler for his car.
I don't see why you couldn't. All the exhaust work on this car was done by a professional shop. We just saved some cost by purchasing the muffler and tip ahead of time.
No hatches run the muffler side to side sedans run from front to back on passenger side.... that being said, a girl I met in local car club did muffler and cat delete on her hatch, and ran 3" pipe with symmetrical dual split starting at the heat shield. She also had quad tips. It looked siick aside from tips and sounded diirty as hell
Well they are very similar haha, it sounds better in person the video doesn’t do it much justice plus I was new at driving a 6 speed at the time so my takeoff sounded horrible
Finally I found music to my ears.
Best corolla sound.
Sounds like Brian’s Eclipse from the first F&F for real loving that sound
lol
No it doesn’t. Sounds like a beefed up e210 🤘🤘🫡
Sounds so good, not raspy at all. Nice deep low growl
Badass front plate cover brother. lol 🥷🙏🏻💪🏼💪🏼🫡
Love the sound, just ordered injen air intake...would love this exhaust setup...need that muffler though...part numbers or links please.
I just got my corolla 2021 LE muffler changed after watching your video, the part i got was 2 inch instead of 2.5 inch bc i didn’t do it all the way, just the muffler. It sounds fcken amazing. Part costed about $100 from the muffler website and labor fee was around $130 so I got it done for $230 and it sounds badass 👀👀
That’s awesome man! Glad we could help you out!
Do you have a link of the parts you ordered? Thanks in advance
@@eddiesan915 its in the description
@ericplz7420 I have a 2020 le and I'm thinking about doing a modified muffler too. Which magnaflow muffler model did you purchase for the 2-inch inlet? I went to Magnaflow website and saw 2.25 inlets with 4 x9 oval. Thanks for any tips.
Congrats on your new Rolla!
getting my magnaflow installed this weekend on my Rolla. Cannot wait
You’ll absolutely love it!
@@bossadamsgarage here's an update.. had my magnaflow for a few days now. You were definitely right about living it. I DO LOVE IT!!
@@bossadamsgarage so having had this exhaust for a month now is their a lot of drone noise and is it really loud inside? Wanting to do the same set-up on my 2021 SE Corolla. But not wanting that flowmaster drone inside.
There’s not a lot of cabin noise at all, it’s a deep growl but nothing stupid loud
How much did it cost you?
Next upgrade to my Corolla! Sounds perfect. Toyota should've done this to the Apex!
I have an apex, I’m thinking of just getting a resonator delete
@@dominiccervantes469hey did you ever get the resonator delete on your Apex? I have a 22’ Apex and it’s completely stock right now
@currencygetter no I didn’t get it, I just left everything stock. If you get it though lmk how it sounds, I’ve been thinking of getting a muffler delete
Dude you made your 2020 corolla the most perfect exhaust upgrade i saw in youtube. I hope you can give me what exactly stock number or part number .please i keep adding mods to mine and I’ve been waiting for this. Thanks
The muffler is linked in the description of the video, the pipe however is just 2.5inch pipe from the cats back with a 2.5-3inch heat treated tip.
@@bossadamsgarage can the cats be removed without any risk of damaging the engine?
Should have left on the resonator for the raspyness
*_Not rice, just boost performance a bit and sounds nice_*
Rice Rice Baby ..............
Awesome video man!
It sound awesome!!
Resonator would cut down a little of the raspiness. Maybe get a 2.5 inlet/outlet cherry bomb should be good too
I have a 2015 lifted Scion xB. With a 23” length and 2.5” inlet cherry bomb glasspack with a TRD sport muffler. And it sounds beautiful 🔥
I have the magnaflow as well and it sounds nice!!
Sounds great
Sounds like a 4AGE I’m jealous
Now it can cook rice 🍚
What exhaust tip is this? I like it.
amzn.to/3Kqf5sr - 2.5" in/ 4" out
@@bossadamsgarage thanks
Not too familiar with modifying cars, does having a wider piping causes a deeper sound and what does it add to the car? The car sounds pretty sick.
Yes, it’ll deepen the sound with a wider pipe.
@@bossadamsgarage Thank you! The wife and I are waiting for our 2021 Toyota Corolla SE MT and planning out the mods to do.
Love the sound! Would this still work on an automatic? Thanks for your input!
Yep, the same exact set up will work on an automatic.
@@bossadamsgarage dope! Are there any specific alterations you have to do to the exhaust or is it just as simple as slapping it on? Thanks again
@@bossadamsgarage also, I checked the link for the muffler on Amazon and it's saying it doesn't fit the Corolla. Not sure if you guys meant to put a different link? 🤔
That's because the muffler you see in the video and the link is for a 2.5 inch exhaust, which is bigger than the stock exhaust. On this car we did a custom 2.5 in cat back exhaust with a 4in tip.
corollas kinda quick
Sounds great outside. Any major droning inside?
Nope, sounds very clean in the car.
Did he tune it first or started with the pipes just got a Corolla don’t knw where to start
No tune. Just got the pipes and air intake. To optimize the add ons you can get it tuned but the gains you get from those 2 add ons really don't require a tune. The car will adjust itself most of the time. Especially if its a new vehicle.
Hey can you guys tell me the exact parts you guys bought??? I too have a 2020 corolla and I want to add these mods to the car
Not sure of the part number for the muffler but it is a magnaflow, one in one out (the shop had it in stock) with 2.5inch pipe from the cats and a heat treated tip
I too have a 6MT, I just ordered an afe cold air intake, and started to look at mufflers. I just want to replace the end muffler, what is the stock pipe size and do u know the muffler measurements? Also it does sound pretty good.
Off the top of my head I believe the stock pipe is like a 1 3/4, but don't take my word on it. I don't know the muffler measurement but I posted a link to the muffler in the description of the video.
Is the sedan and hatchback version same midpipe?
I wonder if you cut the cat off if you would gain better gas mileage and horsepower you can in my state the car sounds great but I wonder if we could get better performance if we took the cat out and trick the sensor what we would get if anybody has done this please respond and let me know what kind of difference did you get thanks in advance great video as well my friend!!
I’m almost tempted to do the same to my Corolla SE lol
You should!
@@bossadamsgarage I just gave into that urge . I'm gonna end up getting exhausts along with the front lip spoiler. Haha! I can't help myself
I actually got the magnaflow muffler. It sounds good. I didn’t delete the resonator yet but I’m still thinking about it. It sounds like yours but quieter .
Haha ya, you'll have the more neighborhood friendly exhaust!
I have a question did he weld the piping to the cat I was looking to see and couldn't really tell
No. He cut the pipe roughly about 4-5 inches after the cat and that's where he started the new pipe.
Hey what's up I have a question is the bolt pattern the the same for the exhaust for the se and le like if I did a se rear bumper swap could I bolt on an e
Aftermarket export the se on my le
If I had to guess, I would assume they would line up the same. I haven't compared the rear bumpers of the se and le before but I would assume they would be the same if not identical with small variations to a valence, possibly. From what I've seen online, they look the same.
Where did you order your pipes
All the piping was provided through the exhaust shop. We just told them what size pipe we wanted to use. We bought the muffler and tip separate. It saves you a little money that way.
Hello guys. I just got a new 2021 Corolla XSE, if I do this mod to mine it will void the warranty of the car? Love the sound btw
I would ask your local dealer. I believe if you do a cat back exhaust it does not void the warranty, but don’t take my word on it
Ok I going to ask. Thanks for your answer
Hey i have a 2020 corolla le. It's super stock and i want to dump some money into it!! Any advice on where i should start???
Definitely the exhaust! Once you do that you’ll be inching for more mods!
If you do an exhaust get custom headers all the way back and get a good air intake as well. Could also add a throttle controller to get better response time to avoid lag from the pedal to computer response time. Every millisecond matters especially when having a cvt transmission. Upgrade the suspension to a lightweight adjustable set up. You could also upgrade your brake rotors and pads and then switch to lightweight carbon rims to reduce unsprung weight. You should definitely get the ecu tuned by a tune shop to increase the hp and tq once exhaust mods are made to truly see results.
Greetings, I really like how it sounds and I have a 2020 carolla I would like to do the same. I ask you the engine light now you turn on?
Nope no engine light, it still has both CATS, just cut right at the resonator and did 2.5” piping all the way back to a magnaflow muffler with a custom tip
Hi do you have the link for the heat treated tip?
amzn.to/3wP6W8F
This is as close as I've found for the exhaust tip that is like ours. The one we got was from the exhaust shop and it was actually the last one they had in stock.
Where did you get that exhaust tip and muffler?
Magnaflow Muffler:
amzn.to/37Z0C1W
Heat Treated Exhaust Tip:
amzn.to/3wP6W8F
@@bossadamsgarage thank you I want my Corolla to sound similar to that
Did you have the intake installed before this? And what is your input on the AEM intake for the 2021 Corolla SE
No, we installed the intake after the exhaust. I love the way the AEM intake looks, however, I personally don't know anyone that has ran it so we basically went with what we know. I'm sure you'll get the same performance out of the AEM vs what we installed.
@@bossadamsgarage what intake did you install , do you have a video for that ??
Is this exhaust still holding up any problems I live in New York lot of snow and salt.
Still holding up strong. We had everything welded up nice and tight by a reputable shop. I am not sure how it will do regarding the snow and salt. Here in the south we typically don't deal with that much if at all. All I can say is, if or when you get it done, make sure you have a good shop with good ppl handling the job for you.
@@bossadamsgarage thanks appreciate for getting back to me.
what is that part before the resonator? my local shop removed it and said it was another resonator making sure it is not the catalytic converter
Which part are you referring to? We got the pipe cut right after the catalytic converter so that the warranty on the vehicle would remain.
at about 2:30 in the video that round piping right before the jack stand
To our understanding that is the cat for that vehicle, hence that's why the shop cut it right after it in order to keep the warranty for the vehicle.
Did you replace the resonator with the magnaflow muffler? Also did muffler delete?
No. We deleted the resonator and replaced the stock muffler with a Magnaflow.
I know it’s late and all but do I have to buy the piping as well ONTOP of the muffler and exhaust tip so I can do a resonator delete and have piping like your friend from the cats ?
Yes. Buy him getting the shop to do it they provide all 3 (pipe, muffler and tip). It was necessary to go through them, at least I believe, bc of all the bends that were needed to make the 2.5 inch pipe fit as clean as it did.
I have the le corolla they don't make exhaust for it yet what could I use for an exhaust
I'm sure the exhaust that was installed on Wade's would work on your model as well. The one installed on this Corolla is custom from the cats back.
You’re from Panama City ??
No lol
Could you guys feel more power with the bigger exhaust and muffler changes?
Honestly, no. It's more for aesthetics than anything. On a dyno, it might have picked up 5-10 hp.
Nope, just the ones you see in the 2020 Corolla playlist.
@@bossadamsgarage There's a company in Columbus Ohio called Thorton Chip Tuning. Their computer chips plug into your OBD2 port. They claim that their Stage 3-chip gives all cars a 30 horse power gain and a 5mpg increase in milage. But you have to use the highest possible octane gasoline for when the chip is used for your Toyota Corolla. I have a chip in my little 2007 Hyundai Elantra. I have never dyno tested the chip on my car. Thorton Chip says that their chip does not void your factory warranty and no Check engine lights will ever come on. Here in central California we have 100˚ to 110˚ weather in the summer months. But in the winter I can defiantly feel the extra horse power from my car with the Thorton chip. I love your video and I will be replacing my 2007 Hyundia Elantra with a newer 2020 to 2023 Toyota Corolla. The very 1st modification that I do is always a Cat-back exhaust system. Your 2.5" exhaust is really deep, nice, and very impressive to me.. I can't wait to do the same at my local muffler shop. Thanks for the video...
Since you guys did a resonator delete, is there any noise inside the car on long drives..?? Is there any droning noise since you guys did that resonator delta..?? I totally loves this video and I will be doing the exact same custom exhaust to my new Toyota Corolla. @@bossadamsgarage
@@coachgomes To me it did not have a lot of drone. It has an excellent sound though for a corolla. You're going to love it.
I have a 2021 and installed the magnaflow exhaust and left the resonator on and it’s to quiet, the installer didn’t want to take resonator off because he said the catalytic converter is part of the resonator and he didn’t want to void my warranty. I seen where yours was cut off do you still have a catalytic converter. Thanks
Cat is still on there, but the resonator is removed!
On my 21 SE, its the cat bolted welded to the headers. Then the two resonators pieces welded together bolted to the cat. then the muffler and pipe bolted to the resonator piece.
Will this work for a 2019 Toyota Corolla hatchback
I believe so. Hard to say though since all the piping was custom. If your car has the same channels then I would think it’s a safe bet. Just make sure you take it to a good muffler shop
Where did you get the heat tip?
The shop had some instock
Dude where u get the exhaust system from?
There's a link in the description to the actual muffler if you wanna save a little cash since a shop will charge you a premium for it, but we went to a local shop near us that is known to do good work. That's the big thing with exhaust, you get what you pay for. Don't cheap out and go with a less reputable shop just because of price.
@@bossadamsgarage Thank you sir! What kind of pipes and muffler tips did ya use?
The pipes are 2.5 from the cat back. Here is the link for the muffler - amzn.to/37Z0C1W
@@bossadamsgarage thanks you sir
can the cats be removed without any risk of damaging the engine?
They can but you want to do it properly so that it does not throw an O2 code in the car. If you don't mind seeing a check engine light all the time and knowing that its your O2 sensor then you can go the cheaper route.
Does anyone know if it will sound good if i delete the resonator on my corolla I currently only have the borla exaust system on 2022 sedan
It's going to be louder than this and it will drone in the cab.
Is drone in cab a bad thing ?
Overall would u recommend that for more sound or will it be a better sound ?
Update : no drone and sounds similar 🤪
How much did it cost to make the exhaust louder
All in total with the custom piping, muffler and tip, it costed a little over $400
Little bit of fart cannon but sounds good 🤣
Will this not make your check engine light come ???
No, we had no issues installing the exhaust the way we did.
@@bossadamsgarage give it time
@@bossadamsgarage is it on yet ?
@@thetimetraveler1427 The light never came on. The way we installed the exhaust it will not throw a code.
Is this worth doing with a 2016 Corolla? The 2020 looks so much better
Hey man, I say if it's your car and you want to fix it up do it! It'll definitely make you enjoy the car more.
Definitely worth it, I haven't done my own exhaust but I have put some money into the suspension, it's very nice around corners now. The next thing I'm doing will help with power, the 2019 le and 2016 are the same so go ahead and ask any questions
Hey guys...can you check receipts or ask shop for part number for muffler...cant find a magnaflow with burnt tip anywhere.
The tip was custom they welded to the muffler but I didn’t get the box the muffler came in or anything but I may can call the shop and ask them
Can you make that dual exhaust using that 1 muffler?
I would assume you could, you’d just have to put in a Y pipe right at the rear axle.
Split off the muffler and kill the look and look stupid , split before the muffler and kill your sound, unless you bought a second muffler and you making it fit somewhere, which unless its done symmetrical, will look equally stupid
Is Deleted muffler going to affect your warranty?
Not that we were told. Deleted Cat would from what we were told.
Nice ❤❤❤
how much would this run me back total?
When we did it, it costed $400. No telling what the price would be now. The cheapest way to go about it is to buy all the parts yourself and then get someone to weld it all together for you.
Will this fit the 2020 corolla LE
I would assume so, there was only minor custom pipe bending needed to get it to fit properly.
How much did it cost for everything?
If I remember correctly, it was a little over $400. Not horrible for a custom piped system.
How much this cost?
When we did it 4 years ago, it was about $450 all said and done. I'm not sure what a shop will charge to do the custom piping and installation now.
how much all of that cost u?
The finished product ended up being around $450. Not to bad at all for a custom job.
Can this void a factory warranty?
We were told if we need the modification after the cat we would not void the warranty. I would double check with your local shop though before committing.
Thank you. I'd like to do this to mine. I got the new 2022 it sound pretty nice but I'd like it a bit louder.
I definitely would recommend the 2.5 pipes then. That's what we had installed on this car and it gave it a fantastic sound.
Is it increasing the horse power or minus the horse power? I wanna installed mine too..
It feels like it has more power!
Will have to dyno test it
Is that the 1.8 or 2.0?
That is the 2.0, but I believe the same application would work for the 1.8. I don’t believe they’re really that different underneath.
Why not straight pipe ? Any difference?
He chose not to straight pipe bc it wasn’t going to give him that exact ricer tone he was going for. Plus, all the guys at the shop suggested that specific magnaflow muffler for his car.
@@bossadamsgarage which one was it as I go in the morning for exactly this
Magnaflow muffler: amzn.to/37Z0C1W
@@bossadamsgarage AWESOME
Does this fit on 2020 corrola LE??
Yes sir!
Where I can buy it ?
The car or the set up? lol
After owning a New Edge GT with magnaflows for a few years, everything under 8 cylinders sounds terrible to me and I hate it :(
Boo! You gotta love all the rides!
you mean edge ST? if so, its a v6 bud.
@@machucast new edge is the newer version of the SN95
Does it drone?
Not really, you can hear it in the car but it’s exactly what was wanted. Not too loud not too quiet.
Mine does LOL. Car vibrates too much. I changed my resonator and installed a manga flow exhaust
Lol. What resonator did you install?
@@bossadamsgarage vibrant ultra quiet resonator
Anyone buy it from amazon link?
Can i do this on my 2021 corolla LE
?
I don't see why you couldn't. All the exhaust work on this car was done by a professional shop. We just saved some cost by purchasing the muffler and tip ahead of time.
Can I do this on a lease Corolla ?
Would not recommend.... lol
@@bossadamsgarage what about just deleting mufflers ?
Would not recommend changing anything on a leased vehicle unless you want to own it.
It’s that car automatic ?
Manual
@@bossadamsgarage if it was auto would it sound the same:????
Yes. It'll sound just like it does in the video. That is if you do to it what we did, being the 2.5 inch piping from the cats back.
Since you went with 2.5 pipe, what size is it stock?
I believe 1 3/4
Sounds like fkn RICE, but I must admit that idle sound is cool.
How much was this
It was roughly $450. I'm not sure how much it would be now with the cost of everything going up.
@@bossadamsgarage yea I got my Corolla for 21 k they add stuff to it now it’s 29 k I use to get these cars for 16 k back in the days
what is the part number for the magnaflow muffler?
I honestly cannot remember. We ordered it through the shop and this one happen to have the 2.5 inlet we were looking for.
How much was it ?
With the custom piping, muffler, tip and labor, it came out around $400. Not bad for a fully custom set up.
Do you think this exhaust will work on the hatchback too?
I don’t think so, they are routed differently
No hatches run the muffler side to side sedans run from front to back on passenger side.... that being said, a girl I met in local car club did muffler and cat delete on her hatch, and ran 3" pipe with symmetrical dual split starting at the heat shield. She also had quad tips. It looked siick aside from tips and sounded diirty as hell
where did u buy the piping
I got it from a local muffler shop that made the exhaust
nice
Yo I want this 😅 how much did this cost ?
They quoted us $450 but we only ended up paying $420.
@@bossadamsgarage 420 Nice... sorry 25 but mentally 14
Resonator delete and Magnaflow muffler cost me $205 with tip so i think he got scam or sum
Leave resonator just take off muffler and run 3" straight to the back tip. Dont need all that xtra bs and sounds better no droning sounds
That’s a BAD BITCH
Not bad tbh
I would say put a resonator on that to clean it up bit.. tad ricey
I copied this video exactly for my same car lol
Haha that’s awesome man! I hope it turned out like you wanted!!
I bet the torque lowered.
Why's that?
@@SimbaUchihaa from my point of view, the only time you should increase the size of exhaust piping is if you’re adding forced induction.
@@gmontenegro9711 that's true, which is why my next car gotta already have forced induction in it 💯. I'm not doing NA to forced induction build
Trumpet noises 🤣🤣🤣
this makes me sad ... i have a 2020 corolla too .. but its a hybrid T_T
Oh no! Still a nice car though!
@@Torque_Spec_Garage yeah, it is a good car .. I do like that i gas up once every 2 week.. ... I just miss the mean sounds.. like in the video
rip ears on the motorway
Maybe gained 2 hp from all that lol . And it's just a magnaflow muffler maybe 100 bucks ... not a real expensive exhaust set up
Didn’t know every mod you do had to be crazy expensive
its resonator not resignator lol
It sounds exactly like a Honda
Well they are very similar haha, it sounds better in person the video doesn’t do it much justice plus I was new at driving a 6 speed at the time so my takeoff sounded horrible
Rice
Tip is coming out to much