I got it from the same people who sell the cloth. They are called solsound. I just had a look and they still stock the logos at £25.00 each. That seems a lot more than I paid. Do a Google search. They seem easily available.. Good luck.
I'm about to replace my grill in between weekly gigs. I was going to use the existing logo. Is it possible to remove the old grill clothe and keep the logo in one piece?
Yes. The logo has pins on the back that locate into holes. You can see them in one of my photos on the vid. You should be able the carefully prize it off. The only tricky bit is finding the holes once you have replaced the grill cloth. Good Luck.
How tight should you pull the cloth when you are stapling it to the board? any tips in order to prevent floppy areas? how much grill cloth did you buy to do this cab? 36x32?
+Peter Denny I got the grille cloth from solsound eBay shop. Solsound sell a lot of Marshall type stuff if you need to restore anything. They sell it by the meter. You are right in that the 'AX' refers to the top, split angle 4 x12 and the 'BX" the bottom cab in the classic Marshall stack. The AXs are quite common but the BXs seem quite rare.
Very helpful video. And yeah, finding guitar parts in the cab is very rock and roll - old school.
Thanks for putting up the video was just what I needed!
Using a power drill with a phillips #2 bit will make screw removal much quicker and save your wrist verses a screw driver.
Clear and concise instructions - thanks!
Muchas Gracias por la explicación. Muy práctico.
Thanks so much for the explanation. Very practical.
Dónde compraste el grill cloth ?
Thanks !
I’m about to do the same thing. Can you tell where you bought the Marshall logo? Thanks
I got it from the same people who sell the cloth. They are called solsound.
I just had a look and they still stock the logos at £25.00 each. That seems a lot more than I paid. Do a Google search. They seem easily available..
Good luck.
@@John_Bauers thanks for the reply!
I'm about to replace my grill in between weekly gigs. I was going to use the existing logo. Is it possible to remove the old grill clothe and keep the logo in one piece?
Yes. The logo has pins on the back that locate into holes. You can see them in one of my photos on the vid. You should be able the carefully prize it off. The only tricky bit is finding the holes once you have replaced the grill cloth. Good Luck.
How tight should you pull the cloth when you are stapling it to the board? any tips in order to prevent floppy areas? how much grill cloth did you buy to do this cab? 36x32?
This was really informative, thanks!
Very informative, thanks for the video!
Where did you source the new grill cover material?
Oh by the way that is a 1960AX. The BX is a straight cab without any slant.
+Peter Denny I got the grille cloth from solsound eBay shop. Solsound sell a lot of Marshall type stuff if you need to restore anything. They sell it by the meter.
You are right in that the 'AX' refers to the top, split angle 4 x12 and the 'BX" the bottom cab in the classic Marshall stack. The AXs are quite common but the BXs seem quite rare.
I found the best price here: www.mojotone.com/Cabinets_x/Grillcloth_x/Large-Check-Grill-Cloth_2
Thanks!