How to Configure Ethernet to Serial Converter NPORT Operation Mode as Pair Connection Master & Slave

#EthernettoSerialConverter,
#MOXANPORT,
#OperationModePairConnectionMaster&Slave,
#MOXA,
#IndustrialSolutionsNetworking,
#RS232,
#RS485,
#RS422,
#SerialPairConnectionMaster&Slave,
#PairConnectionMaster&Slave,

[@hero96559]

Good, I have a scenario in my work. I have 2 MOXAs NPORT 5100 connected to each other as the video above bu there is a third moxa CN2610 connected to the master MOXA instead of PC1. The connection between the NPORT 5100 and CN2610 is through the serial ports but the connection isn't not working .. I need the wirte serial port configuration in oder to bring the connection up and running between NPORT 5100 and CN2610

[@juliansyah230]

Hi Shabir, can you help me to define what is the proper moxa model that i can use to monitor 4 Modbus RTU 485 in the ring. my plan is 4 modbus RTU devices will connected in daisy chain, than only the 1st and 4th device will connected to Moxa modbus RTU converter to convert the data to the managed switch

[@aitzazkhanAK]

Good, can we use hyperterminal for accessing the pc on master ?

[@daifallahhoussemeddine5162]

Good morning .
Please i have a tow moxa 5250 can I use them withe the same configuration to convert analogue data to tcp/ip .

[@ShabirsTechTalks]

yes please confirm the data type, you can convert in vice versa direction, and also confirm the protocol type so i will suggest you operation mode accordingly.
follow below play list for further video's related to NPORT.
th-cam.com/video/goOAQn826mU/w-d-xo.html

[@daifallahhoussemeddine5162]

@@ShabirsTechTalks thanks for your help i followed the steps of pair connection and it work , now i have a nother question .
In my case I'll use a wireless connection between the two nport in place of rj45. My question is should I use a getaway?
Thank you very much for your help.

[@ShabirsTechTalks]

@@daifallahhoussemeddine5162 www.moxa.com/getmedia/be223bc6-fdaa-4b2d-8084-7d30fb5126e0/moxa-nport-w2150a-w2250a-series-datasheet-v1.7.pdf

[@ukuy9620]

Good morning sir, i have one question sir, how to make merger virtual port in moxa sir?? Or make split 1 data serial to two moxa for two output serial device

[@cuentaempresatg5421]

Para ver la configuración en Español: th-cam.com/video/2AJHBykwu-E/w-d-xo.html