GooSky RS4 GTS Plus Flight Controller Complete Setup Video Guide
ฝัง
- เผยแพร่เมื่อ 19 ม.ค. 2023
- Welcome to Last video of the GooSky RS4 3D RC helicopter Build Video Series. In this video you will watch complete setup of GooSky GTS+ FBL Flight controller, its connections, its setup, and Helicopter final setup.
S1 Helicopter: bit.ly/gooskys1heli
S2 Helicopter: bit.ly/gs2heli
RS4 Venom Helicopter: bit.ly/rs4venomae
#goosky #rs4 #helicopter #rc - แนวปฏิบัติและการใช้ชีวิต
This is one of your strong areas Ali. You are very good with all this stuff. I am strong with the mechanical component, but sometimes the radio stuff can be challenging.
Thank you buddy. doing my best to help everyone enjoy the hobby :)
Great video! You answered so many questions I had.
you are welcome ;) Join my supporters group if you like :) www.buymeacoffee.com/alishanmao
Looks good Ali, Awaiting the flight video.
There is one already on my channel. 3rd Flight coming tonight.
th-cam.com/video/KJKWtLWpjN4/w-d-xo.html
Thanks Ali. I always learn something new from you....
My pleasure!
Great video ali. But it’s better to have 2 degrees on the tail just for stability
Thanks for the tip. But most of my heli setup went this way. these new Flight controllers do the rest for us. and that is why they ask for center pitches to be 0 and rest end points (Min max travel)
You got it going on brother,after purchased heli you the man 👍☕️☕️✌️
welcome :) get some coffees coming if you like: www.buymeacoffee.com/alishanmao
Waalaikumsalam sir..thanks for sharing
Most welcome
Really interesting to see the heli setup process again after a few years away. Will the FC work with an ExpressLRS PWM receiver?
It should work with sbus only
Parece ser um ótimo Heli pra quem sabe fazer apenas Hover como eu !
it can do much more than that
@@alishanmao Obrigado pela resposta, gostaria de saber se tem essa versão completa, ja tenho o Futaba14SG.
The video i was waiting for! Need also the bluetooth app video... fisically setting by buttons is hardcore like 3D :P Also do not forget on how to setting the autolevel, the only setting i leave on on any rc heli! I am not into 3D stuff, just scale flight is enough for me! Thanks! I din't see on video on how to activate the autolevel...just clicking one stick, but what config. Also another question, does it autolevel or just have attitude mode? I mean bank limit to 45º, but no autolevel? I don't quiet understand if it have autolevel or just attitude (45º bank) limit...let me know!
Channel 5 set to 3 position switch will change from Normal mode (Auto level, banking limited, like a 6G mode for beginners) to idle up 1 and 2 (for 3D, you can set two different pitch curves and throttle curves for your choice). so just follow what shown in this video. For Bluetooth app is best to use after you have done the first setup manually. there is no messing it up this way. bluetooth can easily mess up the settings via android app if person does not know what to do. have fun
es un desafio poner todo en su lugar sobre todo cuando tienes puros helis walkera jajaj oye tienes mi bocina portatil jajaj suena muy bien, saludos
its fun to build :)
I think the yellow wire from the esc should go to the signal in the rpm port of the flight controller. Nice video.
yes I thought too but Goosky said just leave it alone
@@alishanmao I have plugged mine in is there a reason I shouldn’t?
Good
Thanks
5:52 wow impressive, so that means it can bind to the xk x6 transmitter, or eachine e6 transmitter is that even possible?
it will bind to SFHSS protocols yes :)
Hi Ali great video tutorial as usual. I just bought and built a OMP M4 and was curious if the GTS+ controller will work with it ? if not, what controller would you suggest would be best suited for the M4 ?
Yes it will. congrats
Hi Ali , please may I ask if i use a spectrum satellite and connect to the DSMX will it work . My transmitter is NX8 Spectrum.
it should. as long as they are sbus (protocol from Spektrum)
Just curious what values you are using for throttle in your Futaba transmitter for idle up 1 & 2? Do you have head speeds? Thanks!!
65% and 75%
Thanks for the video, do you know if we can use the RS4 GTS Flight control on other heli 450 class? Asking about it since it had a new firmware update. Any respond will be appreciated. Thanks
you should be able to
@@alishanmao Thanks!
wow...its been more than 15 years ago since my last heli build (haven't flown it for almost 10 years).....btw....that heli looks sweet.....
Welcome back! and lets fly more :)
hi. i am your fc.u r great by the way.
some question.😢
can i put this controller box to others such as sub420 or other brands. and i just connect as you shown.
🎉
Hey buddy, I have not used this on other helis. but in general it should work.
Hi bro, great vid as always… will this FBL unit fit any Fbl heli? Thank you
I believe it will fit other FBL units. not DFC heads though.
@@alishanmao thanks for the response. Why not DFC? It’s still flybarless
@@Fredhobby not the same buddy, minus the washout arms that provide extra stability for 3D Flights. However I have seen and smackdown DFC heads even properly so its all upto the algorithms and programming of the flight controller. GooSky Confirmed that you can't use GTS flight controller with DFC Heads
@@alishanmao ok, I thank you for your advice
Hi will this Goosky FC work on the OMP
M4@@alishanmao
for bec socket is from esc. but can i put in the reciever ch3 instead?
ch3 only for throttle
👍😉
thanks bud
@@alishanmao Most welcome bro .....👍😀
Do you perhaps know if the FC with the latest firmware will work with digital 1520us tail servos?
I bought the FC to use on my Logo 400 but I've discovered the FC only seems to support narrowband 760us servos, and I'm hoping to find a workaround.
If that's the case does the TX16S support the narrowband range?
Thanks in advance
I am not sure, i have to check with goosky buddy
@@alishanmao Thank you
Hi Ali. Did you make any changes to the ESC or left it default ?
totally default :)
hey i had a question about idle up, when i go to switch into idle 1 or 2 i don’t hear the rpm of the motors pick up faster but yet i have negative collective, is there anything i can do to fix this? i have a futaba t6k and thank you for your time, it’s a little frustrating cause im a beginner and have no idea what i’m doing, i do have the rs4 venom coming in from pre order but ima build it and i’m just confused as to why my idle up doesn’t engage for my s1 and s2 as well when i switch into idle up
Thanks for comment, but its difficult to say anything without watching your complete setup. maybe you have made mistakes in setup. you should do a detailed video of your problem and post it here: facebook.com/groups/gpshelicopters
you can get more ideas there too and i maybe able to help. its definitely settings issue
@@alishanmao sounds good thank you ali, i’d love to learn more about these curves and parameters but the radio set up has been a hurdle for me and i don’t wanna get discouraged from not learning properly or wasting money and crashing an expensive heli
Hi Mr. Ali,
Can I use this for any 160 size helicopter???
If not, could u kindly tell me any Flybarless unit that I can use to make a custom heli.
I got some old Blade 130 X fallen ( electronics no good) , wanna enable them flying again actually.
Thanks
try VBar or best use H1 GPS flight controller
@@alishanmao
Thank u sir.
Hello is there any user manual for the goosky gyro system? Many thanks in advance for your reply.
yes a PDF file. but this video can help quicker
@@alishanmao where can we get the pdf file?
you going to do a setup for Radiomaster TX16s?
For 3D Helicopters? or GPS helis? for gps helis i already did
for RS4 on TX16s, also if you have one for adding a Spirit 2 with GPS to RS4 would be good.
I watched your vid on the s2 and I'm confused you set pitch and throttle curves in your radio.
From what I understand every thing is already set in the flight controller all you need do do in the radio is assign switches to channel 5-6-7 Why do you set curves in the radio and assign values to switches?
Throttle curves need to be set to control head rotor RPM, Pitch Curves just need to set normal pitch curve. rest is left default for linear.
Does the cable at 9:40 come with the SFHSS receiver?
no
hi again . on the flight controller ,there is one socket say RPM. what is rpm. use for? how to conect this socket? please
thx in advance.
never used it and if i remember right, goosky says to leave it alone
11:00 if the forward servo which is the elevator servo, what if it was in the back would this Goosky GTS gyro, would it still work?
I wonder if the Goosky gyro can work with other helicopters other than Goosky heli
it should i believe
@@alishanmao Ok I will go dig into the settings again. There is one option that say forward servo, but this servo is in the back, of the ALZRC R42
Did you notice the "dead band" on cyclic?
none so far. mine is pretty responsive on cyclic. just the way i want :)
Is it possible to mount the GTS in the opposite direction where the wires exit from the tail end, and if so would you possibly know how the gyro can be changed on the FC?
I believe there is no such option for now
were you able to figure this out? i’m i’building an rs4 and tried a maiden today for both directions and still get the over correction
i was even told by CS that you can mount in the opposite direction tail end with wires out
@@_lark Unfortunately I didn't, but have moved over to using Rotorflight.
@@blooskyy7 i figured it out today and followed the manual instead of everyone’s videos and cs, i faced it back with the wires in towards the nose end of the fuselage and re-wired everything and seems that i had incorrect wiring into the FC. because there’s still no option to reverse the gyro at all, it was definitely my shotty wiring placement nothing else, i didn’t have to reverse anything neither or change to a different protocol, frustration has been tempting me to switch from futaba to something simpler
Jamper T18 Hello, I'm completely confused🤔
Please help me tune the radio😉
Just follow this setup
Dear Ali, when will you make a video on the GOOSKY RS7 helicopter?
unfortunately i have asked GooSky Many times but they do not reply nor wanna send RS7 to me. when they were just starting and no one was paying attention, they came to me for help. i helped them promote their brand, promote their helicopters and now that they are selling well and business is good, they just ignore my requests and completely forgot who helped them when they were in need. Sad to say but i do not think i will get a sample. Unfortunately i do not have money to buy one sample. if my followers and fans can donate and raise some funds, i can buy one RS7 and review it very honestly and straight forward. my followers can join and support my work here: www.buymeacoffee.com/alishanmao
Hello, please tell me, can I connect to this helicopter TBS Crossfire?
yes. use sbus rx
@@alishanmao Thank you👍
Alisanhanmou im a little bit confusion help me please when the best time put on servos arm horn is that power the heli power the radio and than put throttle stik on the middle on idle up mod how this work thank u
Normally we used to do that before. that we put arms only after we power on first time and center the servos. its best practice and safe. but nowadays these digital servos have no limits, like you can keep on turning their arms in circle (360) so you can just leave the servo horns on, and let the flight controller set the center point. after that you can adjust the arms angles and swash leveling.
@@alishanmao thank u sir
When I tilt my heli to the left, the GTS gyro also tilts to the left, and when it tilt the heli to the right the gyro tilts to the right. How do I fix the correction orientation? I have the gyro mounted right side up with the wires facing to the front as shown in the manual. I am using a Spektrum DX9 transmitter. Please advise.
you can use bluetooth and APP and fix the direction of gyro, do not fly in this state, it will crash on ground
How to setup 70a esc in rs4 ?
Yes. Please share us how to calibrate goosky 70a esc to futaba radio. Thanks
Hi
Does this gyro have rescue function?
no
@@alishanmao thank you bro
I need help I cannot fly my Goosky Rs4 anymore because the gyro servi need reverse but I do not know how please help.
reverse servo from radio
Hello, where should I connect the yellow wire from the ESC? My engine won't start.
The engine started, but where is the yellow wire? Thank you very much for the detailed video instructions. I got a slightly different kit, the frame was changed and engine protection was installed on both sides, but I didn’t install it and now I can’t unscrew the bolts, they slipped.
you can leave the yellow wire un connected.
yeah they need to add good quality screws. i also slipped some nowadays
I dont like how tail servo acting, Im having same issue
I have no issues with tail servo and mechanics. Works like a dream. Check your assembly and setup.
Hi sir, can i use this gts to other heli?
Yes, of course
hello, this GYRO is working with another helicopter???
yes it can
Where the setup on the tx16s!
a new setup for EdgeTx is coming soon
what's the deal with SB
SB Switch? :D