Thanks so much This really helped me because I couldn't connect, it's well understood. Please can you do add a gsm, gps and Lcd connection to that and post the video please I need it for my project urgently. Please I've subscribed and will be waiting for your notification
Dear respected brother, I am beginniner to use Arduino, sir i upload built-in led blink example sketch to Arduino uno and pro mini, both are blinking well, then I upload empty sketch to clear example code, system shows message that sketch upload done 100 %, but both boards runs previously blink example code. I tried to different systems (PC, Laptop,mobile) to clean an upload new sketch, but results are same, where I mistaken i don't understand. Pls help me to solve if you interested.
Once I take my hand it’s comming reverse but I want to stop the servo motor in one side..once I showed my hand pls explain how to change the code and pin settings
Hi. May i ask how do i change the code to make the ultrasonic sensor stop working for a minute after a detection and then able to make another detection?
you need to use a code named "delay" that creates a pause before doing another code running so doing "delay(1000) creates an 1 second pause so type "delay(60000)" this will create a 1 minute pause good luck doing that
Hi, your code always gives me an error message that says, "a function-definition is not allowed here before '{' token," and I cant fix it, can anyone help?
Like when hand comes it goes it one position , then when hand taken away nothing happens, again when hand comes it goes to the other position Like that?
help its not working it seas theres an error with the code this is the code; #include Servo servo1; int trigPin = 9; int echoPin = 8; long distance; long duration; void setup() { servo1.attach(7); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT);// put your setup code here, to run once: } void loop() { ultra_sonic(); servo1.write(90); if(distance
OMGG TQ BROO U SAFE MY LIFE TQ TQ SO MUSCH😭😭I'VE BEEN SEARCHING THIS ANYWHERE BUT I CANT FIND IT
thanks a lot it helped me to finish my project
👍👍👍👍👍
Thank you it helps me a lot, this is the one that Im looking for to finish my project..this is the only one that meets my project
Thanks dude, you help me a lot :D
U gave very good explanation bro. It helped me a lot.. Tnx bro
Thnx bro
Comming soon after lockdown
Love You brother Thank you so much ❤❤❤
Thanks you for help me😘
Very good,..bro 👌👌👌...
Thanks for sharing the code.It helped me a lot with my project.
What is the price of adrino
@@mgayathri8760 50$
400 to 600
@@raseengtech7388 no bruh its around $10
Sir please help me my project is not working
thanks
you are the best
love from sri lanka
Thank you very much bro
Thanks bro❤️😊
Bhai such mai kaam krta hai ye Thanks bto
thank u very much
Thanks so much
This really helped me because I couldn't connect, it's well understood. Please can you do add a gsm, gps and Lcd connection to that and post the video please I need it for my project urgently. Please I've subscribed and will be waiting for your notification
Hello Sir I have one question what's the language of the code you used?
Thanks 😊😊
Nice tutorial, but mine didn't work out. But nice job👍👍👍
Dear respected brother,
I am beginniner to use Arduino, sir i upload built-in led blink example sketch to Arduino uno and pro mini, both are blinking well, then I upload empty sketch to clear example code, system shows message that sketch upload done 100 %, but both boards runs previously blink example code. I tried to different systems (PC, Laptop,mobile) to clean an upload new sketch, but results are same, where I mistaken i don't understand. Pls help me to solve if you interested.
Very good video
Goood job
Thanku
Once I take my hand it’s comming reverse but I want to stop the servo motor in one side..once I showed my hand pls explain how to change the code and pin settings
Hi. May i ask how do i change the code to make the ultrasonic sensor stop working for a minute after a detection and then able to make another detection?
you need to use a code named "delay" that creates a pause before doing another code running so doing "delay(1000) creates an 1 second pause so type "delay(60000)" this will create a 1 minute pause good luck doing that
thanks
i liked
Thanks bro
thanks sir
Hello sir how can we adjusy the delay of servo?
how can i make the servo motor go slower
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ thank you
thanks
When I am code add and paste it saying arduino UNO bored was not founded
Thanks for the wonderful project sir,
Please can you help us so that we can use it with battery or other power source
We can use lithium ion battery 3.7 to 9 volt
Thanks
Welcome 🤗
bro two sensor or two moter ko kaise use kare plzzzzz replyyyy
Hi, your code always gives me an error message that says, "a function-definition is not allowed here before '{' token," and I cant fix it, can anyone help?
Meto
you forgot }
thanks a lot man but your talking is a bit rough to understand, thanks tho
:))
❤️❤️❤️❤️❤️
Meri problem solve ho gayi
Nice bro
Servo motor to agar 180 degree rotate karna ho to code ma kya change karna padega plz.. Tell
And if you can change in code then plz.. Send the code after updating it with my requirement it will be really very help full to me
Can we supply the power from 9v battery
Please reply
Yes .
Use Pawor supply 5v to 12v
Thank you
hey this works fine when I keep it pluged in but when I switch to a battery it doesn't work am I missing something?
I think u have to upload the code to the arduino
@@clx_ramzy8723 I did. think it had to do with the battery withdraw and the 9v not having enough power
@@StixUS that could also be a reason
@@clx_ramzy8723 hey um so can u guys help me its not working for me i did everything but still it doesnt work
@@StixUS hi plz help
Hum visa hi kare par us app me parssod mag raha hai
Can we replace servo motor by vibrating motor ?
Yes
But some minor modifications
@@mrscitechexperiment2903 want to know more in detail
hello, may i know the whole code now?
Hello!
Ok wait
When i upload the code to the arduino the servo moves but when i place my hand in front of it nothing happens
Same with me
Bhai metal detector ka code milega ?
Code kaise copy paste kre?
i want to make the servo stop at the exact position as soon as i remove the hand above the Ultrasonic sensor....HOW CAN I ACHIEVE THAT ....PLEASE HELP
Like when hand comes it goes it one position , then when hand taken away nothing happens, again when hand comes it goes to the other position
Like that?
Sir please mughe ultra sonic sensor +buzzer + Arduino ka video banao bhai school me le jana hai
Bro aap apna contact no is e-mail par send karo fahadansari3366@gmail.com
Good job
Apps install nhi ho rha h
Plz bhai mujhe aurdino programing sikha do 😭😭
Please attach the code here
code please
Help bro
Sir kam nahi Kara Raha ha
Not working... I tried many time
Mini not working
Bro troubleshooting a raha hai😢😢
It's not working sir
Bhai coda de deje please 🙏
Haloo
Hii.
Thanks for WATCHING
Thanks for comment
Apne friends ko bhi share kijiye
Bhaiya ji connection to koi bhi kar lega apne kahi code ko explaine kiya
Sir reply dijie
Ji sir boliye
help its not working it seas theres an error with the code this is the code;
#include
Servo servo1;
int trigPin = 9;
int echoPin = 8;
long distance;
long duration;
void setup()
{
servo1.attach(7);
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);// put your setup code here, to run once:
}
void loop()
{
ultra_sonic();
servo1.write(90);
if(distance
O
It shows error on upload ing
Send me screenshot this email fahadansari3366@gmail.com
Pleaseehelpm
koi kam nahi karaha
Nothing is working . Posting useless videos .
Bro try again. aap kuch galti kar rahe hai. Try kijiye
Thank you bro
Thanks a lot bro
Thanks broooo