Hello, I bought a Pavo 20. Before installing O3, I was flying with 2-cell and 3-cell batteries without any problem. But after installing O3, it does not fly at all with 2-cell batteries, and with 3-cell batteries, it flies at 90% throttle and with difficulty. where is the problem from ? I have a 2 cell battery : tattu 450mah 75c and a 3 cell battery : boslipo 650mah 95c
this may be happening if you are not flying? O3 unit overheats if you have it plugged in to a battery and not flying (like when you are working on the drone settings etc). Usually 1/2 mins and it overheats. If you fly, it is fine
You always have to remember, this is not a freestyle quad, it's a cinewhoop. It's in its nature to have propwash when doing tight freestyle tricks. For regular flying or even racing, there is no noticable propwash present with my pavo.
@@Mde7FPV I lose the video signal very fast (just a few trees or so, DJI O3). I thought that could help so the drone will not crash due to failsafe. But I am new to that and maybe it wouldn't help.
Hello, I bought a Pavo 20. Before installing O3, I was flying with 2-cell and 3-cell batteries without any problem. But after installing O3, it does not fly at all with 2-cell batteries,
and with 3-cell batteries, it flies at 90% throttle and with difficulty.
where is the problem from ?
I have a 2 cell battery : tattu 450mah 75c
and a 3 cell battery : boslipo 650mah 95c
Nice Video my friend 🎉
Nice Custom build. But i’ve build my own 4s pavo20 got 9 minut cruising and 6 minutes little freestyle with 4s 730mah
Wich Motors do you use ? And whats your total weight?
Please tell me what motors you use
110 grams. Motors are 1105 6000KV from betaflight. But any comparable will do as well.
Nice work
Has the DJI air unit 03 not given you overheating problems? For me it disconnects after 2 minutes due to overheating
No, that never happened to any of my 03's
this may be happening if you are not flying? O3 unit overheats if you have it plugged in to a battery and not flying (like when you are working on the drone settings etc). Usually 1/2 mins and it overheats. If you fly, it is fine
How about indoor? I am planning one mostly for indoors use , will the 4s be overpowered?
For indoors I'd leave it stock
@ stock means bnf version ?
@vatsalkonkani yes, the unchanged version, how it comes out off the box
@@Mde7FPV we have no supply for 3s from sellers. Only 2 batteries offered if i buy pavo. So i thought of 4s
@vatsalkonkani maybe choose some lower KV motors when using 4S batteries.
What is your dry weight?
Are you happy with your build?
Would you still go for it?
Without battery it's 110 grams. Yeah of course. It's tons of fun.
I made your pid settings, but when I put a little pressure on the throttle, there is vibration. Am I doing something wrong with the pid settings?
Check for loose screws first. Vibration is 90% due to something is not tighten good
@@Mde7FPV I constantly check them all, they are tight now, I looked again.
How bout flight time using this setup?
Depends on style of flying. Probably 4 minutes of cinematic cruising or 2 minutes of racing
Has Propwash improved by the 4s setup?
You always have to remember, this is not a freestyle quad, it's a cinewhoop. It's in its nature to have propwash when doing tight freestyle tricks. For regular flying or even racing, there is no noticable propwash present with my pavo.
@@Mde7FPV thx
Did you add a GPS module meanwhile?
I can't see why a 2 inch would need that
@@Mde7FPV I lose the video signal very fast (just a few trees or so, DJI O3). I thought that could help so the drone will not crash due to failsafe. But I am new to that and maybe it wouldn't help.
What port do you use to conect elrs?
I don't use ELRS, I'm on crossfire and I have it connected to UART 1