First you need analysis and design before start modeling part, This tutorial is modeling part in Tekla Structures software, For analysis and design you need to use Tekla Structural Designer or other Design software's, For design tutorial refer this video th-cam.com/video/jdE9z5I4hnM/w-d-xo.html
Sir could you tell me if the Created structural model in Tekla structures can it be exported to Tekla Structural designer for Design?? and further analysed & designed completely . Lastly how the analysis & designed results in Tekla structural designer is further Re-imported to Tekla structures for creating G.F.C detailed drawings & schedules using tekla structures.I would really appreciate if you could suggest a reference video over these process. I couldn't find any so far
Yes you can export model from tekla structures to tekla structural designer (or) you can import model from tekla structural designer to tekla structures, Import and Export options are available in menu bar in both software's but you can't import or export every thing. First you need to do design first in any software just like Tekla Structural Designer or Staad Pro etc refer this videos Tekla Structural Designer th-cam.com/video/jdE9z5I4hnM/w-d-xo.html Staad Pro th-cam.com/video/N94MIa4Lf3o/w-d-xo.html After that you need to do some more design calculation for connection and bolting manually or using few software's Later you need to do modeling and detailing in tekla structures or any other software's.
@@GaniSkSir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon
@@GaniSk @Gani sk Sir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon
@@allenfrostjames5521 Yes, that is possible as you mentioned, currently I don't have time to do video on it. I will make a video on it later. you can try to do that process.
You are welcome. This video only for how to create model and change sizes, but you need to create a model with design and analysis information for live project.
Fabulous video helps me to learn many new things.
thank you so much sir
lot love from Uttarakhand
Most welcome
Sir aisi hi video Hindi language mein upload kar dijiye ok.....😊😊😊😊❤❤
Thanks Bro, have just finish the video and practice along with it.
It is really helpful
Thanks a lot for a very informative and useful video :)
Glad it was helpful!
Bro you are the best Do you know ! Thank for free course!
My pleasure!
Good ,make tutorial for non uniform spacing of joist beams also.
Noted
Thanks alot , bro...
You are mostly welcome
sir very nice video, and I have doubt Is no need to analyse and design the beam, column and connections? please explain analysis and design
First you need analysis and design before start modeling part,
This tutorial is modeling part in Tekla Structures software,
For analysis and design you need to use Tekla Structural Designer or other Design software's,
For design tutorial refer this video th-cam.com/video/jdE9z5I4hnM/w-d-xo.html
THANKS SIR
Most welcome
Tqu bro...
You are mostly welcome
Sir could you tell me if the Created structural model in Tekla structures can it be exported to Tekla Structural designer for Design?? and further analysed & designed completely . Lastly how the analysis & designed results in Tekla structural designer is further Re-imported to Tekla structures for creating G.F.C detailed drawings & schedules using tekla structures.I would really appreciate if you could suggest a reference video over these process. I couldn't find any so far
Yes you can export model from tekla structures to tekla structural designer (or) you can import model from tekla structural designer to tekla structures, Import and Export options are available in menu bar in both software's but you can't import or export every thing.
First you need to do design first in any software just like Tekla Structural Designer or Staad Pro etc
refer this videos
Tekla Structural Designer th-cam.com/video/jdE9z5I4hnM/w-d-xo.html
Staad Pro th-cam.com/video/N94MIa4Lf3o/w-d-xo.html
After that you need to do some more design calculation for connection and bolting manually or using few software's
Later you need to do modeling and detailing in tekla structures or any other software's.
@@GaniSkSir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon
@@GaniSk @Gani sk Sir i thank you & appreciate for your elaborate reply . sir but sir I wish to get more clarity. First of all as you know that Tekla structures is really good in creating 3D models specially steel structure.Sir Please correct me if I am wrong in the process of what I understand of tekla software flowchart in the overall . To begin first i would create 3D model using Pre-assumed member sections & available connection details in Tekla structures and then further i could export that 3D model into Tekla structural Designer for Analysis & Design .. so after the analysis & Design if all the sections passes then it's ok but if it fails then I will change & choose higher member sections in particular . Finally sir i shall export the designed Model into Tekla structures for reinforcement & detailing & G.F.C drawings. I request you kindly make a full fledged video of these process of creating 3D model & exporting it into Tekla structures Designer for Analysis & design . Then again exporting the designed structural Model from Tekla structural Designer into Tekla Structures for Detailing, Drawings. Sir as you know we can create connection details in Tekla structures for steel structure 3D-model but I wish to know if i can check if connection details are passing in analysis & Design in Tekla structural Designer or do I have to use any perticular plugin for checking the strength of the connection details ?? If so how to do that? Expecting your reply soon
@@allenfrostjames5521 Yes, that is possible as you mentioned, currently I don't have time to do video on it. I will make a video on it later.
you can try to do that process.
@@GaniSk Fine sir , hope you take out some time & make a video over that process..We look forward for a detailed video soon
I'm diploma&B.E civil 2019 holder , I joined Tekla course near me in weekend batch. Which things are more important to notice while learning?
Good
Thanks
superb thanks a lot sir
but i want how to create GA and fabrication and single part mark drawing and erection drawing
and how to create anchor bolt and template drawing
and how to create deck sheet and deck slab in rcc
how to show and create drawing and show in drawing
sir very great video which enviornment yourbusing
in teckla US environment cannot switch in mm so how
Indian Environment
If you want to use in mm units then use US metric environment or Indian environment
ohk sir thank you I watch your videos. actually i m learning modeling
@@qaisnaik8544 You are most welcome
TNX BRO
You are welcome
sir the connection u made is moment or shear connection ? end plate 144?
Shear connection
@@GaniSk sir ,, which shld i used for moment connection ,,, or pls give the link where u provided
thanks for the video, how can you select sizes and thicknesses without any analysis?
You are welcome.
This video only for how to create model and change sizes, but you need to create a model with design and analysis information for live project.
Thanx
Welcome
GIVE ME MORE VIDEOS SIR ON TEKLA SOFT
INTRESTING
Sure, stay tune.
Dear Brother How to create tapered Main Beam ?
plz tell me
ok, I will do video on it
Please info, name Environment you used??
Indian Environment
Can I practice this tutorial on tekla structures old version
Yes, you can
UB are not coming in that options
Why this one comes us environments?
I didn't get your question clearly,
I have selected US(United States) Environment for this example project.
Sir May u provide a small US structural Design pdf for learning purpose for beginners
WHEN CHANGING THE BOLT SIZE , IT SHOWS NOTHING , JUST DEFAULT. NO SIZE OPTIONS LIKE 12,16. HELP ANYBODY?
You are in blank environment. To get bolt size you should install environment as per your country. like US environment or UK environment.
UB 457x191x67 kg beam these types are beams are not coming in the options
To get this UB type of profiles, you need to select UK environment in Tekla Structures.
can u design my work?
Shortcut keys for tekla
how to add ismb profile ??
To get ISMB profile, you need to select Indian Environment while open Tekla Structures, instead of select blank or other environments.
@@GaniSk thanks a lot. i think its not in educational software rigt??
@@imhamsgroup1677 you can do same thing in education software also, but you need install environments separately as per county standards.
Plz kannada tutorial sir
Sir can i have installer of tekla apps?
Yes, refer this video th-cam.com/video/CS2nkOqtpVg/w-d-xo.html