DIY Smooth Weld Look On A Bicycle Frame / Step By Step Procedure Cheapest DIY Smooth Weld

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 228

  • @prasansakprasansak6169
    @prasansakprasansak6169 6 หลายเดือนก่อน +2

    ผมชอบผลงานของคุณที่สุด❤

  • @BlueredYT413
    @BlueredYT413 ปีที่แล้ว +1

    Nag mukang carbon ah nice galing

  • @linojrfruelda9014
    @linojrfruelda9014 2 ปีที่แล้ว +1

    Galing boss. Salamat naka idea na ako kung paano gawin

  • @reymartalano370
    @reymartalano370 2 ปีที่แล้ว

    Astig haha ganda ng result nito. 😁😁😁

  • @Kuneho
    @Kuneho 2 หลายเดือนก่อน

    if you are worried about small scratches before painting, why not use surfacer from samurai and sandpaper till smooth

  • @joshuamarcia2123
    @joshuamarcia2123 2 ปีที่แล้ว +1

    Solid grabe Galing

  • @mhanel30
    @mhanel30 2 ปีที่แล้ว +7

    Epoxy primer lang yung tinitimpla, pahid mk sa area ng well kapalan mo agad. Tapos lihain kesa filler. First atemp mo pa lang mlinis n agad yung welded area then pwede k n mag aply ng smurai primer.

    • @mhanel30
      @mhanel30 2 ปีที่แล้ว

      You end up hving too much process and many days. But still well done pa din in a first try.

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      salamat sa bagong idea pwede pala un👍

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      oo nga matagal talag ung pinaggagawa ko😂
      atleast next time may bagong idea na ako
      🙏salamat sa suggestion

    • @peaceall3671
      @peaceall3671 2 ปีที่แล้ว

      sir magkano po ung epoxy primer parehas lang ba un sa masilya?

    • @archiecobre5680
      @archiecobre5680 2 ปีที่แล้ว

      Mga Boss nag-experiment po Ako. Mas madali gamitin Ang Water Stop.

  • @crisjomarbasarte6033
    @crisjomarbasarte6033 2 ปีที่แล้ว +1

    Parang carbon na dating smooth welding na sya tignan

  • @shezaragrag1648
    @shezaragrag1648 2 ปีที่แล้ว +1

    Nalike ko na ganda talaga ng mga videos mo lods :), dame ako natututunan,.. Lods pwede din ba gamitin amg oracal 651 sa stencils sa bike, wala kasi ako mahanap na oracal 641

  • @Tinaganjr
    @Tinaganjr 7 หลายเดือนก่อน

    Boss tanong lang ok din po ba yung nonsag epoxy pang smoothweld boss??

  • @lifeisyasuo1482
    @lifeisyasuo1482 ปีที่แล้ว +2

    idol tanong kolang kung ano maganda grit pag smooth talaga balak ko narin mag repaint ng bike ko chaca ano grit kaylangan pag sa na ginamit mo na pang smooth wild chaca ilang araw halos lahat pag ka tapos mag repaint

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      panoodin mo itong link
      para mas maintindihan mo ung grit ng mga liha
      th-cam.com/video/rywIIQTYr9M/w-d-xo.html

  • @alfonsopatrickluigi6228
    @alfonsopatrickluigi6228 2 ปีที่แล้ว

    Sir pwede yan kamayin para kuminis. basain lang ng slight daliri saka ihagod sa epoxy para di na gaano karami lilihain kasi napakinis na ng daliri. Ganun po ginawa ko sakin hehe

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      ayun bagong idea❤️
      salamat sa iyong komento, gagawin ko yan sa susunod na frame ko
      anong epoxy ginamit mo sir?

    • @alfonsopatrickluigi6228
      @alfonsopatrickluigi6228 2 ปีที่แล้ว

      @@chrisworxcustoms epoxy all purpose po binili ko yung nasa lata po. 135 pesos bili ko.

    • @norvss
      @norvss 2 ปีที่แล้ว

      @@alfonsopatrickluigi6228 kamusta sayo sir wala ba naging bitak pag tagal?

  • @archiecobre5680
    @archiecobre5680 2 ปีที่แล้ว

    FYI po mas may madali gamitin na pang smooth weld. Sing tigas din ng semento at bakal pag natuyo. Madali pa ilapat. Konting liha ok na.

  • @MalcomKenMarinas
    @MalcomKenMarinas 6 หลายเดือนก่อน

    Boss ano ginamit mo para matangal ang pintura

  • @JAEGAMING940
    @JAEGAMING940 5 หลายเดือนก่อน

    Saan location mo boss pwede ba magpa gawa

  • @leodgreat827
    @leodgreat827 ปีที่แล้ว

    Boss musta nman performance, hindi ba natanggal ang epoxy? Nagbitak ba?

  • @imaizumishunsuke5334
    @imaizumishunsuke5334 ปีที่แล้ว

    Gusto ko sanang gawin ean kaso baguhan palang ako pagdating sa bike hindi ko pa nga kaya mag tanggal at paano ikakabit uli mga parts ng bike if ever na gayahin ko ean, gustong gusto ko talaga na na maging smooth weld yung bike ko:( sana gawan mo ng tutorial paano mag baklas at paano mag kabit uli boss

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      nasa sayo kung gusto mo talaga matuto, lahat naman nagsisimula sa walang alam, basta matyaga at pursigido ka talagang matuto at gawin ung bagay na gusto mo magagawa mo
      may mga luma or ibang videos ako na nagbabaklas at nagbubuo ng bike

  • @Channel-ir3el
    @Channel-ir3el ปีที่แล้ว

    Lodi pwede pa kaya kapalan yung lagay ng epoxy bandang bottom bracket para magmukang carbon yung frame😂

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      nasa sayo naman kung ano gusto mo gawin
      basta kaya mo gawing maayos

  • @Ustinooo
    @Ustinooo 2 ปีที่แล้ว

    Boss big fan mo ako.. tanong lang. Pwede ba gamitin ang body filler( polituff) pang palapad ng frame para magmukhang aero?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว +1

      pwede naman, un naman usually ginagamit din sa mga sasakyan

    • @Ustinooo
      @Ustinooo 2 ปีที่แล้ว

      @@chrisworxcustoms salamat lods!! Abangan ko susunod na mga uploads mo♥️. Request po, gawa ka naman video about dun sa tanong ko haha

  • @freddcharlballarta3211
    @freddcharlballarta3211 ปีที่แล้ว

    Nga pala sa butas butas na maliit pwdi mo gamitin yung used na parang straw ng wd40 kung kasya

  • @albertmahilum9741
    @albertmahilum9741 2 ปีที่แล้ว +1

    LODS TUTORIAL SANA PANO MAG REPAINT NG KAGAYA SA DEVEL META NA PHILIPPINES Edition ung prang PH flag .sana ma notice

  • @mattobando0703
    @mattobando0703 ปีที่แล้ว

    Boss, pwede parin ba pang trail yung mga nakamasilya? Hindi ba bibitak kapag natatagtag?

  • @rafhaelgines3296
    @rafhaelgines3296 ปีที่แล้ว

    kamusta naman po sya sir ngayon po di naman po ba sya nagccrack pati paint incase malubak

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      not sure sa condition
      pinagawa lang kasi yan

  • @yourl0nglostfather
    @yourl0nglostfather 5 หลายเดือนก่อน

    does this work on alloy frame bikes or just steel ones?

    • @chrisworxcustoms
      @chrisworxcustoms  5 หลายเดือนก่อน

      yes also works on steel frame

  • @johnaustinsaddi5297
    @johnaustinsaddi5297 2 ปีที่แล้ว +2

    ano yan lods sunpeed triton?

  • @trololove1297
    @trololove1297 ปีที่แล้ว

    Hello. Tanong lng po pwd po ba to gamitin pang cover sa nayupi na bike frame? Salamat sana masagot

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      yes pwede, parang masilya din naman yan

    • @trololove1297
      @trololove1297 ปีที่แล้ว

      @@chrisworxcustoms ok po salamat

  • @wenifredocristo3574
    @wenifredocristo3574 ปีที่แล้ว

    Boss pede bang gawin na rekta n Yung ipinahid mo sa may pintura na tlaga para di ko na kalasin Ang bike lilihain ko nlang at pinturuan ulit

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      pwede naman kaso huwag mo ng asahan na maganda magigung resulta
      di din maganda kalalabasan kung kulang kulang din preparasyon mo
      kung di mo din babaklasin ung bike parts
      magpapagod ka din magbalot ng scotch tape trabaho un
      kung babaklasin mo trabaho nga pero mas maayos mong mapinturahan

    • @wenifredocristo3574
      @wenifredocristo3574 ปีที่แล้ว

      Alloy Po ba yan o steel Kasi s akin steel Po Kaso Yung 2nd na pahid ko is bukol bukol na Yung expoxy kaya panget na Po

  • @exp1396
    @exp1396 ปีที่แล้ว

    pwede gumamit ng normal primer tas tapal ng epoxy or need ko pa tlga ng epoxy primer tas primer surfacer??

  • @vangelaobli
    @vangelaobli 2 ปีที่แล้ว

    boss, may tutorial ka pano tanggalin yung palitada sa welding ng frame? nung nag repaint kasi ako, di natanggal ng ng liha at stripsol eh.

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      bakbakin mo lang ng spatula, tyagaan nga lang

  • @ferdielazaro6122
    @ferdielazaro6122 2 ปีที่แล้ว

    Boss pasig may bunga po ba kayo ? san dun sa Suarez ba yun boss.

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      Stella Mariz po malapit
      msg nalang po kayo sa page kung may ipapagawa

    • @ferdielazaro6122
      @ferdielazaro6122 2 ปีที่แล้ว

      Sge po sir alam ko yan lugar nyo taga rosario lang po ako eh

  • @KiellaurenceBayhon
    @KiellaurenceBayhon 21 วันที่ผ่านมา

    Pwede ba? Poineer epoxy all purpose

    • @chrisworxcustoms
      @chrisworxcustoms  21 วันที่ผ่านมา

      try mo muna mag mix at magpahid sa testing piece
      tapos pag tumigas tignan mo kung madaling lihain

  • @TWKRboy
    @TWKRboy หลายเดือนก่อน

    Hi from Korea!
    Great video overall
    I also really want to do this to my aluminum road bike. I have several questions. If you respond than it will gonna help me a lot!
    1. I want to know each grit you used process(sanding before primer, and after the color coat!)
    2. I actually dont have experience with sanding. How do you recognize the timing to change the grit?
    You will save me from all the concern if you reply for my question 🥲

    • @angieee-
      @angieee- 18 วันที่ผ่านมา

      changing the grit depends on how the surface feels
      so mostly it ends to the one who is currently doing it
      mainly for smoothing 1000 grit was used
      and for main sanding it varies from 100-500 grit

    • @angieee-
      @angieee- 18 วันที่ผ่านมา

      and if you have absolute no experience in grinding firstly used 1000 grit since its not the roughest so you could get the actual feel and results of your own sanding
      and sorry i was the one who reply instead the OP

  • @collincordero5922
    @collincordero5922 2 ปีที่แล้ว

    Boss pwd ba yan sa merun ng pintura
    Pwd bang masilyahan yung may pintora na?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      pwede naman basta lihain mo lamg mg maayos ung part na lalagyan mo ng masilya

  • @Ghanzboy23
    @Ghanzboy23 2 ปีที่แล้ว

    Lods primer ba ng alloy frame at steel parehas lang?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      kung specific primer
      etch primer para sa aluminum
      red oxide primer sa steel
      pero both pwede sa epoxy primer

  • @Iann_n20
    @Iann_n20 9 หลายเดือนก่อน

    Ilang grit gamit mo boss???

  • @JM-fb4jb
    @JM-fb4jb 2 ปีที่แล้ว

    Sawakas gumawa ka nadin nito idol salamat

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      😁noong January ko pa yan na project, medyo busy lang kaya di agad nakapg edit ng mga vids😅

  • @johnericrasasto4927
    @johnericrasasto4927 ปีที่แล้ว

    Boss ,pwede po bang mag lagay nang epoxy sa bike kahit nandyan parin Ang paint na orig? Steel po bike ko

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      pwede naman, lihain mo lang muna bago magtapal ng epoxy

  • @mugiwarab0y362
    @mugiwarab0y362 2 ปีที่แล้ว

    Idol ano masmaganda na pang spray paint samurai o bosny

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      same lang depende na sa budget mo, kung gusto mo extra tibay gamit ka samurai 2k series primer at clear coat

  • @reymarksagadalrado149
    @reymarksagadalrado149 2 ปีที่แล้ว

    Pwede puba epoxy steel kahit anong brand?

  • @fidelreactions
    @fidelreactions ปีที่แล้ว

    okay lang din po ba yung kulay gray na ipang masilya?

  • @johnmarkpaz1282
    @johnmarkpaz1282 2 ปีที่แล้ว +3

    boss parang ang gastos masyado sa primer, Pede ba epoxy (gagawing smooth welding) muna tapos lilihain tsaka paprimeran ?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว +7

      ung mga nakikita ko kasi na mga gumagawa sa sasakyan
      primer, filler, kinis, surfacer
      pag makinis na lahat tska color
      ung ginawa ko medyo experimental pa at first time ko din gawin, kaya magastos nga😂
      after ng unang primer pwede naman kahit wala muna surfacer, filler na agad

  • @stanleygagarin8665
    @stanleygagarin8665 4 หลายเดือนก่อน

    Boss ilang spray can po ng primer nagamit nyo?

  • @yazawagaming
    @yazawagaming ปีที่แล้ว

    Sakin po masilya ginamit ko mag bibitak po kaya Yun?

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      actually mas ok ang masilya, kasi design sya pang body filler talaga

  • @alfredcayetano4047
    @alfredcayetano4047 ปีที่แล้ว

    pwede ba gamitin yan sa malalim na gasgas lods tapos pinturahan

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      pwede, parang body filler din or masilya

    • @alfredcayetano4047
      @alfredcayetano4047 ปีที่แล้ว

      oo lodi pang masilya halimbawa nabagsakan ng tools o tinamaan ng bato yong frame tapos natuklap ang pintura.

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      @@alfredcayetano4047 kung sa paint chip pwede din naman

    • @alfredcayetano4047
      @alfredcayetano4047 ปีที่แล้ว

      last na tanong na idol bali nagrepaint kasi ako ng frame ng bike ko.. zamurai paint ginamit ko tapos matte black na yong final coating ko.. so pag tanggal ko ng stencil ko medyo mga nakaangat at matalas dun sa mga gilid ng decals ng pinagtanggalan ng stencil... ok lang ba lihain yon para maging smooth sya at pag flinat clear ba sya mwwala yong nga gasgas ng liha??

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      @@alfredcayetano4047 kung di naman masyadong halata kahit wag mo ng galawin
      kasi kung lilihain mo pa kailangan marahan at pinong liha gagamitin, isa pa dapat di ka din masobrahan sa liha baka mangupas naman
      kung maayos mo naman maliha mawawala naman ung scratches galing sa liha kapag nagclear coat

  • @yvesherrera5508
    @yvesherrera5508 ปีที่แล้ว

    Boss pwede ba kung primer grey lng?

  • @phil5073
    @phil5073 หลายเดือนก่อน

    Magkaiba po ba ang primer at surfacer?

    • @chrisworxcustoms
      @chrisworxcustoms  หลายเดือนก่อน

      somehow yes
      ung primer lang nakasulat usually ginagamit sa mga bare materials, like metals, plastics etc.
      ung primer surfacer naman usually gamit kapag may kailangan kang habulin na uneven areas tapos lilihain pa, at kung ung pipinturahan mo eh papatong mo sa may lumang pintura

  • @crammynoodles9545
    @crammynoodles9545 ปีที่แล้ว

    Just finished watching, Im wondering how much did you spend all in all? estimate is okay..

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      for the filling and sanding process
      roughly 10 hours accumulated I think,
      plus the hours of resanding and painting
      estimate maybe 15 to 20 hours
      but the process that I've done for this video is just a trial and error, because after that I already had done another 2 projects and that time I used a body filler, it took me less than 5 hours to finish the filling and sanding process
      soon I will upload those videos

  • @aeronmanatad1173
    @aeronmanatad1173 ปีที่แล้ว

    Kakapit po ba to sa cracked chromoly frame?

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      kung crack na
      weldeing mo nalang
      kumbaga yan eh pangtapal lang at pang dikit sa mga maliit na bagay, pag frame na bike eh ibang usapan na

  • @RaraIsRalphCorpuz
    @RaraIsRalphCorpuz ปีที่แล้ว

    safe lang po ba ito master gawin or may risk na rurupok yung parts ng pinagdugtungan nung weld spots na nililiha?

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      ung epoxy naman ung mostly nililiha
      sa mga bagong frames ngayo na lumalabas "smooth weld" na ung mga design kaya ok naman

  • @Theredplatformdude
    @Theredplatformdude 3 หลายเดือนก่อน

    10:35 are you using water only?

    • @chrisworxcustoms
      @chrisworxcustoms  3 หลายเดือนก่อน

      nope, it's a primer surfacer to fill up the small holes

  • @seantamse9124
    @seantamse9124 2 ปีที่แล้ว

    Pwede po ba yung epoxy all purpose?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      kung ung pula na tube, medyo matagal tumigas un
      mas ok yang epoxy steel mas mabilis

  • @eidan_pogi373
    @eidan_pogi373 2 ปีที่แล้ว

    Pede bayan lods kung may yupi yung frame kahit maliit lang?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      yes pwede naman para pumantay, check mo ung isang project ko sa GT frame nilagyan ko ng ganyan ung mga dents

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      th-cam.com/video/Dz_FxOJgfpc/w-d-xo.html

    • @eidan_pogi373
      @eidan_pogi373 2 ปีที่แล้ว

      @@chrisworxcustoms ah cge salamat may yupi frame ko eh ewan kopo bakit

  • @Claymoreisalluneed
    @Claymoreisalluneed ปีที่แล้ว

    Ilan lahat nagamit mong spray can sir?

  • @klrk8533
    @klrk8533 2 ปีที่แล้ว

    pwede ba lods itapal yung epoxi sa malalim na gasgas

  • @raymundquintos4966
    @raymundquintos4966 2 ปีที่แล้ว

    boss ask ko lang kung pwd ung ginamit mong epoxy sa alloy drop out

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว +2

      kung gagamitin mo bilang pandikit sa biyak, hindi din uubra
      kung pantatapal mo lang para maging smooth pwede

    • @raymundquintos4966
      @raymundquintos4966 2 ปีที่แล้ว

      @@chrisworxcustoms ano idol gagamtin ko sya para mawala ung bakat nang skewer bumaon na kasi. d ko kasi mapakita ung pic pero sana maintindihan mo maraming salamat

    • @raymundquintos4966
      @raymundquintos4966 2 ปีที่แล้ว

      @@chrisworxcustoms ung bakat pala nang axle sa drop out nang frame

    • @utaotempoklo9933
      @utaotempoklo9933 2 ปีที่แล้ว

      @@chrisworxcustoms Bo's saanpo Kayo naka powisto bakapo mag pa ripent din ako sa inyo

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว +1

      @@raymundquintos4966 pwede un pang filler lang ulit
      pero natural lang na babakat lang ulit ung skewer kasi hinihigpitan un

  • @benedicksangabriel2623
    @benedicksangabriel2623 ปีที่แล้ว

    what paint thinner do You use?

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      for the paint to be mixed?
      I only use lacquer thinner for rinsing steel frames or mixing it with paint stripper
      I don't mix thinner for the paint, because it is ready to use

  • @Cris-nh2js
    @Cris-nh2js 2 ปีที่แล้ว

    Lods anong size ng liha gamitin pag masilya yung linagay para maging smooth

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      grit po tawaga dun
      150 para sa pagliliha ng masilya

  • @markdoran5307
    @markdoran5307 2 ปีที่แล้ว

    Hindi ba mabibitak yung epoxy idol

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      may naka experience na daw nagbitak, not sure lang sa ganyan, wala pa naman concern ung nagpagawa kung may nabitak na, baka wala pa naman😅

  • @chanyantv6001
    @chanyantv6001 2 ปีที่แล้ว

    Anong paint remover gamit mo lods?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      samurai paint remover, medyo mahal at bitin sa isang frame,
      stripsoll pa din para tipid

    • @imjelo
      @imjelo 2 ปีที่แล้ว

      @@chrisworxcustoms Mahapdi pag natalsikan ng natuklap pintura pag gamit ang Stripsol. Dapat may naka-handang liquid dish soap. Para pag na-talsikan hugas agad. Ganun ang ginawa namin ng kaibigan ko sa bike frame na binigay sa akin. Pag nakaramdam ng hapdi hugas agad. Ika nga ng advertisement ng Band Aid nung araw, *"Walang Aray"* . 😊

  • @jhoncarlvailoces6700
    @jhoncarlvailoces6700 2 ปีที่แล้ว

    Bossing pwede ba sa alloy yan?

  • @khiro4559
    @khiro4559 2 ปีที่แล้ว

    okay lang ba kung vulca seal gamitin sa pangtapal sa welding?

    • @laurencemorales6955
      @laurencemorales6955 2 ปีที่แล้ว

      Hahahaha masisira pang tapal lang un sa yero

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      kung pwede lihain baka umubra, kung gusto mo talaga mag experiment ka muna sa ibang surface

  • @ritsterjirald3102
    @ritsterjirald3102 2 ปีที่แล้ว

    Boss ano gamit mong paint stripper?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      samurai paint remover
      kaso mas sulit sa stripsoll

  • @exp1396
    @exp1396 ปีที่แล้ว

    pwede ko bang i apply ung epoxy sa normal primer lng? budget ako ih huhu

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว +1

      pwede naman, basta may primer

    • @exp1396
      @exp1396 ปีที่แล้ว

      @@chrisworxcustoms ty sa mabilisang reply ngayon kasi ako bibili ng epoxy steel eh para masimulan ko na ung project HAHAHAHA

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว +1

      salamat din sa panonood, Goodluck sa project👍

  • @kingjashleebanaria1281
    @kingjashleebanaria1281 ปีที่แล้ว

    Saan nabili ang epoxy steel nayan?

  • @lindsayceydie6896
    @lindsayceydie6896 2 ปีที่แล้ว +3

    does it still need wet sanding even if the frame is steel?

  • @dyannie1899
    @dyannie1899 2 ปีที่แล้ว

    Pwede ba yung polituff dito idol?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว +1

      yes, un talaga ginagamit ung mga body filler, medyo experimental lang yang video

  • @mekeniabe44
    @mekeniabe44 2 ปีที่แล้ว

    Lods pabulong nman first step to pinish

  • @vincentvirtudes7813
    @vincentvirtudes7813 2 ปีที่แล้ว

    Sir asan po location nyo?

  • @markfernandez6126
    @markfernandez6126 2 ปีที่แล้ว

    Ilang epoxy nagamit mo kuys

  • @weniemasangkay3894
    @weniemasangkay3894 ปีที่แล้ว

    ILANG EPOXY STELL NA GAMIT MO IDOL??

  • @gieraldsamson8083
    @gieraldsamson8083 2 ปีที่แล้ว

    Kala koba 65 pesos lang kuys?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      P65 nga lang ung epoxy steel
      magkano ba sa inyo?

  • @johnrhay7767
    @johnrhay7767 2 ปีที่แล้ว

    Meron bang pang alloy?

  • @maynardchristianvera6541
    @maynardchristianvera6541 2 ปีที่แล้ว

    Boss paano po yung pagbuild mo ng bike stand mo? Salamat sana po mapansin💯🙌

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      browse po kayo sa old videos, may tutorial

  • @justoapostol7724
    @justoapostol7724 2 หลายเดือนก่อน

    Master pde magpagawa sayo?

    • @chrisworxcustoms
      @chrisworxcustoms  2 หลายเดือนก่อน

      nagstop muna ako sa repaint
      puro bike skin service muna ako
      follow mo ako sa FB page for updates
      thanks

  • @wenifredocristo3574
    @wenifredocristo3574 ปีที่แล้ว

    Steel frame Kasi s akin para maging tingin carbon namn

  • @elloiseyvonnebaricuatro169
    @elloiseyvonnebaricuatro169 2 ปีที่แล้ว

    Boss ilang taon bago ka crack yan

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      not sure, depende siguro sa pag gamit, kung lagi tagtag siguro mas mabilis, pwersado din kasi ang BB part kakapedal

  • @zyramaemartinez5544
    @zyramaemartinez5544 2 ปีที่แล้ว

    boss pwede ba lagyan ng epoxy sa small crack ng alloy frame?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      kung gagamitin mo as pandikit sa biyak at tumibay no
      kung pantapal mo lang para hindi halata pag pininturahan yes
      ibang usapan na pag nagcrack ang aluminum

  • @unlitulakunlipadyakunliahonnoi
    @unlitulakunlipadyakunliahonnoi 2 ปีที่แล้ว

    New Subscribers idol dumaan YT channel mo nakita ko content mo soid galing idol God blesss keep safe idol
    Magkanu pagawa niyan sayo idol.??
    😊😊💪💪💪☝️☝️🙏🙏🙏🙏👍👍👍🙌🙌🙌🙌🌈🌈🌈🌈☀️☀️

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      maraming salamat po sa panonood🙏
      depende po sa design at paint na gagamitin PM niyo nalang po sa page ko ung mga details ng gagawin sa frame

  • @renzmunoz6775
    @renzmunoz6775 2 ปีที่แล้ว

    Boss san mo nabili yang epoxy mo

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      sa puregold

    • @renzmunoz6775
      @renzmunoz6775 2 ปีที่แล้ว

      @@chrisworxcustoms boss wala bayan sa shoppe bibili sana ako ehh

  • @arlenealmanzor7292
    @arlenealmanzor7292 2 ปีที่แล้ว +1

    Boss mag pagawa ako sau

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      message po kayo sa FB page ko para sa mga details ng ipapagawa niyo

  • @rossganda
    @rossganda 2 ปีที่แล้ว

    dapat po ata epoxy muna bago nag primer sayang kc

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      mas makapit po ang epoxy kapag may primer
      medyo mali lang na dapat hindi ko muna binuo ung coating ng primer sa buing frame at napakinis ko muna dapat ung epoxy bago ko pinatuyo para hindi na mahirap lihain, pero once kasi magliha ka ninipis talaga ang pintura kasi hahabulin mo ung kinis, kaya kailangan din talaga na patungan ulit ng primer
      try niyo po manood ng ibang video about sa body fillers kung ano ba talaga mauuna👍

  • @Daaikii
    @Daaikii 2 ปีที่แล้ว

    anong tawag/brand dyan sa nilagay mong epoxy steel para sa bibili sa harware

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      ipinakita din po sa video
      "Gecko" ung brand name

  • @jheboymontecarl618
    @jheboymontecarl618 2 ปีที่แล้ว

    kala mo tuloy carbon looks yung frame ..

  • @janmarkcorpuzmariquit3570
    @janmarkcorpuzmariquit3570 2 ปีที่แล้ว

    As in epoxy lang need lods?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      yup medyo hinay lang din sa pagtimpla
      pag naparami mas matagal lihain
      pwede din pala epoxy primer ung tinitimpla

  • @johncedrickengeres9601
    @johncedrickengeres9601 ปีที่แล้ว

    Di sya nababasag?

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      not sure, pero wala naman bad feedback ung may ari

  • @HINRICHdwayneHinaloc
    @HINRICHdwayneHinaloc 5 หลายเดือนก่อน

    8:37 anong tawga dun sa epOxy

    • @chrisworxcustoms
      @chrisworxcustoms  5 หลายเดือนก่อน

      epoxy steel
      watch mo buong vid para sa complete details

  • @imjelo
    @imjelo 2 ปีที่แล้ว

    Pwede kayang i-apply muna yung epoxy bago pintahan ng primer, then saka mag-paint flooding?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      yes pwede naman, ung mga nakikita ko kasi nagpaint mga sasakyan primer muna bagi masilya

  • @paucruz276
    @paucruz276 2 ปีที่แล้ว

    Kaya po bang icover ang headtube bottom bracket pati sit stay ang 65 pesos na epoxy or need 2 or more?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      baka kaya naman, kasi yang nagamit ko may natira pang halos kalahati

  • @freddcharlballarta3211
    @freddcharlballarta3211 ปีที่แล้ว

    Bakit inuna primer bago epoxy?

    • @melchyboyfun863
      @melchyboyfun863 ปีที่แล้ว

      Yun nga sir. May pagka shunga din tong creator na to. Pinagloloko lang tayo. Ahaha

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      @@melchyboyfun863 isa ka pala sa 48k viewers nitong video ko na naloko😂
      salamat sa panonood, nabayaran nanaman ako ni TH-cam🙏
      MelchyBoy🤭nood ka sa ibang channel, huwag ka dito magkalat, bawal bastos dito, kinukuha agad ni Lord
      God Bless your poor soul

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      mas makapit sa pintura ang epoxy, un ung mga napanood ko sa mga construction workers na gumagamit ng fillers or epoxy

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว

      @@melchyboyfun863 gawa ka ng sarili mong video tutorial MelchyBoy😅 tignan natin kung magaling ka nga, baka sa pag comment kalang magaling MelchyBoy😂

  • @haumea237
    @haumea237 2 ปีที่แล้ว

    Total cost po?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      kung sa full repaint hanggang matapos
      more or less 2k sa materials
      paint, epoxy, sand paper etc.

    • @haumea237
      @haumea237 2 ปีที่แล้ว

      @@chrisworxcustoms tnx

  • @eddywaw2497
    @eddywaw2497 2 ปีที่แล้ว

    Boss pwede mag pagawa haha magkano?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      depende po sa details na gagawin, msg niyo nalang po sa page ung mga gagawin

  • @mugiwarab0y362
    @mugiwarab0y362 2 ปีที่แล้ว

    Idol kailangan ba lagi wet sand gamitin

  • @jeffbuduan5481
    @jeffbuduan5481 2 ปีที่แล้ว

    Pwede ba sa alloy na frame idol?

  • @dyannie1899
    @dyannie1899 2 ปีที่แล้ว

    Ilan bote ng samurai primer magagastos sa isang buong frame and fork?

  • @InojLycer
    @InojLycer 2 ปีที่แล้ว

    Anong paint remover po gamit?

  • @anonymously241
    @anonymously241 ปีที่แล้ว +5

    Sa labor pa lang at materials ay makakabili kana ng bagong frame 🤣😂

    • @chrisworxcustoms
      @chrisworxcustoms  ปีที่แล้ว +1

      pabulong kung saan makakabili 😁

    • @jeoffnishiyama2315
      @jeoffnishiyama2315 ปีที่แล้ว

      Dilang naman yan yung binabayaran jan skills den tska nakaisip

    • @MLDple
      @MLDple 9 หลายเดือนก่อน +2

      Alam mo po sa custom paint...nasusunod mo yun desire mong design and color..bibili ka 2nd hand frame puro gasgas naman wala din..sa custom paint di naman pricey compare sa bagong frame..

    • @TitoTure-bx3gb
      @TitoTure-bx3gb 5 หลายเดือนก่อน

      Lo dudo ! Aquí sale una fortuna y el esfuerzo vale la pena.

  • @nishimiyasbf631
    @nishimiyasbf631 2 ปีที่แล้ว

    pangit po lagyan ng epoxy yung downtube madali po macacrack tulad sa tropa ko nilagyan niya nalamg ulit ng epoxy

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      ouch, ganon pala un, noted po ito salamat sa info

    • @nishimiyasbf631
      @nishimiyasbf631 2 ปีที่แล้ว +1

      @@chrisworxcustoms mtb po kasi yun tinitrail niya po yun ata dahilan

    • @likmaasz590
      @likmaasz590 2 ปีที่แล้ว

      ccrack talaga yun since nasstress un pag trail, usually pag smooth weld mtb frame, head tube and sa may seatpost lng yung naka smooth weld e. Btw anong brand ginagamit niyo pang tapal ng weld?

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      @@nishimiyasbf631 ah kaya pala

    • @chrisworxcustoms
      @chrisworxcustoms  2 ปีที่แล้ว

      @@likmaasz590 kaya pala nga sa head at seat tube lang talaga may mga smooth look
      gecko epoxy steel ung ginamit