Hi, do you know why the mju 1 might not be advancing the film? When I load the film it makes a sound like the film is advancing but then the camera still reads as Empty. I checked and the wheel that hooks into the film isn’t moving.
Good friend It goes that way because it's flexible on the near side of the lens that's broken So it couldn't work on one of the mechanical parts And it plays a vital role for all its functions We hooked it up to a small copper Yet very difficult
I might be able to answer this, mine was doing the same thing and the gears appeared to be too worn down to interlock with each other after removing the plate covering the gear system (needed a soldering iron to do that). Your best bet is to find another one that isn't working and make one working one from the two.
Hello, i have an olympus mju zoom and it worked for a while. Now the lens just comes out a bit and directly goes back in, if I turn the camera on. On the small screen on the top it shows an E. You know how to fix it?
Good man The E mark on the screen indicates that there is damage to one part of the camera And it is usually found on the lens And it is very difficult to fix this series camera
Hello! I have an Olympus Infinity Stylus zoom 115 dlx that has been working for me for over a year. recently it stopped turning on because the sensor thing that turns the camera on and off when you open the sliding door isn’t working. the part came off. How can this be fixed? i have the piece that came off
Om Gugun, saya ada Mju 1, fungsi normal, cuma kalo abis foto/jepret, yang dibagian tempat roll, dia muter tapi ada suara kenceng gitu. Bisa dibenerin gak kira-kira om?
Hello, Do you know how to put back together the 3 parts for the closing door system for a Mju Zoom 35-70? There is a big curved piece in which goes the small one withe the arrow (showing the sens to open it) and the spring. And this is my problem : how to mount the spring in it. I didn't find any repair manuel for that model. Thank you. Regards
Hello friend What do you mean lens doors or movie doors A broken piece of copper can be made with a small diameter and heated soldering iron Then the back door of a normal film yes I made from the broken flas light material,body flas ya is good enough to make film door locks The design can be with a file and synthesize a compound with soldering iron and reinforced with glue I hope this helps my friend By manual gugun in Java Indonesia
@@gugunmanualchannel1253 Hello, thank you for your answer. I'm talking about the left side of the door, where there is the button to open it. I attach here 2 links of photos for you to understand what I'm talking about. You will see on one photo 3 part (2 plastic part easy to put together + 1 spring). I dont know where to put the spring in it. The 2nd photo is the side of the camera where all these parts go. Thank you. mega.nz/file/tsUSjLab#lcQhIP6htdfGJPGM9xFbrPiGQ4LwWOqhTBl2Ls3Z1yc mega.nz/file/98FkRBTT#loqZJGfsXUbdg8WWu2DONXa_MrKC4XVzfDfnoxDkNSA
For now I can't do much And can't get me the vibe Because I'm now a month from lockdwon by corona So work at home. For camera practice at work And cannot go to the kingdom We can go back to work at the beginning of the month Contak ke to no whatsapp 08118047700 only At the beginning of the month I send ya video via whatsapp or lnstagram manual gugun into follow follow so that you can send the video later
Kaga bisa di servis kang Pada masa jayanya juga jarang ada yang mau terima servis untuk Camera itu Sbb part ya kaga ada Hanya distributor resmi ya saja yang punya
Hello people, I recently bought this Olympus zoom 140 , and apparently everything is working, but when I put a roll of film on it, it doesn't open the lens and just keeps this 3 blinking on the screen, can anyone tell me what this could be?
Hello back friends For a series camera, it is very vulnerable to damage Because the camera life is quite long Almost all Pointshot camera series that use Zoom And the damage is in the lens, yes, the diaphragm is flexible, yes, it's broken So it can't Shutter It's very difficult to repair this series camera It's better to buy one that doesn't use a zoom lens, okay? It's better to wear it longer I hope this information is useful, my friend
Asikk mantap om 🔥🔥🔥 part 2 nya ditunggu yaaa
Hi, do you know why the mju 1 might not be advancing the film? When I load the film it makes a sound like the film is advancing but then the camera still reads as Empty. I checked and the wheel that hooks into the film isn’t moving.
Good friend
It goes that way because it's flexible on the near side of the lens that's broken
So it couldn't work on one of the mechanical parts
And it plays a vital role for all its functions
We hooked it up to a small copper
Yet very difficult
I might be able to answer this, mine was doing the same thing and the gears appeared to be too worn down to interlock with each other after removing the plate covering the gear system (needed a soldering iron to do that). Your best bet is to find another one that isn't working and make one working one from the two.
Hello,
i have an olympus mju zoom and it worked for a while. Now the lens just comes out a bit and directly goes back in, if I turn the camera on. On the small screen on the top it shows an E. You know how to fix it?
Good man
The E mark on the screen indicates that there is damage to one part of the camera
And it is usually found on the lens
And it is very difficult to fix this series camera
Hello! I have an Olympus Infinity Stylus zoom 115 dlx that has been working for me for over a year. recently it stopped turning on because the sensor thing that turns the camera on and off when you open the sliding door isn’t working. the part came off. How can this be fixed? i have the piece that came off
ok mate
For this series the disease is in the lens
That is, the flexible diaphragm breaks, causing other functions to not function normally
I have an lt-1 with fungus in the viewfinder,would it be an easy operation,or difficult?
It's hard to fix ya man
And to open yes is risky
Om Gugun, saya ada Mju 1, fungsi normal, cuma kalo abis foto/jepret, yang dibagian tempat roll, dia muter tapi ada suara kenceng gitu. Bisa dibenerin gak kira-kira om?
Boleh om
Biasa ya gir ya patah
Japri aja 08118047800
Hello, Do you know how to put back together the 3 parts for the closing door system for a Mju Zoom 35-70? There is a big curved piece in which goes the small one withe the arrow (showing the sens to open it) and the spring. And this is my problem : how to mount the spring in it. I didn't find any repair manuel for that model. Thank you. Regards
Hello friend
What do you mean lens doors or movie doors
A broken piece of copper can be made with a small diameter and heated soldering iron
Then the back door of a normal film yes I made from the broken flas light material,body flas ya is good enough to make film door locks
The design can be with a file and synthesize a compound with soldering iron and reinforced with glue
I hope this helps my friend
By manual gugun in Java Indonesia
@@gugunmanualchannel1253
Hello, thank you for your answer. I'm talking about the left side of the door, where there is the button to open it.
I attach here 2 links of photos for you to understand what I'm talking about.
You will see on one photo 3 part (2 plastic part easy to put together + 1 spring). I dont know where to put the spring in it. The 2nd photo is the side of the camera where all these parts go.
Thank you.
mega.nz/file/tsUSjLab#lcQhIP6htdfGJPGM9xFbrPiGQ4LwWOqhTBl2Ls3Z1yc
mega.nz/file/98FkRBTT#loqZJGfsXUbdg8WWu2DONXa_MrKC4XVzfDfnoxDkNSA
@christian monnet for spring that place ya inside the door hook ya
Take it easy. learn how to work. yeah
For now I can't do much
And can't get me the vibe
Because I'm now a month from lockdwon by corona
So work at home.
For camera practice at work
And cannot go to the kingdom
We can go back to work at the beginning of the month
Contak ke to no whatsapp 08118047700 only
At the beginning of the month I send ya video via whatsapp or lnstagram manual gugun into follow follow so that you can send the video later
@@gugunmanualchannel1253 I know that it goes in the door, it's an evidence. But I don't know where. Anyway...
What size of screwdriver did u use?
No 0.75
Om, sorry tipe yang ini kalau shutternya stuck udah gabisa diperbaiki ya?
Masih bisa diusahakan
om, aku punya olympus MJU ZOOM nih. Tapi shutter ga aktif sama zoom juga ga jalan. kira2 bisa diservice ga yah om?
Kaga bisa di servis kang
Pada masa jayanya juga jarang ada yang mau terima servis untuk Camera itu
Sbb part ya kaga ada
Hanya distributor resmi ya saja yang punya
My camera works but the flash will not flash.
Can I fix this?
It's very difficult to fix the flas section
Because the component factor is already very difficult to get
Om gmn caranya kalau per kecil yg di tutup on off hilang
Biasa pakai karet gelang di potong secukupnya
Om kalau ada light leak putih itu, apa bocor di lensa ya om? klau iya apa bisa di benerin , terimakasih🙏🏻
Bisa jadi di back door ya
izin tanya om jenis kerusakan di kamera analog full auto yang masih bisa dibenerin itu apa aja ya om, thanks sebelumnya om
Jarang bisa diperbaiki
Kalah sama seperpat ya
Clean lensa MJU zoom brapa om gugun?
Tidak bisa
Om klo stuck di lensa kluar masuk mjuii bisa benerin? Mjuii nti ku kasih kanibalannnya juga buat dikanibalin ke kamera saya... Bisa ?
Untuk seri ini semua kerusakan ya sama
Tidak bisa diperbaiki
Pnya saya olympus mju II, udh dipasang baterai baru tp gak nyala. Lama off nya juga sih. Masih mulus dan lengkap padahal
Untuk seri ini banyak rusak di elektronik ya bang
Bg kamera olympus tg5 masuk air laut apa masih bisa di service,?
Kl kena air laut kaga bisa bang
Sbb porosi trus dalam ya kl di bersihkan
Hi, can i send my mju to your for service/repair?
yes friends We haven't received this series camera service for a long time because it's hard to get parts
@@gugunmanualchannel1253 yes mean i can send it for repair?
Hello people, I recently bought this Olympus zoom 140 , and apparently everything is working, but when I put a roll of film on it, it doesn't open the lens and just keeps this 3 blinking on the screen, can anyone tell me what this could be?
Hello back friends
For a series camera, it is very vulnerable to damage
Because the camera life is quite long
Almost all Pointshot camera series that use Zoom
And the damage is in the lens, yes, the diaphragm is flexible, yes, it's broken
So it can't Shutter
It's very difficult to repair this series camera
It's better to buy one that doesn't use a zoom lens, okay?
It's better to wear it longer
I hope this information is useful, my friend
Aku punya Olympus mju ii tapi udah mati gatau matot apa gimana, itu bisa di service gak?
Sudah lama tidak terima mju ii
Sbb susah banget pengerjaan ya
You must be crazy. You just had to place a film inside bro
No friend
In the repair technique
Movies and batteries must be issued
If there are films and batteries, the film will be damaged, bro
kalo flash off bisa di service om?
Tidak punya part ya
@@gugunmanualchannel1253 harus bawa kaninbalanya ya?
Lokasi dmn om?
Jakarta pusat om
Untuk tepat ya bisa japri 08118047700
Om menerima servis dari luar kota gak ya ?🙏
Hampir semua konten ya dari luar kota
Kita workshop ya di jakarta pusat
08118047700
Bang, punya saya abis dibawa ke gunung kok malah suka rewind sendiri ya? Kira2 bisa dibenerin ga?
Biasa ya ada switch yang berembun
Sudah tidak terima perbaikan untuk mju ya
Sbb sangat beresiko
Dan part ya juga susah lama tidak dapat lagi
I have a mju 1 and it locks when the film passes
For this series the malfunction of the motion picture sensor ya is no longer working
Buang la music tu
Sudah lama tidak pakai lagi
Aaaaaaaaaand it’s junk.
Just throw it away my friend