Had an auger start slowing down like that on a 9770. It eventually wouldn’t go back. Was a teflon ring in there it spins in that got worn out, broke and bound it up. Dealer had to pull whole auger off and replace it
I can definitely tell that you're dragging at the end of this video. Unfortunately I've had to work a day every now and then on very little sleep. As long as you make it through the day, that's a win. Keep up the good work!
Hayden, you're back - YAY 🎉 I've missed your daily videos. I hope all is well. Cody, thank you for the grain cart shots and greasing ♥️ Very kewl drone video again, as always. Thank you and have a great day Hayden, Tessa and crew ♥️♥️♥️ - Hope
Great job Cody. Just want to say hi to Cody from another Pa farmer. Keep up the good work. You make us proud. Fantastic drone footage. Thanks and stay safe
Your videos are the best online for the portrayal of how these machines operate and produce the quality that they can. Very well done Hayden, and I see that Deere them selves are watching along with us. Beautiful crop your in right now, very jealous not to be there with you! 👍
there should be a 4th zert on the PTO shaft right in the middle for the shaft for telescopeing . It's under that long plastic tube covering the middle of the shaft, there should be an oval cut out in the cover, you'll have to extend or collapse the shaft to get the two layers of cut out to line up but it's there you'll find the zert. and to think about it the CV joint on the front(tractor) end should have 3 zerts, 1 on each "cross T" and one on the disc housing for the centering disc :)
zert, zerk, fitting, nipple, kind of like soda and pop id depends what crowd you grew up with as to what they called it, the people I grew up around called it zert and fitting :)
I had a combine that had the same problem with the unloading auger returning slowly and I found that the home limit switch was stuck in the home position ! I cleaned it up and everything worked fine ! Yours may not be the same, hopefully it’s an easy fix !
Looks to me like the difference in cut is just how low there running there headers to ground and reel hight/speed lifting the down crop. All just adjustments on the go.
Again, an amazing video. Really like the drone pictures! Also, nice to see other parts of the operation. And Cody needs a battery powered greasegun ;) The wheat bag was cool! When do you start international shipping of merch? Greetings from Norway :)
Hey Hayden.... Glad you're back! Missed your videos buddy. Your drone footage is always awesome... So two Cody questions... Why does he have to use a hand pimped grease gun when you all get the powered grease guns? Second Cody question... is Cody the fouth G in 4G harvesting? Looking forwRd to your next video. Get some sleep! You all stay safe out there!
Yes, they may hold more. If not you could add extensions. We run them because we cut in places that have low trees and it would be a pain to get up and take them down every time lol. Also easier on move day.
We need more Cody Cam. He did a great job explaining what he was doing. The drone footage was great.
Cody needs a battery powered grease gun for Christmas
Great update Hayden! Enjoyed hearing from Cody also!
Had an auger start slowing down like that on a 9770. It eventually wouldn’t go back. Was a teflon ring in there it spins in that got worn out, broke and bound it up. Dealer had to pull whole auger off and replace it
Loved the video and drone footage. Really impressed with your dad’s knowledge on the combines and equipment. Stay safe
I can definitely tell that you're dragging at the end of this video. Unfortunately I've had to work a day every now and then on very little sleep. As long as you make it through the day, that's a win. Keep up the good work!
Hayden, you're back - YAY 🎉
I've missed your daily videos. I hope all is well.
Cody, thank you for the grain cart shots and greasing ♥️
Very kewl drone video again, as always.
Thank you and have a great day Hayden, Tessa and crew ♥️♥️♥️ - Hope
I love watching how everything comes together during the harvest
Hayden the limit switch I was referring to wasn’t the home limit it was the slow down limit so the auger doesn’t slam into the cradle !
Does anyone else hear something like oop at around 11:15 😂. Great video as always.
MacDon MFG proudly manufactured in Winnipeg Manitoba Prairie Tough Watching from SW Manitoba
Great job Cody. Just want to say hi to Cody from another Pa farmer. Keep up the good work. You make us proud. Fantastic drone footage. Thanks and stay safe
Nice to see Emma is doing OK 😊
Your videos are the best online for the portrayal of how these machines operate and produce the quality that they can. Very well done Hayden, and I see that Deere them selves are watching along with us. Beautiful crop your in right now, very jealous not to be there with you! 👍
We're in the midst of a drought here SW of Chicago. Send that rain down our way.
It’s great to see y’all back , I really enjoy watching your videos .
Give thanks to Cody for taking the camera. I liked the Emma cameo. Is north Dakota your last stop on the custom harvest circuit.
Believe I saw a little wave from Ag with Emma in the drone footage! 😊
Watching from Winnipeg Manitoba Canada, home of MacDon
there should be a 4th zert on the PTO shaft right in the middle for the shaft for telescopeing . It's under that long plastic tube covering the middle of the shaft, there should be an oval cut out in the cover, you'll have to extend or collapse the shaft to get the two layers of cut out to line up but it's there you'll find the zert. and to think about it the CV joint on the front(tractor) end should have 3 zerts, 1 on each "cross T" and one on the disc housing for the centering disc :)
What is a zert?
zert, zerk, fitting, nipple, kind of like soda and pop id depends what crowd you grew up with as to what they called it, the people I grew up around called it zert and fitting :)
It's referring to the fitting they use to grease the bearings.
Hello from California thank you for your videos HaydenOnHarvest you are the best
Thank you for your kind words
I had a combine that had the same problem with the unloading auger returning slowly and I found that the home limit switch was stuck in the home position ! I cleaned it up and everything worked fine ! Yours may not be the same, hopefully it’s an easy fix !
I don't know how combines are wired exactly, but a stuck limit switch, or prox not working correctly would absolutely have that symptom!
Great vid. Super drone footage and nice music. Well done
amazing video guys. thank you
Glad to see you back!!!
Beautiful slo-mo camera work
Ngl, those drone shots were awesome🔥🔥
Looks to me like the difference in cut is just how low there running there headers to ground and reel hight/speed lifting the down crop. All just adjustments on the go.
Thanks for the Cody cam. Keep it up.
Great video Hayden! Good job buddy!
We finished up harvest here about 2 weeks ago
Again, an amazing video. Really like the drone pictures! Also, nice to see other parts of the operation. And Cody needs a battery powered greasegun ;) The wheat bag was cool! When do you start international shipping of merch? Greetings from Norway :)
I need scooby doo in my truck, ASAP!😂
They sure have a good crop out there. Ours is good as well just no price. It's all going into the bin. Hopefully price improves. Enjoy your videos.
Your drone shots are killer. Really love the video man, how did you get into this?
How much more harvesting before heading back to Texas?
There was a post on TH-cam about a new larger header that macdon are bringing out, didn't get a chance to read it
Great video. Talk about your equipment. Where you live. Family history
Hey Hayden.... Glad you're back! Missed your videos buddy. Your drone footage is always awesome... So two Cody questions... Why does he have to use a hand pimped grease gun when you all get the powered grease guns? Second Cody question... is Cody the fouth G in 4G harvesting? Looking forwRd to your next video. Get some sleep! You all stay safe out there!
Hayden............Time to get Cody an Electric powered grease gun my old son.
Another great video & drone shot. JD might want to contact you for a promo drone video!! Great to see "Cody Cam" in action.
That would be awesome!
I agree, the drone shots were amazing!
I said that a long time ago. I think that would be awesome.
Your auger turret is not good anymore.......... that's why it's slow.
Turrent.........spell check....
$1600 Bucks. You are kidding me. Are JD going that bad?
@@anzacday4141 I too thought that was pretty steep ! Would be tempted to go to another brand !
Is it hail or soflies?
@@skydom1000 could be both but from what I understood it is hail
Kody Nice sunglasses 🤦🏻♂️
When are we going to get a day of dad cam
🇺🇸 Keep up the good work and keep on farming 😅!! 🚜🌾🚜🙏
Emma!!
Very good video!
Please put the flags back up so we can see the difference of company’s.
@@drewwagner9584 they broke 😞
That's sad.
Hi 👋
how's come Cody has to use a hand pump crease gun?
I miss your daily videos also, but i'm guessing you have a distraction with you this year.😊😊
👍👍
What kind of Mic was so bad?
Hayden. Why Dibbs?
Did the farmer change to folding bins this year. what is the advantage
Yes, they may hold more. If not you could add extensions. We run them because we cut in places that have low trees and it would be a pain to get up and take them down every time lol. Also easier on move day.
Are yall going to get a 3d machine?
🤷🏽♂️
Macdon are hinged drapers
Everyone and their mom knows whenever someone’s talking about “the new hinged drapers” they are referring to John Deere…