Cancer ms: 3d printed arduino humanoid robot for beginners.
ฝัง
- เผยแพร่เมื่อ 10 ต.ค. 2020
- robotnuts2020.blogspot.com/20...
www.thingiverse.com/thing:466...
cults3d.com/en/3d-model/gadge...
Project: Cancer ms
Type: mini size humanoid robot
height: 17cm
Weight: 400g+-
dof: 16
price: RM210 - 260 (USD50 - 65)
Components : , esp32 dev board(doit) x1=RM22.9, 7.4v 450mah 25c lipo x1=RM21.4,charger x1=RM16, jst plug(depends on battery) x1=RM1,mini 360 voltage regulator x4=RM26.5, micro switch x1=RM1(estimate), m2 screws =RM10(estimate), petg filament=RM10(estimate) ,Total RM108. 8
Robot price without controller (estimate) :
Mg90s version :
RM108.8 + RM102 = RM210.8 = USD 50.59
Sg92r version :
RM108 + RM146.9 =RM255. 7 = USD 61.37
Suitable servo: sg90s, sg92r, mg90s
Micro controller: esp32
3d file: drive.google.com/file/d/1oSE5...
Music: Alive
Musician: @iksonmusic - วิทยาศาสตร์และเทคโนโลยี
Ive been always interested in those humanoid walking/fighting robots, since I was a kid. It was one of the reasons that made me pursue my Control Engineer degree, now that i have a better understanding of eletronics i was searching on youtube if I could finding any sort of data to help me with the first steps. It took me a while but i finally found the perfect chanel, thank you very much for your work!
Yes ! good work :)
Keep it up.
Impressed, Subscribed 👍, It's my dream to make my own Humanoid Robot, incase if u can guide , I'll be very thankful to you 😊
Very good
Nice😎
This is so awesome, thank you so much.
You're welcome.
Now this is another level.
Dude your right this is so cool
Omg he has so many real robots
Great design I will sure try this ... One question which screw u used M2 ? Of what dimensions actually I am getting many results so dimensions will be helpful. Thx
like like good
Karkinos ss I will try this but right now I will go for cancer because mg996 will cost me more than expected..
"Diymore" Mg996r will be like usd$3 /pieces.
en los archivos están mal algunas piezas
Are you going to upload video that robot is moving with sg90 and motor controller ?
I do made one with ts90a servo(lower spec than sg90),
th-cam.com/video/jtfIHytee-0/w-d-xo.html ,but those plastic gear break too easily, so, I rather using mg90s even though it a bit heavier.
The piece at 1:01 is missing from the stl files, can you please put it up when you get the time? Thank you.
Re-download the file and look for lower body. Thanks for the notice.
@@tangwoonthai no problem, thank you too.
Can you teach me how to program multi servo?.
I'm using the source code from
robojax.com/learn/arduino/?vid=robojax_ESP32_Servo-1
Did you use m2 screws?
Yes
@@tangwoonthai thanks
Like M2 screw 8 mm ?
M2 6mm 8mm 10mm 12mm 16mm, seen the DM mg90s is very expensive now, almost same as DM Mg996r,
You can try Karkinos SS, it's bigger and tougher, although it cost eur 10 for the 3d file, but it's screwless designed, the money you save for the screws should cover it.
Oh my jesus
This is a real robot
Does blender let you make step. File?
No, it not.
@@tangwoonthai thanks, its ok i will download blender.
I didn't know blender was free.
Yes, it free, and very easy to learn.
I saw you comment asking for the picture of MOD servo at notifications , but couldn't find it in comment section, so i put it here, drive.google.com/file/d/1eX2y3Zh_6lRMFmxA6-E5EJU3ezqsqf9T/view?usp=drivesdk, but I not sure the servo you got are same as my, better watch where the motor circuits go before you cut it. Of course, it won't break even if you connect the terminal opposite, just reverse it when malfunction.
@@tangwoonthaihello, I want to assemble this robot, I really liked it, what details do you need? fees or something else?
pelo título é um robo que dá cancer