@@kevingalea92 yes these are definitely fun. I have a lot of big trucks but I still like to run the little trucks. They’re really cheap to fix. Also, thanks for the comment. Thanks for checking out the videos. Have a good day.💯👍🏾
nice truck brother definitely going to grab one after watching your video and see what its about. I like your upgrades as well might have to grab those wheels u have makes truck look real sweet!!!
Thank you sir for the kind words just make sure when you get these wheels you get them with an offset half inch offset or some kind of offset or else it will rub the hugs thank you for checking out the videos. Have an awesome day. Appreciate you.🙏🏾💯👍🏾
Did you have to cut the back of the body in order to make the wing fit if you didn't which parts did you use. And did you also have to modify the part that goes in the body post for the body post to sit low enough like it's supposed to
I don’t think I cut the body it’s been so long can’t really remember didn’t modify the body post if search you tube u can find all the parts they have a few vids on the wing mod thanks for checking out the vids 💯👍🏾
@@rcsfinest1883 okay I just think it's impossible to do it without cutting the back because the mount go above the rear bumper and this thing sets all the way down to the top of the rear bumper
Runs great no issues when you buy the wheels make sure you purchase the ones that have an offset. If not they will rub but if you can’t find the ones with an offset just go on eBay or Amazon and buy some hex extensions. that will solve the rubbing that’s what I had to do because I first purchased the ones with no offset and it was rubbing went on Amazon and bought some extensions some hex extensions and that was it. Thanks for checking out the video. Appreciate you.🙏🏾💯👍🏾
Hi the wheel are duratrax six pack 2.8 make sure you get them with an offset or they will rub and the wing is a Arrma Kraton 4s wing and wing mount thanks for checking out the vids 💯👍🏾
@@2blades_rc650 Ok no problem its all the parts used from the Arrma kraton 4s center brace go on Horizon hobby and order all the center brace parts fron the kraton 4s thanks...
Awesome vid, which T-bone racing front bumper did you use? Is that the TBR XV5 Front Bumper for ARRMA Big Rock 6s and if so, did it bolt right up or did you have to make some modifications to make it fit? Thanks in advance. Aloha.
Your Big Rock really looks kick-ass. Loving all the mods. I am looking for a front bumper for mine, and I really love the look of the model you have. Although I cannot find this on the TBR website -- do you know the model number, or for which RC model the bumper was for? The dual bars makes it look super aggressive, and it looks like it will serve its purpose well. If I had to guess, it may be the "TBR XV4 Front Bumper - Losi Rock Rey * 37195"
Hi thanks for checking out the vid Go on Amazon and get some hex exstenders you need to offset the wheels I had the same problem cause when I purchased the wheels I purchased with no offset Amazon and you will good.💯👍🏾
Thanks for the comment the Shock mounts are from GPM Racing and the rear spoiler is from the Arrma Kraton 4s just purchase all wing parts for that car on Horizon Hobby hope that helps thanks for checking out the channel...
New sub, also with a Big Rock and also with a rear wing (not yet fitted). Great to discover the channel. Servo failed recently so upgraded that under warranty to a faster 30kg Etronix.
I use a dual charger cause I normally run 6s just depends on the use single battery or dual battery check horizon hobby or your local hobby shop thanks for the sub and comment 🙏🏾💯👍🏾
@@burn1gotbeats Forgot to tell you if you haven’t bought these wheels yet make sure you purchase the ones with a half inch offset or else it will hit the hubs I learned that the hard way.
Agree on not going with 17mm. Just another $30 that you do t need to spend. Nice truck. I like mine just getting it going. My first ESC was garbage. They just sent another. Horizon was really quick about it. Hats off to them for sure.
Yes thanks for the comment I’ve had nothing but great customer service from horizon yes I really like the truck very fun hit that sub for more vids God Bless...
I just found your channel and I like your content. Where can a get one of those center braces that you put on the big rock. Is it off another arrma model? Then do I need the mounts also? Thanks for the help. Stay safe and God Bless you and your family.
Wow thanks for checking out the channel I really appreciate you all the parts are from the Arrma Kraton 4s find on eBay or horizon hobby maybe on Amazon not sure any other help u need don’t be shy reach out I’ll help you out and God Bless u and the family as well 🙏🏾💯👍🏾
@@rcpd3157 Ok the ones I had was from Typhon build I did a couple of years ago that’s kinda odd that they say for granite/big rock and don’t fit ok so if you have any longer rod end I would just use those I had that problem on another build I did and it worked well hope that helps...
Nice build! Do you have the Duratrax PN for the wheels and tires? I searched the keywords you used and got a LOT of different results. Would help. Thanks!
Thanks for the comment the wheels are Duratrax DTXC5520 Six Pack MT 2.8 2WD Mounted 1/2 inch Offset 12mm hex make sure you get the ones with an offset or they will rub the hubs thanks for checking out the vids 🙏🏾💯👍🏾
Yes thank you for the comment I put one on my arm Krato 4s and so far it’s doing pretty good and I also put one on my arm a typhon build I did that’s doing pretty good so I decided to use it on this one too yeah came out nice God bless and have a good day .
@@user-in4xs2fv8j Thanks for the comment These are the DuraTrax DTC5520 six pack MT 2.8 with a half inch offset 12 mm hex. Make sure you get them with the offset or else they’re gonna rub the hubs.Thanks
@@rcsfinest1883 Can you inform me of the model numbers for the direct fit wing and wing mount you used? I don’t want to have to cut the body like others have did in their videos.
@@rcsfinest1883 are you sure this doesn’t require the body to be cut? I looked up the part numbers and, although different part numbers, they look identical to the mounts that others use and that require the body to be cut. Thanks.
No perfect set up u will need hex ex’s tenders these wheels have no offset so make sure u get them with an offset all stock no gear change just went bigger pinion thanks for stopping by God Bless...
Does that chassis brace actually really help a lot to prevent damage or is it more for looks? Ive bent a motor mount on my big rock after a month of owning it and it makes me wonder if something like a chassis brace would have helped prevent that. I definitely want those adjustable shock tower braces too, those are rad. Also what benefit is there to switching from the stock metal turnbuckle arms to aluminum? I want to pit aluminum pivot balls on mine but the stock turnbuckle arms seem decently tough.
The chassis brace definitely helps with a plastic chassis and all the other plastic parts to reduce a little flex as far as the turn buckles it’s a nice option to reduce the flex and be a little stronger I’m not a big basher so I’ll leave the testing to those who bash hard😄👍🏾.
@@przemyslawnowakowski9863 12mm to 20mm Wheel Hex Hub Adapter Extension For 1/10 RC Crawler Scx10 D90 thats the ones on ebay little modifying to make fit tho drii the hole out a little bigger to go over axle thanks...:)
@@niccomaniatty9421 The offset is the depth of the hex when you order it will tell the offset just make sure you order the one with the offset because if you don’t you’re gonna have to use a spacer like I did thanks
Hi I have got the same wheels as u and since fitting them I get a wobble front one of the front wheels have u noticed this with urs since fitting them? Is it normal untill the tyres bed in
Hi mate I just received my wheels and tyres the same as u have in this video also I have the 12mm hex nuts and they don’t go all the way back on the shaft. They only go over half way on the shaft and stop and the shaft goes abit bigger can u help me here as I am stuck. What did u use on urs mate ?
It is worth discussing the topic here because I see that you take care of the models and improve them, most of them do not, only repair.The extreme bashing and smashing of these great models is an artificially created fashion that ruins the pockets of amateurs, especially young ones who have no idea to drive and dont understand the idea of it. THAT YOU WILL NOT BREAK EVERYTHING SO THE IS IN RC AIRPLANES AND FAST DRONES THAT AFTER ONE CRASH ARE A PIECE OF JUNK...Very nice improvements you,ve made - it would be nice to put the links with this extras ...Thanks
Love the build man I own the same car with a few mods I love it. Highly recommend a set of mt rockets for some mucking around the house or skatepark, wow I didn’t even know they made a 6s mate that’s the first I’ve heard of it love it hahahabi got some study to do Watching from Australia 🇦🇺 Have you had any issues with the wheel coming off at random intervals Mate Keep up the excitement, nothing wrong with getting side tracked lol 😂 Hit me back mate
First of all...Long time youtube viewer, first time visiting your page and instantly subscribed. (I see you fam😉) I got me a HG-P408 hummer as my first RC rig and my girl loved it so much she went out and got one of these bad boys. (I think she wanted to out do me on speed but she won't admit it😏. Even though mine is a crawler and this one is a basher...) However, Now we are about to be out there ripping it up together... even if she is about to be WAY faster than me Smdh. We both are subs now to your channel learning about the RC world. So keep up the good work and keep showing us the hottest vids for our new favorite past time.
Me again... If I was to get another rig in the basher style what would you suggest that would run neck and neck with this one without me getting the exact same thing? I have a crawler already but if I wanna go basher what's my options out there for a good equal playing field? All advice is welcome. I gotta keep up with da misses. Lol
@@brucewayne3157 I would look at the Kraton 4s or Traxxas maxx it really depending on your budget and if u want to run 4s or 3s a lot to choose from I hope I have been a little help thanks for stopping by the channel 💯👍🏾
God bless you as well brother! I have one of these coming tomorrow and I haven't had this feeling since I was a child on Christmas Eve night!
Yes God Bless as well I know the feeling u will love it it’s a blast any help with it u let me know 🙏🏾💯👍🏾
@@rcsfinest1883 will do my friend.
With all my big 6s I still have a lot of fun with my 3s trucks so I know exactly what you are saying lol
@@kevingalea92 yes these are definitely fun. I have a lot of big trucks but I still like to run the little trucks. They’re really cheap to fix. Also, thanks for the comment. Thanks for checking out the videos. Have a good day.💯👍🏾
nice truck brother definitely going to grab one after watching your video and see what its about. I like your upgrades as well might have to grab those wheels u have makes truck look real sweet!!!
Thank you sir for the kind words just make sure when you get these wheels you get them with an offset half inch offset or some kind of offset or else it will rub the hugs thank you for checking out the videos. Have an awesome day. Appreciate you.🙏🏾💯👍🏾
Did you have to cut the back of the body in order to make the wing fit if you didn't which parts did you use. And did you also have to modify the part that goes in the body post for the body post to sit low enough like it's supposed to
I don’t think I cut the body it’s been so long can’t really remember didn’t modify the body post if search you tube u can find all the parts they have a few vids on the wing mod thanks for checking out the vids 💯👍🏾
@@rcsfinest1883 okay I just think it's impossible to do it without cutting the back because the mount go above the rear bumper and this thing sets all the way down to the top of the rear bumper
Beautiful aesthetic and useful upgrades.
Thank you for the kind words I appreciate you 🙏🏾💯👍🏾
Are the wheels direct replacement, and how does it turn, any rubbing?
Runs great no issues when you buy the wheels make sure you purchase the ones that have an offset. If not they will rub but if you can’t find the ones with an offset just go on eBay or Amazon and buy some hex extensions. that will solve the rubbing that’s what I had to do because I first purchased the ones with no offset and it was rubbing went on Amazon and bought some extensions some hex extensions and that was it. Thanks for checking out the video. Appreciate you.🙏🏾💯👍🏾
May i know the brand and sizes of the wheels/tires please? And where can i buy the wing you installed? Thanks for the help.
Hi the wheel are duratrax six pack 2.8 make sure you get them with an offset or they will rub and the wing is a Arrma Kraton 4s wing and wing mount thanks for checking out the vids 💯👍🏾
Do another video and do links for what parts you did! I love that chassis brace
Thanks for the comment what parts you need let me know and I’ll help you with the company name thanks for checking out the channel...
@@rcsfinest1883 i would like to put the center brace in my big rock
@@2blades_rc650 Ok no problem its all the parts used from the Arrma kraton 4s center brace go on Horizon hobby and order all the center brace parts fron the kraton 4s thanks...
Checked GPM rc. Doesn't look like they offer the shock tower brace anymore. Is there somewhere else you know that still offers this upgrade?
Yes they still make them look under big rock crew cab 4x4 blx thanks for checking out the vids 💯👍🏾
Very very nice simple and clean.
Yes and that’s exactly what I was building simple and clean and thanks for checking out the vids I appreciate you 🙏🏾💯👍🏾
Awesome vid, which T-bone racing front bumper did you use? Is that the TBR XV5 Front Bumper for ARRMA Big Rock 6s and if so, did it bolt right up or did you have to make some modifications to make it fit? Thanks in advance. Aloha.
Yes this is the one no it’s a direct fit and works great thanks for checking out the vid please sub for more builds🔥💯
Your Big Rock really looks kick-ass. Loving all the mods. I am looking for a front bumper for mine, and I really love the look of the model you have. Although I cannot find this on the TBR website -- do you know the model number, or for which RC model the bumper was for? The dual bars makes it look super aggressive, and it looks like it will serve its purpose well. If I had to guess, it may be the "TBR XV4 Front Bumper - Losi Rock Rey * 37195"
Great unboxing video my rc friend 👍💪😁
Thanks and thanks for stopping in glad you enjoyed it...
I like that bumper on front looks like it would stop some bad stuff
Yes T Bone makes some great products it’s definitely a must thanks for the comment
The wing is the truth, it's fast and the rims is phat
Yes looks and runs awsome thanks for checking out the vids God bless..
Where did you get the T-Bone front bumper from
From their website thanks for checking out the vids 🙏🏾💯👍🏾
I got those same tires on my big rock but the tire is hitting with the turnukles
Hi thanks for checking out the vid Go on Amazon and get some hex exstenders you need to offset the wheels I had the same problem cause when I purchased the wheels I purchased with no offset Amazon and you will good.💯👍🏾
Yeah i got the 12mm i change the 14mm
But i notice you didnt had to change the hex on yours you left the 14mm
@@edgardoberberena797 yes I did change but can’t remember if I changed to 14mm or 12mm but yes I had to change cause they were rubbing also thanks
@@edgardoberberena797 ok awesome glad it worked out for you awsome truck👍🏾
Hi have u got the link for the shock tyre brace front and back and the rear spoiler please ?
Thanks for the comment the Shock mounts are from GPM Racing and the rear spoiler is from the Arrma Kraton 4s just purchase all wing parts for that car on Horizon Hobby hope that helps thanks for checking out the channel...
@@rcsfinest1883 have u got a link for the gpm shock mounts ?
@@steveo2009100 Yes just look up GPM Racing check under big rock and pick your color thanks for the comment.
@@rcsfinest1883 that’s great also we’re did u get that red brace from that runs all way down centre of car?
@@steveo2009100 you can find that at Horizon Hobby under Arrma Kraton 4s thanks.
New sub, also with a Big Rock and also with a rear wing (not yet fitted). Great to discover the channel. Servo failed recently so upgraded that under warranty to a faster 30kg Etronix.
Yes thanks for the sub awesome truck you will like it it’s a little ripper😃👍🏾
I just got one I haven’t gotten my batteries or charger yet can you point me in the right direction?
I use a dual charger cause I normally run 6s just depends on the use single battery or dual battery check horizon hobby or your local hobby shop thanks for the sub and comment 🙏🏾💯👍🏾
Do the bigger tires stress the motor out and cause it to over it hear?
I use a fan on all my cars and trucks depending on the gearing that’s what heats up the electronics 🔥💯👍🏾
Actually looks good with the wing!
Thank you came out really nice try to give a little different look 👀 thanks for stopping in..
you did a good job truck looks good
Thanks really appreciate you have a good day and thanks for stopping in
How did the wheels hold up I keep hearing people saying they snapped there hubs on the Six-packs ?
So far so good I don’t bash my rigs off of 3 story buildings lol like some people do so for me they been Awsome thanks for checking out the vids 💯👍🏾
@@rcsfinest1883 I’ll probably mostly run on road no hard bashing thx a lot 😎💯
@@burn1gotbeats yes that’s all I do street bashing and open park field running so you will be fine💯👍🏾
@@burn1gotbeats Forgot to tell you if you haven’t bought these wheels yet make sure you purchase the ones with a half inch offset or else it will hit the hubs I learned that the hard way.
@@rcsfinest1883 thx a lot bro appreciate that🙏😇😎
Agree on not going with 17mm. Just another $30 that you do t need to spend. Nice truck. I like mine just getting it going. My first ESC was garbage. They just sent another. Horizon was really quick about it. Hats off to them for sure.
Yes thanks for the comment I’ve had nothing but great customer service from horizon yes I really like the truck very fun hit that sub for more vids God Bless...
I just found your channel and I like your content. Where can a get one of those center braces that you put on the big rock. Is it off another arrma model? Then do I need the mounts also? Thanks for the help. Stay safe and God Bless you and your family.
Wow thanks for checking out the channel I really appreciate you all the parts are from the Arrma Kraton 4s find on eBay or horizon hobby maybe on Amazon not sure any other help u need don’t be shy reach out I’ll help you out and God Bless u and the family as well 🙏🏾💯👍🏾
I ordered the GPM Turnbuckles and they are way to short. I had to adjust them past what will NOT BREAK OFF, just to make them fit.
What ones you order the ones I order was for the Arrma Typhon adjusted a little but not to the point they will break off thanks
@@rcsfinest1883 Supposed to have been for the Big Rock/Granite. And they are nice. I have the K6 and I love GPM I have for it.
@@rcpd3157 Ok the ones I had was from Typhon build I did a couple of years ago that’s kinda odd that they say for granite/big rock and don’t fit ok so if you have any longer rod end I would just use those I had that problem on another build I did and it worked well hope that helps...
Is that the Kraton spoiler?
Yes this is the kraton spoiler thanks for checking out the video 💯👍🏾
@rcsfinest1883 You just bolt it on, and other parts needed or modifications?
Nice build! Do you have the Duratrax PN for the wheels and tires? I searched the keywords you used and got a LOT of different results. Would help. Thanks!
Thanks for the comment the wheels are Duratrax DTXC5520 Six Pack MT 2.8 2WD Mounted 1/2 inch Offset 12mm hex make sure you get the ones with an offset or they will rub the hubs thanks for checking out the vids 🙏🏾💯👍🏾
@@rcsfinest1883 TYSM. God bless.
My god is this guy hilarious lol
I had one of the T-Bone racing skid plates but it warped in just a few days. Loving the links, shock towers and center brace! Riding real clean!
Yes thank you for the comment I put one on my arm Krato 4s and so far it’s doing pretty good and I also put one on my arm a typhon build I did that’s doing pretty good so I decided to use it on this one too yeah came out nice God bless and have a good day .
Your big rock looks good tires Set It Off👍
Yes thanks for stopping in yes i wanted something a little different came out nice..
@@rcsfinest1883 nice video bro, r the wheels heavier than the original wheels? Where you get um ? Like those good 👍
Links for parts would be nice in description 👍
Sure what parts exactly you looking for thanks..
@@rcsfinest1883 top brace and is it a straight fit job?
@@markwatson9413 Top brace is from the armor Kraton 4s Direct fit just add your screws nuts and bolts thanks
@@rcsfinest1883 thank you very much sir 👍
@@user-in4xs2fv8j Thanks for the comment These are the DuraTrax DTC5520 six pack MT 2.8 with a half inch offset 12 mm hex. Make sure you get them with the offset or else they’re gonna rub the hubs.Thanks
I love my bigrock I think I'm going to need to get typhon 3s mainly bc it 1/8 scale crazy the 3s is same size as 6s one
The Typhon is a great buggy I love it check out the build I did thanks and sub for more vids thanks..
Awesome video amazing content great job thumbs up 👍
Thanks you sir good to hear from you I Pray you and the family are well thanks for the support God Bless💯👍🏾
Looks like the 1/8th scale version.
Thanks it’s an awesome truck with a few updates 🔥💯👍🏾 Thanks for checking out the vids 🙏🏾
have u got the part number for the front bumper please
I don’t rite now if u go under tbone racing and look under the 3s line u will find it if it’s instock always out...
Nice wheels 🛞
Thanks yeah they are pretty good for bashing thanks for checking out the videos and checking out the channel. Appreciate you. Have a good day.
Were do you buy that rear wing
Go to horizon hobby and look up Arrma Kraton 4s and order the wing and the wing support 💯👍🏾thanks for checking out the vids 🙏🏾👍🏾
Did u have to cut the body to fit the wing and wing mount?
No this is a direct fit bolts right up thanks for checking out the vids 💯👍🏾
Excellent and speedy reply! Subbing for sure! 💯
@@rcsfinest1883 Can you inform me of the model numbers for the direct fit wing and wing mount you used? I don’t want to have to cut the body like others have did in their videos.
@@saltylocal6917 No problem bud the mount is ARAc9602 / and wing is ARAc9616 can get off ebay horizon or local hobby shop thanks for checking in...
@@rcsfinest1883 are you sure this doesn’t require the body to be cut? I looked up the part numbers and, although different part numbers, they look identical to the mounts that others use and that require the body to be cut. Thanks.
Nice...🔥👍
Thanks came out really nice 👍🏾
Good video👌🏼
Thanks for checking out the vids 💯👍🏾
Very nice looking Big Rock.
Thanks for stopping in good to hear from you Pray you all are Blessed and doing well.
@@rcsfinest1883 We are blessed. We have what we need and plenty of love.
Are the wheels to heavy at all? Did you change the gearing?
No perfect set up u will need hex ex’s tenders these wheels have no offset so make sure u get them with an offset all stock no gear change just went bigger pinion thanks for stopping by God Bless...
Does that chassis brace actually really help a lot to prevent damage or is it more for looks? Ive bent a motor mount on my big rock after a month of owning it and it makes me wonder if something like a chassis brace would have helped prevent that. I definitely want those adjustable shock tower braces too, those are rad. Also what benefit is there to switching from the stock metal turnbuckle arms to aluminum? I want to pit aluminum pivot balls on mine but the stock turnbuckle arms seem decently tough.
The chassis brace definitely helps with a plastic chassis and all the other plastic parts to reduce a little flex as far as the turn buckles it’s a nice option to reduce the flex and be a little stronger I’m not a big basher so I’ll leave the testing to those who bash hard😄👍🏾.
Get the motor support. About £5 on eBay. It sits on back of motor.
What rims are this? Do they have positive offset that hubs hide inside?
They are the duratrax ct six pack they had no offset so I used wheel Extensions for a little wider stance so the hubs wouldn’t rub the wheels👍🏾
How wide adapters?
@@przemyslawnowakowski9863 I think they were 15mm or 25mm I would need to check tonight when I get off work👍🏾
@@przemyslawnowakowski9863 12mm to 20mm Wheel Hex Hub Adapter Extension For 1/10 RC Crawler Scx10 D90 thats the ones on ebay little modifying to make fit tho drii the hole out a little bigger to go over axle thanks...:)
Do the tires ballon on the street? How do they run on the street?
Hi they are belted so no ballooning they are great a good option tire thanks for checking out the vids 💯👍🏾
Sorry I forgot to mention if you do get these wheels make sure u get them with an offset or you will need a spacer they have no offset thanks 👌🏾💯
@@rcsfinest1883 sorry I’m new to this. What do you mean offset? Thanks for the reply. 👊
@@niccomaniatty9421 The offset is the depth of the hex when you order it will tell the offset just make sure you order the one with the offset because if you don’t you’re gonna have to use a spacer like I did thanks
@@rcsfinest1883 ok thanks!
Hi I have got the same wheels as u and since fitting them I get a wobble front one of the front wheels have u noticed this with urs since fitting them? Is it normal untill the tyres bed in
no wobble on mine re check everything make sure wheels are seated correctly and tight thanks for the comment..
Hi mate I just received my wheels and tyres the same as u have in this video also I have the 12mm hex nuts and they don’t go all the way back on the shaft. They only go over half way on the shaft and stop and the shaft goes abit bigger can u help me here as I am stuck. What did u use on urs mate ?
Take a drill bit and open the hole a little so that it slides on💯👍🏾
@@rcsfinest1883 can u buy hex adapter instead of drilling the hole ?
@@steveo2009100 I’m sure you could that’s just what I did drill a little larger hole and done👍🏾
I"ve never seen such a great video in my life I wish you prosperity.!!!
형제 친하게 지내봅시다.
😎😎
Thank you for stopping in please subscribe for more vids and thanks for the kind words 💯👍🏾
It is worth discussing the topic here because I see that you take care of the models and improve them, most of them do not, only repair.The extreme bashing and smashing of these great models is an artificially created fashion that ruins the pockets of amateurs, especially young ones who have no idea to drive and dont understand the idea of it. THAT YOU WILL NOT BREAK EVERYTHING SO THE IS IN RC AIRPLANES AND FAST DRONES THAT AFTER ONE CRASH ARE A PIECE OF JUNK...Very nice improvements you,ve made - it would be nice to put the links with this extras ...Thanks
Yes well said my friend and thanks for checking out the vids 💯🙏🏾👍🏾
Nice truck man i have one i keep breaking a arms!! It says 199 subscribers so i hit that subscribe to make it 200!! Good video keep it up
Love the build man
I own the same car with a few mods I love it. Highly recommend a set of mt rockets for some mucking around the house or skatepark, wow I didn’t even know they made a 6s mate that’s the first I’ve heard of it love it hahahabi got some study to do
Watching from Australia 🇦🇺
Have you had any issues with the wheel coming off at random intervals Mate
Keep up the excitement, nothing wrong with getting side tracked lol 😂
Hit me back mate
No issues as of now trucks holding up really well I’m not a big basher open field and pavement running thanks for checking out the vids 🙏🏾💯👍🏾
Do you have a link for tires/rims? Thanks a lot great video 🔥💯
Just put in Duratrax Six Pack MT Belted 2.8 on eBay or Amazon or google and you will find them thanks
Is there a Offset on these tins & tires??
@@kevincarpette5009 no offset on these so when you purchase make sure the ones you get have an offset cause I had to use hex exstenders 😩💯👍🏾
@@rcsfinest1883 Thanks 👍🏾👍🏾👍🏾
Those tires belted ?
Yes belted tires thanks for the comment.
@@rcsfinest1883 nice build 💪🏾
First of all...Long time youtube viewer, first time visiting your page and instantly subscribed. (I see you fam😉) I got me a HG-P408 hummer as my first RC rig and my girl loved it so much she went out and got one of these bad boys. (I think she wanted to out do me on speed but she won't admit it😏. Even though mine is a crawler and this one is a basher...) However, Now we are about to be out there ripping it up together... even if she is about to be WAY faster than me Smdh.
We both are subs now to your channel learning about the RC world. So keep up the good work and keep showing us the hottest vids for our new favorite past time.
Me again... If I was to get another rig in the basher style what would you suggest that would run neck and neck with this one without me getting the exact same thing? I have a crawler already but if I wanna go basher what's my options out there for a good equal playing field? All advice is welcome. I gotta keep up with da misses. Lol
Thanks for the support sounds like you both have nice rigs it is definitely family fun me and my wife run also God Bless
@@brucewayne3157 I would look at the Kraton 4s or Traxxas maxx it really depending on your budget and if u want to run 4s or 3s a lot to choose from I hope I have been a little help thanks for stopping by the channel 💯👍🏾
Drop the links
All parts for wing are Kraton 4s wheels are the duratrax 6 pack belted with 1/2 offset 👍🏾💯thanks for checking out the vids.
Hi I cant find your Titan Build.
Are you referring to the Arrma Typhon 4s build????
Or the Arrma Typhon 3s 4s 5s 6s both are under my vid selection👍🏾💯
sniff , mmk
How about testing the mods? Do 200 ft jump some mountain and video tape it and show up if you're truck is still working....its too clean lol
Thanks for the comment😂😂
@@rcsfinest1883 nice truck it’s sold out everywhere lol I got Maverick Quantum instead at RC Planet!
@@Callmebutturblk ok that’s great I hope you like it...