I watched the video. I bought the part. I didn’t have the right tool to remove the fan so instead I removed the air cleaner assembly and that gave me the room i needed to remove the radiator. Thanks for the video.
What's a guestimate for how look it took you to replace the radiator? Bringing min into the dealer and I just wanna get a baseline so they don't try to rip me off. TIA.
Very helpful video. But... A) My trans cooler lines are 1/2 inch not 3/8 like the tool says. Took a minute to figure that one out. B) My A/C line runs along the top of the radiator, then makes a u-turn beside the ABS unit/lines (less room). I finally had to knock the radiator side mounts off to get it out. Reassembly was equally circuitous.
thought the oil cooler lines were for transmission and not engine oil? why is he checking engine oil? that is the transmission oil cooler lines correct cause sounds like he's making it seem like engine oil cooler lines!
From 3:10 - 3:20 you see the mechanic loosen some lines going into the transmission. Does anyone know what they are called? They are leaking and I need to replace them.
I think some of the excavations were too vague. For Instance, where is the vacuum applied? The two screws you took out with a magnet, when did those get put back? And more.
I really don’t understand why mechanics in these videos wear nitrile gloves. That would drive me crazy and they will get torn on things left and right.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I watched the video. I bought the part. I didn’t have the right tool to remove the fan so instead I removed the air cleaner assembly and that gave me the room i needed to remove the radiator. Thanks for the video.
What's a guestimate for how look it took you to replace the radiator? Bringing min into the dealer and I just wanna get a baseline so they don't try to rip me off. TIA.
Well Done... Completed the removal & installation in an afternoon, Ops Check passed - no leaks, drips or stains.
Where did you get the tool to remove the Trans lines. I bought 3 different sets of trans/fuel line disconnects and nothing worked
Very helpful video. But... A) My trans cooler lines are 1/2 inch not 3/8 like the tool says. Took a minute to figure that one out.
B) My A/C line runs along the top of the radiator, then makes a u-turn beside the ABS unit/lines (less room). I finally had to knock the radiator side mounts off to get it out. Reassembly was equally circuitous.
Best step by step presentation of them all ! Thanks.
thought the oil cooler lines were for transmission and not engine oil? why is he checking engine oil? that is the transmission oil cooler lines correct cause sounds like he's making it seem like engine oil cooler lines!
Great video where you buy your tool to move the transmission line brand . Please info am about to do job in my explorer 😊.
4:06 What is this tool called?
Where do I get that tool
Does all of that have to be removed? I swear i seen other videos where they didn't remove near as much.
From 3:10 - 3:20 you see the mechanic loosen some lines going into the transmission. Does anyone know what they are called? They are leaking and I need to replace them.
Great vid! Thank you for producing!
How important is it that i vacuum out air
I think some of the excavations were too vague. For Instance, where is the vacuum applied? The two screws you took out with a magnet, when did those get put back? And more.
Wait so he doesn’t top up the trans fluid?
You will get tired of replacing the garbage plastic radiators.
Yeah sure transmission lines just pop right out
Fantastic!
I hate owning a ford
I really don’t understand why mechanics in these videos wear nitrile gloves. That would drive me crazy and they will get torn on things left and right.
Very good
Wow..alot..
Yea not 5 w30!!!!!!!