ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Yamaha VPE: New 8K AVENTAGE AV Receivers for 2021
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- Audioholics is proud to host a Virtual Press Event (VPE) for Yamaha this Thursday at 8pm EST to discuss their new exciting AVENTAGE AV Receiver lineup for 2021. These new models offer full HDMI 2.1 support, have updates to YPAO and have meatier amplifier sections. We will dive deep into the design and upgrades these receivers offer with Phil Shea from Yamaha. Get ready to have all of your questions answered about these new products and enjoy a close up look at them with our coverage.
For more info on new 2021 Yamaha AVENTAGE AV Receivers: bit.ly/3urZc9z
See a demo of the new 2021 Yamaha AVENTAGE AV Receivers in action: yamaha.io/37UNBXA
Audioholics Recommendations Amazon Shop: www.amazon.com...
Audioholics Recommended Cables:
250ft CL2 12AWG Speaker Cable: amzn.to/2vwS9QH
Locking Banana Plugs: amzn.to/2ZQt15x
9ft 4K HDR HDMI Cables: amzn.to/2WiIXeD
Audioholics Recommended Subwoofers:
SVS SB-1000 Pro: bit.ly/3c0rwsf
SVS PB-1000 Pro: bit.ly/3aWzdAg
Audioholics Recommended Electronics:
Denon AVR-X3700H 9.2CH AV Receiver: amzn.to/31UOD3Q
Yamaha RX-A3080 9.2CH AV Receiver: amzn.to/2VzA03v
Denon AVR-X6700H 11.2CH AV Receiver: amzn.to/38zHjMr
Audioholics Recommended Speakers:
SVS Prime 5.1 Speaker / Sub System: amzn.to/2GWoFCn
Klipsch RP-8000F Tower Speakers: amzn.to/2Vd8QQn
Pioneer SP-FS52 Speakers: amzn.to/2n7SyIJ
Sony SSCS5 Speakers: amzn.to/2ndEn56
#receivers #hdmi2.1 #hometheater
00:00 Intro
06:35 Yamaha Presentation
25:10 Ecore vs Torodial
01:06:00 Web Editor
01:09:50 RX-A8A Inside View
I had friends who swore by Yamaha receivers and amps back around 1975, when I had begun building my first Marantz/Pioneer system. I had to admit that their Yamaha gear was dang good. Years later, when I started to revisit the audio gear world and began looking at AVR's, I walked into a Magnolia store on a very slow day, and spent about an hour with the new Yamaha Aventage models. The RX-A2050 was nearest my budget range, and sounded incredible with every speaker, but especially the B & W's. Today, with this great video, I am again intrigued by the new Aventage gear. Very impressive, and I have no doubt that they are the best Yamaha AVR's, yet. Thank you very much for this deep dive into these new Yamaha beasts!
Brought my new A6A December 2022 .
Have the new updates installed.while my family is Denon and Marantz gear heads I step up to the Top teardrop flag ship with all KEF speakers.
Thank You Yamaha for putting me out front with this beautiful masterpiece.
Always great to see Phil Shea, he knows his stuff.
He's one of the good ones.
Gotta say it must be amazing working for Yamaha. No company is perfect and there will always be seperate views on products, internally all companies have disagreement, but to be involved with a company that so often make brilliant and exquisite products must be inspiring
Yes Sir they are reliable, I have had my RX-Z11 as my daily driver since 2009! Never have I had a problem with it!
I have the Z11. Picked it up for 80 dollars Australian not working and fixed it for 800. Problem was with the power supply and a component video board. Been using it for 18 months now with no problems and I give it plenty of ventilation. It drives my Magnepan LRS easily and sounds pretty damn good for a surround amp. I rarely watch 4k and Netflix and Disney etc that I watch is mostly Dolby digital plus so I won't be upgrading any time soon.
I too have an RX-Z11, and thinking of getting the AV 8 as logical upgrade. What is your opinion?
Awesome! I`m Yamaha fan - 2x3080 + 2 older AVRs at home (one has 20 years+ and still rocking). I would really like to see new separate processor from Yamaha on the level of Storm/Trinnov. I think they can do it and make it much cheaper than those companies. Patiently waiting :)
Thanks for the amazing Virtual Press Event Gene always good stuff… Can’t wait Yamaha ❤️
The Yamaha logo is a circle with three crossed tuning forks.
The tuning forks represent the company's three pillars: technology, production, and sales. The circle symbolizes the company's reputation for sound and music.
The configuration of the tuning forks also resembles the wheel of a motorcycle.
I just bought the RX-A6A. I can just tell from this interview it could take me at least 6 months to know maybe 70% of what this AVR can do. it just got here 3 days ago I have just opened the box. I won't rush to install it just yet. renovation first.
Thank you, Gene and Phil. awesome interview a year late. I waited because I thought the price would come down. it didn't.
newer does not mean better. I think this receiver would compete against any flagship receiver.
What manufacturers should do, is the assign bi-amping to other channels beyond the front speakers for people that don't have more than a 5.1 speaker setup.
I've owned 3 avrs from Yamaha in 18yrs. All great avrs, they are forward side of neutral with high effiency speakers.
Picking up an A2A soon.. Going from Integra to Yamaha.. We'll see/hear how this goes.
This is why I only trust what Gene does. Most of the technical stuff I cant understand, but daaaaamn this dude is such a beast, so honest and transparent. Thanks again Gene.
I had a question about about the 4K/120hz update that was promised in February 2022… it’s March now and there hasn’t been an update… do you or anyone else on this feed know when Yamaha is going to actually going to release the update?
3 months going back n forth in my head what receiver and brand too buy too replace my 2004 SR4400, watched this video right through, and I’m sold on this range, even the A2 will easily replace my old donk, literally was meant too watch this video for sure.. cheers Phil and Gene.✌️🇦🇺
I really enjoyed that. Thank you.
I have the 3070 and quite pleased. When I first got it worked for 2 days and then the power would not come on. They fixed it and I had it since. This is my 5th Yamaha receiver since I bought my first one in 1980. The 3070 is not as detailed as my 775 on music but has more power. I love it but is not going to up date this one since I only had it working for 8 months( I got it for a bargain 2 years ago and put it in storage until last april) I might up date in 2 years and thinking about adding the 5200
Awesome interview! Really cool to see, at a high level, the engineering that goes into this gear!
Good stuff..kinda amazing just in a year the prices increased up to 22% (for the lowest model) from his prices here....inflation!
I’m probably jaded now but am always leery when I hear things like “future proof”. My Onkyo TX-NR929 was sold “with 4k pass thru” so I thought I was covered when I upgraded to a 4k Blu-ray player. But it would only pass 1080p. After wasting hours going thru settings and changing everything possible on the player and the receiver, I figured it out. HDCP 2.2 was the problem. The copy protection sold as a “feature” was preventing me from playing discs I personally purchased on a receiver and blu ray player own legally own. That stung a bit. No way they could have anticipated it at the time the Onkyo was made, but it is just as obsolete as it would have been without that “feature” I was actually trying to use.
This is a very informative video!!! I have an older Yamaha receiver and am looking forward to getting one of the new Aventage receivers, most likely the RX-A4A or 6A. Yamaha seems to be cutting-edge with av receiver technology, design and engineering. I haven't listened to any of the Aventage receivers, but I'm pretty much sold on the technology, features, and build quality. Very impressive!
Too bad i missed this live. Thumbs up. Im loving vintage gear lately. Yamaha in on my radar. They made some capable and gorgeous gear during the receiver wars and beyond. Interested to hear about new gear too. Cheers folks
I bought an A8A for myself for Christmas. It's replacing an Onkyo TX-NR1010. I can't wait to connect everything and tune it. I'm also replacing my speakers with a 7.1.4 Atmos setup. The L&R channels will be Heco Aurora 1000s, the center will be a Heco Celan Revolution 4 and the surround channels Heco Aurora 300s. The 4 Atmos channels are Klipsch 5800CDTII ceiling speakers.
The sub is a PSA TV2112M. Although it hasn't come in yet. It's going to be exiting. Just hope the YPAO doesn't let me down.
Any update? Did you like it?
@@shinvergil I do like it. I'm keeping it. I love the Aurora 3D too.
Awesome video. HDMI board failures pushed me to Pre Pro set up. MX5000 runs so cool after an hour of spirited listening, it's hardly gotten warm. I love it. Awesome listening to the SMEs here. SLDV is all worth every penny of its $0.5M cost. Changed SMC bulk caps design and location on diesel turbo actuators on the PCB. I agree, $3k spent on a Yamaha is nothing compared to the awesomeness you get. I missed initially Audessey XT32 when switched from Onkyo. But not anymore, I go between manual and YPAO flat depending on the soundtrack. I love the Yamaha products so much and this presentation just consolidated that love ❤️!
Future proofed for new features with that FPGA QCOM chip. Great!
I don't know how he can speak with so much confidence. I've been looking at a load of Yamaha cinema amplifiers and it's a world of pain. If they are working there is too much compression so must find out how to turn it off, not obvious. Then things break. Voltage rectifiers, HDMI chips, DAC chips. Sound can be strange, lack of bass, tone controls not working correctly, tone control or DSP chip not functioning correctly. they could have been good if they were made bomb proof but they keep breaking and can be difficult to make sound good. I expect over bright sound from many yamaha products but i hope these newer models are more reliable.
Wish I knew 1/2 of the technical details they were talking about but it sounds like a very impressive product. I have 2011 Onkyo txnr-3080 and I think it is time for an upgrade.
Rx-A6A pre-order done! ;) Now just need to be patient . Probably it going to take a while! 🤷♂️
Thanks to this video, and after a bitter experience with Denon and Marantz receivers, a Yamaha A6A is on my shopping list,
Why bitter?
@@shinvergil because their firmware is flaky as hell
Gene, I have been surfing your channel for a while. I just want to thank you for all the great info, and especially seeing your passion to this wonderful hobby! By the way, I am going back and fourth between the Yamaha A8A , and the Marantz Cinema 40. I would love your opinion on this. I have the Def Tech 9080 series for a 7.4 system. Would appreciate your opinion….. Thankyou.
Both great choices. It comes down to which room correction you prefer. Marantz has the edge there w Audyssey and Dirac. Yamaha gas the edge in amplifier power and manual PEQ.
@@Audioholics Thankyou. I didn’t mention this in my post- I will be using separate Amps to run everything. So, in actuality the receiver will become a pre pro.
Great video.
I am saving up for the A8A.
I really love the ability to tweak low frequency...and a friend of mine had the V6A, and I was really suprised by the soundquality in that (and decided that an Aventate would be my next AVR right there 🤪).
Did you ever get it? If so what do you think about it?
@@LichaelMewis
I ended up with a Denon X3700H insted. Don't need the extra power (have 4 externaly amped channels😊), and concluded it was not worth rhe extra money, more than twice the Denon🙊
Yamaha time to step up and take on the Big boys with a new line above the Aventage , Hi end line in a Pre pro wouldn't that be something.
This thing is pretty much a pre/pro, IF you want to turn on pure direct mode, it has 13 pre outs with balanced outputs AND intputs for L/R. Turns off video section and every other digital channel processing module; to go full analog… Then again I do agree, I think they would make wonderful high end pre-pros if they have the R&D capacity. But at this price, this thing is ALMOST a pre/pro and a dedicated 11 channel amp in a box. They could make a RX-A10 with two power supplies and two power inputs in a box, that would be epic 😂 I still have an old Yamaha amp that has separate power supplies for the left and right channels. It’s pretty impressive
Talk/list Sinads plz! In the past Yamahas DAC sections have performed poorly there, hopefully it's not the same reason why they skipped over talking about it....
Wow this beast looks amazing. Can’t wait for pre amp measurements and bench test
Hi guys. I came here because I’m having issues with my nvidia shield pro tv streaming box and my Yamaha aventage. Plugging straight into the receiver I always get a black screen with Dolby vision content unless I switch inputs and switch back. It’s very annoying. All issues are fixed when I use eARC though. Has anyone fixed this issue?
I bought a new Yamaha 3080 for 1400.00 the main lcd screen went out a few months later and come to find out it was a B stock unit and had no warranty . Just using the OSD for now .
My last Yamaha a2000 lasted 8 year now problem until the power supply board psb went out .
Over all I still a big fan .
It's hard to believe that you can no longer buy an AVR for under $1000 that has line level outputs for at least 5 channels. And speaking of Yamaha, why don't they offer a Multicast receiver that has only 3 channels of internal amplification, since the surround channel speakers will have their own amplification?
I remember when the RX-V1 dropped...great press event
I refuse to ever buy a product based on "future firmware update" promises. I've been burned by too many companies' false promises before. Sell them when your HDMI 2.1 features and Auro 3D are actually working. We've seen what happened last year when HDMI 2.1 is not tested beforehand.
They’re using a programmable FPGA so they can effectively “upload” a brand new chip design whenever it’s needed. It’s explained in the video. This is actually forward thinking because why release a whole new range of amps every year with a brand new hardwired HDMI chipset, especially when the actual amplifiers don’t need upgrading at all. It’s madness. FPGAs are the future for creating an actual future proof high end receiver and not bodge an update like what Denon and Marantz have done by releasing an extra box to cheat the HDMI bug.
Yamaha is getting my money.
@@kashyusaf9260 I get that but Samsung's One Connect box was supposed to be the same thing for TVs and look how that turned out. 🙄 I'll no longer buy products on firmware update promises. I'll buy it once it's present. As far as I know, Sony still doesn't have ALLM and VRR working in their newest TVs. Working firmware update has not come. Lots of broken promises on firmware updates, not just in the receiver space. There's a long list.
@@kashyusaf9260 I for will buy this based on their current FPGA architecture. It truly is forward thinking. Btw did the price shoot up $300 since this video was made. Inflation is maddening.
Beyond the fact that they're using programmable FPGA allowing them to completely rework this thing going forward, I would add a couple thoughts. I GET your point about being burned before by other companies (like Sony & Samsung to name just a few) not delivering on their firmware promises. That said, this is YAMAHA. They have a philosophy of caring for their customers. I own an older RX-A2030, and FOUR YEARS after they released it they offered a FREE firmware update that added Dolby ATMOS to a receiver that was NEVER setup or advertised to have it (ATMOS was just beginning when it was made)! They did NOT have to do that. Most companies don't update past the second year never mind totally renewing a 4 year old product! If they say they'll deliver it they will. BTW - at the time of this writing the units are shipping with the promised update. These guys deliver on their promises and beyond.
@@mickmouse2258 how's that working out for ya? I saw recently they JUST got some HDMI 2.1 features last month and are STILL waiting for others. 😆 Also, the previous model year Yamaha owners all got screwed so I wouldn't say they always deliver.
A bit disappointed with the amount of plastic being used on the top model A8A.
Namely the front facia and the top cover (that I wasn't aware of)
Behind the front plastic face plate is steel. The top plate is thick still with big venting. The plastic is cosmetic. These are the best built receivers since the Z11.
Still £3000 for an amp that looks like a £300 amp. I have ‘bought Yamaha amps for years and still own a dsp a2 from 30 years ago as I could not let it go. I have had other Yamaha amps and all had a nice brushed metal finish and I am not impressed by this plastic cheap look at all. I don’t mind the design but the all plastic is making me think twice. They might be the best built but they do look cheap as hell big mistake on Yamaha’s part as this looks to me to be a money saving idea.
I agree, that plastic look is a big turn off and a deal breaker for me, not having a front hdmi input puts the nail in the coffin. Yamaha went cheap with this design and it looks cheap. No excuse for the amount they are charging. I own the RX-Z11 and that is an awesome receiver but the RX-A8A is no replacement.
@@chriswyatt9868 the RX-8A has a superior DAC, HDMI, and CODES. Only loss is 20wpc but that's was preouts are for. Hanging on to a Z11 for nostalgic reason is a poor excuse not to modernize. You're missing out.
@@Audioholics I'm not missing out. I had the CX-A5100 and MX-A5000 and now have a Marantz AV8805 and SR8012 in my two rooms. The Z11 is sitting in its box for now. Was hoping I'd like the A8 but so far not to impressed, maybe it will grow on me if i seen it in person. It's just not a Z11 replacement.
This channel is the best. Pre bought my a6a 2 months ago, anxiously waiting delivery. Your content always seems to hit the mark. Looking forward to whats next
I'm going to put an order in next week, although I probably won't get mine till October/November according to the store's salesmen.
Sounds yamaha avr better than marantz or denon?
🤩 THANKS GENE …WE FOUND THIS WAS VERY GOOD AND TIME WELL SPENT 🤗
ALWAYS GOOD TO KNOW WHAT IS AHEAD 🧐
Just got the 3080 this year and we are always behind the curve 😉 because of the budget 😊 …. But THANKFUL 🤗🤗🤗
And we wonder what we are missing 🧐 BUT WONDERING HOW MUCH BETTER CAN IT BE 🧐😍😍😍 AND THANKS TO PHIL WHEN YOU SEE HIM 👍
I got a 2080 aventage powering
2 JBL studio 290
2 JBL studio 570
1 jbl 520c
And 2 self powered 550p
Talk about home theater on a budget. Only cost me 3600$ for everything including the receiver.
I just installed a A2A Aventage in my home theater system after my RXV-681 got hit with a voltage spike.... I'm not impressed at all with it. The center "foot" holds either a front or rear foot off the table (glass top )and it teeters.... really not impressed
To me what needs serious improvement is YPAO. I have an A3050 and through the years and subsequent updates still I can't use the calibration it provides, I got to go manual, painstakingly manual. Maybe this new LF mode will help somewhat, but, it would be very good if we could set the speakers crossover beforehand. Setting the crossovers afterwards mess with the whole calibration. Also this 3D thing never worked in my room, if I don't go manual I loose stage, I loose depth, I loose dynamics (in low, mid-low frequencies).
Why all that money and teenie tiny displays? I prefer the larger tablet style displays of the newer NAD's and other higher end AVR's.
One reason seems to be front faceplate rigidity. This could be solved by making the faceplate solid then mounting a larger outboard display on the exterior of the faceplate.
because, with the app controls, the display is honestly not that important.
anyway, we want to watch the tv, not the display.
@@a9fc
Ahhhhh. So that's why the NAD's, Rotels and other high end AVR's and processors have the nice large color displays and the yamaha doesn't. Even the Denons and Onkyo etc have large INFORMATIVE displays. Hmmm..ok. 😂
@@jimbanville and that's why they don't sound as natural =)
There's a reason why audiophiles prefer separate components. To reduce interference.
An AVR already has so much electronics inside. I'm glad they chose to use a smaller screen which will draw less power and produce less interference.
And anyway, in a home theatre system, I want to watch the TV/Projector screen, not the AVR. I only need the AVR to give me some information for reference occasionally. Not like I'm going to stare at an album cover while watching a movie lol 😂
@@a9fc
Lol. There's no interference from the large color displays on the NAD, rotel, etc etc AVR's. They're also not separate components. They're fully intergrated AVR's.
It's not difficult with MODERN ELECTRONICS to have pure sound AND convenience features like large informative displays. This isn't the 80's or 90's.
Does the hi res audio coming out of flagship cell phone get interference when the screen is on? Lol. No.
Why is it only these new yamaha AVR's have these tiny displays? They're used to be on par with the larger, informative displays on the denons, onkyo, etc etc.
Yamaha is going backwards.
Of course no one stares at the AVR's front panel. But it is nice to be able to look at the front panel and EASILY see what source is playing and at what resolution, the type of decoding, etc etc etc ...without pulling out your phone and without pressing buttons and scrolling scrolling scrolling on a tiny single color display with your magnifying glass in hand 😂😂😂
Not everyone has their tv on when listening to music through their avr/audio system.
Using your logic, why put any display or buttons or knobs on the avr at all. Just use your phone for everything. AVR's should just be a plain black box tucked away somewhere. You'd be happy that they're "saving money" but charging you the same price because they claim it's "better" 😂👍🏼👍🏼
Can’t wait have mine on order get them here please
Hi Gene. great video again. Do you know if there is a new Processor from yamaha on the way ?
Isn't the CXA-5200 it?
Wow!! Yamaha doing that thing. I have a TSR 700 and love it, looks like Yamaha has put together something really nice here!! Sound United better be watching too, this could be great for the average consumer like myself
Another year has gone, and no sign for DSD streaming at 512, no sign for implementation of top-of-the-range DAC from Sabre or AKM... Also, the design... Overall it looks ok, but also it looks like a lot of corners have been cut, in order to reduce costs - on the display quality side, for example, it's very obvious. I cannot forget how bright and clear and long-lasting were the displays from Akai (and other companies) back in the '80. Most of them look the same, even after 30 years. ...and why do you still refuse to implement HDCD decoding? For a few dollars that you have to pay to Microsoft, for licensing?? Many of us, audiophiles, have in our collections CD's HDCD recorded that we would love to play from time to time... We would like very much to have also this decoder incorporated in a high-quality receiver or A/V processor. And also, on all connectors - gold or silver-plated copper RCA and binding posts - not the inferior brass!! At least, on the top of the range receivers and A/V processors. Hope that the right peoples (deciding factors) on Yamaha, are seeing this.
I bought an Aventage and it sounds great for 2 channel music, but can NOT compete with my Sony STR DN1080 for movie sound. It sounds thin and not life like on movies. I do not understand why.
Excellent, timely content!!!!!
This is a shame... i currently have the aventage 2080 with 2 external amps to run a 7.2.4 Bi-amp system... and this new flagship does NOT allow a 7.2.4 Bi-amp configuration in any which way.. i called Yamaha and spoke to their tech support to confirm this.. but it allows a 7.2.2 bi-amp with an extra zone.. why couldnt they also give the option of a 7.2.4 bi-amp instead of the extra zone like they did with the previous flagships... really a shame.. now i have to switch to Denon after being a long time Yamaha guy... this is just mind boggling
Gene, love your show with your informative and engaging format. I am hoping you can help me with a Yamaha receiver Challenge with no bad endings. About 14 months ago I needed a receiver and bought the Advantage RX-A1080 and it seems to work great. I wanted the 2080 or the new line but none would be available for a long time. The owner of the store told me when the new stuff comes out he would give me my money back towards a receiver of the new line which if the offer is still good the RX-A6A would be my choice. I recently got some Cornwall 4's that I love for their live front row sound, that my RX-A1080 seems to power just fine, and it seems to do what I want it to do. What my question is would up grading to the A6Amake any audible difference or would it be just upgrading to the newest series. Thanks TR.
I saw that aventage series needs to be sent to them so as to add 8k/60 and 4k/120 earlier promised to be as firmware update. Is it true ?
No, the receiver downloads and installs updates over the internet directly. And at this time the update is out.
The lack of care for the A2A is disappointing. It’s missing a vast array of features.
So technically I can't buy a Yamaha Rx4a because I have the new Polk r 200s because it's technically a 6ohm receiver and if I had a issue while using those speakers will the deny any malfunction warranty claims ? If any
No.
My big question is availability? I want 2.1 supported receivers and am looking to a new one, I had Yamaha for a few years ago a "Aventage" which I loved, currently using a Denon 3500, not bad but the Aventage were built like Tanks! Hopefully I can find one!
Tell me, what are the output transistors in the Yamaha V6A? Such as Std05p Std05n? Are there amplifiers with a high signal rise rate too?
Toroidal transformers are more expensive than E-Cores and That’s the real reason to replace. Save money and make profits
I forgot to ask if the new Yamaha rx-a8a has HDMI diagnostic tool built into the receiver like the Denon and Marantz?
Any time stamps around gaming features?
I’m very curious about VRR and if they implemented FreeSync support.
@Wayfaerer thank you but that doesn’t answer the question.
I am curious as to why they didn’t just support the full fat 48Gbps of 2.1.
But Im chasing info about FreeSync. Not just forum VRR.
Is the Adventage line going to excell particularly in its music functionality compared to other manufacturers AVRs?
Is there anything in particular in these new Yamaha receivers that stands out or makes them preferable over something else comparable from say, Denon or Anthem? Thanks Gene. You always have the most thorough reviews on the most interesting gear.
They're better than Denon for sure but can't touch Anthem, especially when it comes to room correction.
These have 40 gb hdmi 2.1 that's what's up.
Hi sir i have a yamaha receiver during the test tone and ypao calibration the subwoofer working but when i play music it's not working only buzzing sound it same like grounded what could be the problem
Just got to the 5200 question. A bit disappointed that there is no date in sight for an update.
What's the time stamp for the 5200 update
Is it possible to buy Dirac Live and just put the measurements into the receiver?
I wanna see measurements review in the future please!
Auro 3D is here… bout time haha
when is the ETA of RX-A6A?
WTF. No front HDMI. Who the hell wants to unnecessarily wrestle with 50 lbs or so of receiver sitting in the cabinet just to quickly plug in something for a quick/temporary test ? No Yamaha for me.
Will the use of cooling fans on top void the warranty or adversely affect the unit?
A late response, but absolutely no warranty issues with doing external cooling. I'm an AV Tech for >40 years, and I run external cooling on all my DVR's (easiest is just a laptop cooler, but you MUST keep up with cleaning on any "add on" cooling setup). That said, one of the main points made repeatedly in this video is that the Yamahas run much cooler than most other AVRs. These guys are the tops in engineering the small things like cooling that others put in the back seat. MOST setups don't require cooling unless you're driving a HUGE room at top levels and there's restricted airflow to the receiver (like in a closet or buried on a shelf). You should NOT place anything on top of it. A normal home theater setup doesn't need any add on cooling.
I have M&K 150s so all 5 speakers are 4 ohm. Will an aventage AVR handle that or will I avoid the warranty trying to run 5 4 ohm speakers.
Hi iwont to buy a av receiver very soon , i wont to make a choice between this 2 , the Denon x8500HA and Yamaha a8a , please i need some advice , the denon has 13.2 chanells and only 1 hdni 2.1 connector , the yamha a8a has 11.1 chanells and 7 hdmi 2.1 connectors , what is best sound quality between this 2 , and durabilty please i need advice thank you for time !
Gene ... Are the xlr inputs & outputs on the A8A fully balanced from input to output please ... Thanks and Kind Regards ... 😎
Does the RMS have to match in all speakers or just the front stage when setting up a home theater system?.. thanks
Looks like someone bent that wifi antenna connector…
Can I use this with a 1080 panel ? Or would I have to buy a 4K one?
Any sort of timeframe for the firmware to enable all the hdmi 2.1 features?
So i watched tho whole video, and the Yamaha a8 looks excited, but can you answer this question for me, in an old video of yours where you where at arcams booth the showed their new line up the avr10 /20 and so on Arcam told you the chose for their avr 10 to be 7 channel powerd, and the other 5 you can use an external amp they could power all the channels but their would be quality los.
The Yamaha all 11 channels are powerd
What’s you opinion on this because I want one of the two Arcam plus amp or the a8
Hope you can give me some advice
Finally gene satisfied with 5th foot 🤣
Can't wait for the next pre processor 😁
I wasnt sure if the %THD was mentioned?
My problem now is deciding which model to get. RX-A6A or RX-A8A?
...ah, based on what you wrote, I'd say you have already decided ;-) (6Ax2)
@@MrMindlink hahahaaha tks
Why not the a4a? For more channels?
Does anyone know if the relays make loud clicking sounds on the new Yamahas when changing sound field modes - like on my Denon? Man that is fricking annoying…
Hi I have the Yamaha RX-A1050 receiver. What’s the best crossover setting for LF. My sub is Velodyn SPL1000. I tried setting the speakers to small at 60Hz and sub to direct so the receiver does all base management. Also on the PEQ for sub, what would be the best frequency settings
Sadly, there isn't a direct answer to your question. Bass management is a complex issue and TOTALLY depends on YOUR room and where you place things. You might check out this video: th-cam.com/video/OPA6tvrqx6A/w-d-xo.html Audioholics has a LOT of videos about this subject and are some the best out there for explaining it as simply as possible. It's FAR from a push button system no matter who's equipment you have. Search "Bass management" on the Audioholics channel here on TH-cam. Cheers!
Thanks for the video.
Mr Gene I have a query for you.
As it says in the video, you will be getting an A6 later this month, if you'll be so kind see if you can clear up the subject of the subwoofer PEQs.
It is my pleasure to know exactly what YPAO does and whether later these corrections can be copied and the subwoofer part worked manually with the help of programs like Room EQ Wizard.
That in the video is not clear and there is the question in the power of the YPAO EQ
Written with Google translate
Greetings
YPAO LFM finds the room modes for you. You have to manually go in and apply EQ cuts to those frequencies. I believe you can copy the fullrange YPAO correction into manual and then do the LFM manual adjustments in that setting if you like.
With these new receivers, have Yamaha removed the cross-upmixer limitation imposed by Dolby? But has since been rescinded? i.e. being able to use DTS' Neural:X to UpMix a Dolby Digital+ or Dolby TrueHD 5.1 or 7.1 signal?
One comment mentioned that Auro3D is available in the 6A and the 8A. Does that answer your question a little? I'm interested in the same topic but I'm a bit out of date. I have a DSP-A3090 with dual center channels, and while it helps with vocals to the middle of the TV it leaves me wanting for more center channel spread to the mains.
what you think marantz SR 8015 or Yamaha RX a8a ?
Interested in signal to noise ratio, power in each channel, Distortion as a function of power and frequency... what I want is a wire with gain out of an amplifier, currently using flagship Denon anniversary receiver but need a new receiver for another system, and the Denon is no longer available.... I have great respect for Yamaha and may pick one of these up, but the SINAD is important to me.
Also, country of manufacture matters, Japan is great, but i doubt these are made in Japan at these low price points... hopefully Taiwan, i won't buy made in CHINA.
@@themaskedsingercucucachu8225 Malaysia I think
@@totalplonker824 I had the 6700, an early one off the assembly line, I sent it back, it ended up costing me 500 bucks in a restocking fee. It was junk... the A110 amp and receiver are a cut above. Deadly silent operation, take care.
@@totalplonker824 the heat could be a problem... unless you use a fan to evacuate a sealed cabinet. Imagine a light bulb in the sealed cabinet.... see what I mean?
@@slyfoxx8540 Yikes, i was just sent an article about forced labor in electronics factories in Malaysia... I can't get behind slavery.
How does Anthem MRX-540 compare to the Avantage?
I wish they would get away from ypao. After using Dirac live and ARC genesis it just can't keep up. It's a shame because these look like killer receivers.
Does anyone know what brand/model DACs this new line of Yamaha receivers will be using?
Sabre pros ! x2
Gene whats the price for this Receiver?
Looks good, just that it isn't "AI" it's actually machine learning. Wanted to point that out as true "AI" is a ways off, especially for a consumer product. However the innovation is impressive!
Build quality looks great. Major letdown they still using that crappy ypao. If they would have put dirac on this new line it would be a grand slam.
I was thinking the same thing concerning Dirac. I have a Arcam AVR- 850 (bought used for $2,700) with Dirac that I have been using since 2017 and I must say I like using Dirac for the room correction over others that I have used. I am using the Arcam in my man cave and using a Pioneer SC-LX901 in our main viewing room. The Pioneer utilizes MCACC Pro software for speaker calibration that I have been using from 2017. Prior to the Arcam I was using a Denon 4311CI that was using the Audyssey MultEQ XT. I never liked the sound the Denon produced for 2 channel music listening with the Audyssey software on or off. In fact I started looking for new front and left speakers to replace my Mirage OMD-28's. One listening session at a Best Buy Magnolia Design Center when auditioning potential B&W speaker to replace my Mirages. It was then after listening to offerings from Denon, Marantz, Pioneer, Onkyo, and Arcam. All the aforementioned receivers were the top off the line or flagship models during that time frame. Other customers were in the listening room and all of the receivers had no room correction enabled and the bass and treble were in the neutral position. All were in agreeance the Arcam had the best sound for 2 channel music listening but they were also the most expensive.
Two things I wish this new Yamaha had is Dirac and the use of class D amplification. I have a Wyred 4 Sound (ST-MKII 1000, Power Output 8Ω @ 0.2% THD+N: 460W
Power Output 4Ω @ 0.2% THD+N: 725W) class D amp connected to my Arcam that provides power to the front left and right speakers. I would have liked Phil to expand upon what Yamaha is looking for in a class D amplification, I believe he said it would cost 11 or 12k for the Yamaha for the class D amplification they were considering. Over on the Audio Science forum there are various different class D modules getting rave reviews. One amp I am considering is the Benchmark AHB2. While not inexpensive at 3k it is highly recommended.
Anybody know if it also supports Dolby Vision at 4k 120hz?
Wow 5year warranty..... why on earth that in Thailand, we alway got 1yr. aarranty only ><
So envy you guys in US.
Any news on the ship date???
I have an A6A on pre-order.
Can’t wait to hear it.
How do you like it?
@@rumporridge1 I like the A6A a lot! My ears really like the Yamaha sound. The A6 offers many audio options to enjoy. To give my music a fresh sound, I find myself rotating between those options. Two-channel stereo, Atmos, Auto 3-D, All Channel Stereo, etc. SurroundAI sounds good as well. I have a finished room over our two car garage, with a 5.2.4 speaker setup.
@@soundisfun2238 brother you sold me. Putting in a pre paid order in a few weeks. Exactly what I was looking for. Stepping up from a Marantz SR5014. Love that the A6A/A8A has xlr in’s and out’s as well. Appreciate the quick reply too. Life is good!