86 Nissan d21. Hidden Wiring Harness for AC. Part2

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ต.ค. 2024

ความคิดเห็น • 26

  • @joseontiveros1600
    @joseontiveros1600 2 ปีที่แล้ว +2

    Hey thanks for that credit on the riley. And thanks but I don’t have any vides on my channel I don’t know how to upload them my nissan its same as yours.

    • @smoke3090
      @smoke3090 2 ปีที่แล้ว

      Carnal ocupo ayuda jajajja, ojalá hables español, mi camioneta trae el sistema de aire acondicionado listo, solo que el compresor no acciona, conectandolo directo de la pila si funciona, pero con el botón de la cabina no, cheque fusibles y esta bien, ahora sospecho que sea el relay, como se puentea para accionar el clutch? Tiene 4 cables 1 negro y 3 verdes, y otra pregunta, el cable que va del relay al compresor es el negro con linea blanca? Tengo 2 cables sueltos y uno de ellos va conectado por debajo del distribuidor y el otro al compresor pero no se cual jajaja, me acaban de reparar el motor y me hicieron un cochinero de cables

    • @joseontiveros1600
      @joseontiveros1600 2 ปีที่แล้ว +1

      @@smoke3090 no prende el compresor por q no lo as conectado que ano es la troca por que la mia el conector del comoresor es blanco la salida del cable de la troca no el de el compresor el cable pa que conectes el compresor esta donde esta el distribuidor de pende el año de tu troca por eso te pregunto

    • @smoke3090
      @smoke3090 2 ปีที่แล้ว

      @@joseontiveros1600 es 87 americana, solo que me le arrancaron el conector y solo tiene el cable pelón

    • @joseontiveros1600
      @joseontiveros1600 2 ปีที่แล้ว +1

      @@smoke3090 es igual q la mia entonces el cable del compresor conectalo a ese cable pelon juntos y ponle cinta negra ala tarde voy a subir un video de la mia en mi canal hay lo miras

  • @williamramos3323
    @williamramos3323 ปีที่แล้ว +1

    I have 1993 my a/c compresor not turn on I check everything the compressor is new can you help me

    • @almagam2099
      @almagam2099  ปีที่แล้ว

      I'll do my best. Try checking the ac relay. It should be poking out of the driver side fender wall. Next too the ignition coil and ignition control module.

    • @almagam2099
      @almagam2099  ปีที่แล้ว

      Another thing too check is freon level. I could be wrong, but if the freon is too low, the compressor won't engage.

  • @joseontiveros1600
    @joseontiveros1600 2 ปีที่แล้ว +1

    On the problem with the blower motor i went to auto zone they sell the same type of tape that you see in ther it has glue in one side and in the other has foam and you will cover those spaces good look i will try to add a. Video of my nissan for you to see it its a beautiful truck

    • @almagam2099
      @almagam2099  2 ปีที่แล้ว +1

      Thanks, I'll try and look for that tape at the local autozone! Uploading videos too TH-cam is easy! If you're doing it on your phone, look at the center, bottom of the screen (while on TH-cam) you'll see an upload symbol that looks like a plus sign surrounded by a circle! Click on it and you'll have the option to upload videos directly from your phone!

    • @joseontiveros1600
      @joseontiveros1600 2 ปีที่แล้ว +1

      @@almagam2099
      Hey i just uploaded a video of my nissan really don’t know how to do it but its my first one i my do more

    • @almagam2099
      @almagam2099  2 ปีที่แล้ว

      @@joseontiveros1600 awesome!!! I'll check it out!

  • @Joshua_Hammer777
    @Joshua_Hammer777 ปีที่แล้ว

    Have you ever put a clutch in yours or had transmission out I have a 96 transmission for my 86 just doing it shade tree mechanic style lol myself I hadn't done one in awhile do you bleed off slave cylinder pressure before you remove or only when you get the tranny back in will I have to just do it then just wondering appreciate any info

    • @almagam2099
      @almagam2099  ปีที่แล้ว +1

      Yes. I did the clutch on mine. But I did it while I had the engine out. So that made it really easy too install. If you have to completely open the lines or are installing slave cylinder. Use an object "I used a 4x4 piece of wood" too wedge between seat and clutch pedal. Essentially the clutch pedal is pressed too the floor the entire time. This will prevent brake fluid from gravity feeding too end of line. You'll be able too take your time with the install and not worry about brake fluid pouring all over the place.

    • @Joshua_Hammer777
      @Joshua_Hammer777 ปีที่แล้ว +1

      @@almagam2099 thanks how hard do you think it would be to put my z24i in 96 could you modify harness and change ecm or just change all harnesses and ecm I have a spotless parts truck andime is pretty rusted underneath

    • @almagam2099
      @almagam2099  ปีที่แล้ว +1

      @@Joshua_Hammer777 the physical swap would be the easy part. Dealing with the harness and ecm would be the hard part. You'd probably have to use the harness and ecm from the z24i engine.

    • @Joshua_Hammer777
      @Joshua_Hammer777 ปีที่แล้ว +1

      @@almagam2099 yeah the hardest part be through the dash appreciate the opinion take care... KY ✌️

  • @smoke3090
    @smoke3090 2 ปีที่แล้ว

    Hello, I hope you understand me, because I am translating this comment directly from google, my d21 has clutch activation problems, I think I already located the compressor relay, it is in the same location as yours and I want to make sure it is the same Could you tell me the colors of the wires that are connected to the relay !? And one more question, the cable that connects from the harness to the compressor is black with a white line? The system is ready only that the compressor does not operate unless its connect directly from the battery, and i even check fuses and it is fine.

    • @smoke3090
      @smoke3090 2 ปีที่แล้ว +1

      Sorry, I saw in the video that you took out the original wiring to renew it and I realized that the colors are the same

    • @almagam2099
      @almagam2099  2 ปีที่แล้ว +1

      @@smoke3090 glad you pretty much have your AC working! But yeah, the one wire is black w/white stripe going down it!

    • @smoke3090
      @smoke3090 2 ปีที่แล้ว

      Thank yooou, now my ac is working, I find the problem, my relay is not working because its very oooold hahahhaha

    • @almagam2099
      @almagam2099  2 ปีที่แล้ว

      @@smoke3090 glad you figured it out! 😁

    • @williamramos3323
      @williamramos3323 ปีที่แล้ว

      I have the same problem my compressor not turn on only direct form battery my truck is 1993 I’m looking for the relay but I don’t know if Diferent model

  • @bryanh22a3
    @bryanh22a3 ปีที่แล้ว

    Bro you hace whatsapp? I need help with my A/C harness 😢

    • @almagam2099
      @almagam2099  ปีที่แล้ว

      Sorry, I don't. Other than TH-cam, I'm on Facebook and Instagram. Let me know what you're having trouble with. I'll do my best too help.

    • @bryanh22a3
      @bryanh22a3 ปีที่แล้ว

      @@almagam2099 I wrote to you on IG