Wow! Cool software. I used to operate a ‘step4’ cnc Hotwire cutter at a model aircraft factory. Very primitive at the time but good. Still had to do the shark40 wings by hand though due to being elliptical. 😂🤣😂🤣
Olá. Estou montando um cnc hotwire. Gostei do seu programa. Tô com um pouco de dificuldade em acertar os pontos . Mesmo traduzindo ainda não acertei . Teria um vídeo de um corte de uma asa zagui de 500 mm de envergadura. E corda de 280.mm dimensões aproximadas. Para que eu possa intender melhor a configuração. Sou do Brasil e Aki não tem opção prática para cortes em isopor .
Its 0.25mm Nichrome wire at ≈1.3A. And yes, its very noisy. However as it only runs supervised and for short times the A4988 are just fine. Its a budget project after all.
Bonjour, je viens de découvrir votre vidéo et le boulot formidable fourni, comment lance t-on votre application, car dans le .ZIP il n'y a pas d'executable??? j'ai loupé quelque chose ? merci d'avance
You can check the dat file using a text editor, sometimes the files contain a title that messes up the import. Deleting it so that the dat only contains the coordinates helps. Also make sure you arent missing values anywere in the program. ( forgetting to put numbers in settings for example)
@@dodo3441 dat i found the problem. I opened note. Some dat files have 0.0000000 0.0000000 information in the first line, they give an error. The error disappeared when I deleted the first line. thanks for your efforts
Hello! i tried the software and it works pretty well! I tried a clark y airfoil yesterday and everything worked out! But then when i try to load in a MH61 airfoil it just says failure to load. I've tried reinstalling the dat file too. Do you know the problem? thanks, anton
You can try opening the dat file with a text editor and check if there is text in the file. Sometimes the airfoil name is included in the dat file and can mess witht the import. If thats the case you can just delete those rows from the file and save.
there is a little box you can check in wing config that says single wing. It will let you configure the left wing and then save gcodes for left and right.
Regarding your debate with Mike Clarkson in the comments section of Seek Truth Speak Truth's video "How I realised the Earth is NOT Flat - Professor Dave Explains": You may be interested in seeing Mike's behavior in the thread that Mike started in the comments section of Seek Truth Speak Truth's video, "Dissecting Del - The words and ways he manipulates his followers." Mike's initial post begins "It's a valid point at the beginning. Back in the 60s we got men to the moon six times."
Wow! Cool software. I used to operate a ‘step4’ cnc Hotwire cutter at a model aircraft factory. Very primitive at the time but good. Still had to do the shark40 wings by hand though due to being elliptical. 😂🤣😂🤣
I built this machine and thank you for sharing, great job!
Glad to hear!
Congratulations. Great job! God bless you.
Awesome👌
Beautiful!
Hi there ,, can i use it for 2d hot wair fome cutter ?
Olá. Estou montando um cnc hotwire. Gostei do seu programa. Tô com um pouco de dificuldade em acertar os pontos . Mesmo traduzindo ainda não acertei . Teria um vídeo de um corte de uma asa zagui de 500 mm de envergadura. E corda de 280.mm dimensões aproximadas. Para que eu possa intender melhor a configuração. Sou do Brasil e Aki não tem opção prática para cortes em isopor .
Nice video... little bit noizy... would change to tmc drivers....
What kind of wire do you use? which diameter? Voltage?
Its 0.25mm Nichrome wire at ≈1.3A.
And yes, its very noisy. However as it only runs supervised and for short times the A4988 are just fine. Its a budget project after all.
Bonjour, je viens de découvrir votre vidéo et le boulot formidable fourni, comment lance t-on votre application, car dans le .ZIP il n'y a pas d'executable??? j'ai loupé quelque chose ? merci d'avance
Hi , thank you for program , i cant upload airfoil ,' sometihing went worng' fail message .
why am ı getting this u values exeed axis limit error?
how do you extract the .jar file !!!!
The program is very nice but when I upload the dat file it says an unexpected error occurred. I couldn't create gcodecode. I'm using win 8.1.
You can check the dat file using a text editor, sometimes the files contain a title that messes up the import. Deleting it so that the dat only contains the coordinates helps. Also make sure you arent missing values anywere in the program. ( forgetting to put numbers in settings for example)
@@dodo3441 dat i found the problem. I opened note. Some dat files have 0.0000000 0.0000000 information in the first line, they give an error. The error disappeared when I deleted the first line. thanks for your efforts
Wow, ich bin echt schwer beeindruckt :-)
Hello! i tried the software and it works pretty well! I tried a clark y airfoil yesterday and everything worked out! But then when i try to load in a MH61 airfoil it just says failure to load. I've tried reinstalling the dat file too. Do you know the problem? thanks, anton
You can try opening the dat file with a text editor and check if there is text in the file. Sometimes the airfoil name is included in the dat file and can mess witht the import. If thats the case you can just delete those rows from the file and save.
@@dodo3441 okay i'll try! thanks for a really fast answer!
that worked!
Stopping by #feismainstream
Nice,,
hello do do do Is it available for download?
Links are in the description
@@dodo3441 thank you your project is very good i'm almost finishing my
kkkkkkkk
great job
Where do i get the airfoil files
Great work 👍
All sorts of webistes, forum Threads etc. airfoiltools.com/airfoil/index
Thanks now it worked
But how do i cut only one wing out?
there is a little box you can check in wing config that says single wing. It will let you configure the left wing and then save gcodes for left and right.
@@dodo3441 thanks
Confirmed you were at jan 6 coup
I think you might have severely misinterpreted the video mate ;)
@@dodo3441 bazinga
Regarding your debate with Mike Clarkson in the comments section of Seek Truth Speak Truth's video "How I realised the Earth is NOT Flat - Professor Dave Explains": You may be interested in seeing Mike's behavior in the thread that Mike started in the comments section of Seek Truth Speak Truth's video, "Dissecting Del - The words and ways he manipulates his followers." Mike's initial post begins "It's a valid point at the beginning. Back in the 60s we got men to the moon six times."
Yeah he seems very troll-y
i like here, shall we be friends💎🔔