I would of put more coats of clear on the bad areas with no thinners until it filled and flowed over the micro pin holes .Give them a low temp bake after a extended flash off so no risk of the micro pin holes blowing bubbles .Then the next day guide coat with a light grey or white cellulose primer .Wet flat down with 600 and then 1200 untill the guide coat is gone and then recoat . Sometimes a piss coat of over thinned clear sometimes fills micro pin holes before putting on the base coat .It also shows up the pin holes before committing to basecoat. In a mixing cup activate the clear as normal with fast activator so you have say a inch of clear in the cup then take the thinners upto say 5 inches . Is it water based base coat or solvent ? Solvent is way better at filling minor imperfections and it can be flatted more or less instantly.
Why would you use 440 express over clear ? It's mainly for pinholes in filler or primer ?? Over clear then you would have to re-prime.. re-base..reclear ..?
@@therealdeal4492 hi, wasn't saying to use it over clear the idea is to use it to prevent pin holes in the jobs that he does in the future. The jobs in the video would have been reworked and out the door before the evercoat 440 landed on the doorstep.
I've heard good things about the ANI F160, Peter from Pete's Hobbies has one and he loves it as it does everything from high build, base and clear it's a good budget all rounder👌 Just picked up a new Sata 100B with a 1.8 for primer and 1.4 for WoW but it lays down clearcoat lovely now I'm going to feel guilty using it for primer🙄😂
JOHN I KNOW PETE I HAVE THE ANI160Q HAVENT USED IT YET BUT I HAVE SEEN OFF PETE JOHN THE KIWAMI 4 BAJ 1.3 ON YOU TUBE ITS A KILLER ON BASE AND CLEAR COAT SO IS THE ANEST IWATA WBX 1.4
ROB I HAVE THE ANI 160Q MATE FROM SPRAY GUNS DIRECT BUT I HAVE THE Anest Iwata KIWAMI 4-13BA4 1.3mm THATS GOOD ROB FOR BASE AND CLEAR WILL I GET A GOOD FINISH ROB WITH KAPCI CLEAR COAT 6030 NO THINNERS JUST HARDNER
I would of put more coats of clear on the bad areas with no thinners until it filled and flowed over the micro pin holes .Give them a low temp bake after a extended flash off so no risk of the micro pin holes blowing bubbles .Then the next day guide coat with a light grey or white cellulose primer .Wet flat down with 600 and then 1200 untill the guide coat is gone and then recoat .
Sometimes a piss coat of over thinned clear sometimes fills micro pin holes before putting on the base coat .It also shows up the pin holes before committing to basecoat.
In a mixing cup activate the clear as normal with fast activator so you have say a inch of clear in the cup then take the thinners upto say 5 inches .
Is it water based base coat or solvent ? Solvent is way better at filling minor imperfections and it can be flatted more or less instantly.
Evercoat 440 express works well for micro pinholes. Wipe it on with a cloth and forget about them.
That looks brilliant gear .Never seen it before.
Nice one will see if they can get it in 🤞
Why would you use 440 express over clear ? It's mainly for pinholes in filler or primer ??
Over clear then you would have to re-prime.. re-base..reclear ..?
@@therealdeal4492 hi, wasn't saying to use it over clear the idea is to use it to prevent pin holes in the jobs that he does in the future. The jobs in the video would have been reworked and out the door before the evercoat 440 landed on the doorstep.
What is the tip size dred
Awesome video. Spray gunner is sellling richpens know .theres a richpen air gun
Nice will have a look
I've heard good things about the ANI F160, Peter from Pete's Hobbies has one and he loves it as it does everything from high build, base and clear it's a good budget all rounder👌
Just picked up a new Sata 100B with a 1.8 for primer and 1.4 for WoW but it lays down clearcoat lovely now I'm going to feel guilty using it for primer🙄😂
Hi John always wanted to try a sata may be one day as for the ani I think it's a cracking gun for the price 😀
JOHN I KNOW PETE I HAVE THE ANI160Q HAVENT USED IT YET BUT I HAVE SEEN OFF PETE JOHN THE KIWAMI 4 BAJ 1.3 ON YOU TUBE ITS A KILLER ON BASE AND CLEAR COAT SO IS THE ANEST IWATA WBX 1.4
Pity about that problem rob but my old man says these things happen from time to time he calls it character building say hi to nes
Yes will do got the dinner on right now 😋
Not on par with the DV1 mate for longevity but puts down a decent coat mate that's my opinion Rob others may differ 👍👍👍👍
Yes mate a know 👍the dv1 is something else 👌but for the money the ani will smash a coat down and a good one two 😉
@@dredfxcustompaint true mukka true
Keep thinking about getting one of these guns, everyone says they are air thirsty and don’t know if my compressor which has 10.8 fad will run it.
I would go for the 1.3mm set up 2bar pressure for your clear coat and run it around 20/22 psi for your base coat 😉 job done
ROB I HAVE THE ANI 160Q MATE FROM SPRAY GUNS DIRECT BUT I HAVE THE Anest Iwata KIWAMI 4-13BA4 1.3mm THATS GOOD ROB FOR BASE AND CLEAR WILL I GET A GOOD FINISH ROB WITH KAPCI CLEAR COAT 6030 NO THINNERS JUST HARDNER
Hi Andy yes you will get a good finish with the kapci 6030 no thinners I would heat the clear up mate 👍
💯👍👍👍
Big shame about that but it's the game we're in onwards and upwards mukka
What color blue is that I want to paint my truck that color
It's maserati blue will have a code up in a post next week